Hi Loic,
On 2020-11-23 06:11 AM, Loic Poulain wrote:
Add support for resetting the device, reset can be triggered in case
of error or manually via sysfs (/sys/bus/pci/devices/*/reset).
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
drivers/bus/mhi/pci_generic.c | 117
+++++++++++++++++++++++++++++++++++++-----
1 file changed, 104 insertions(+), 13 deletions(-)
diff --git a/drivers/bus/mhi/pci_generic.c
b/drivers/bus/mhi/pci_generic.c
index 0c07cf5..b48c382 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -8,6 +8,7 @@
* Copyright (C) 2020 Linaro Ltd <loic.poulain@xxxxxxxxxx>
*/
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mhi.h>
#include <linux/module.h>
@@ -179,6 +180,16 @@ static const struct pci_device_id
mhi_pci_id_table[] = {
};
MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
+enum mhi_pci_device_status {
+ MHI_PCI_DEV_STARTED,
+};
+
+struct mhi_pci_device {
+ struct mhi_controller mhi_cntrl;
+ struct pci_saved_state *pci_state;
+ unsigned long status;
+};
+
static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl,
void __iomem *addr, u32 *out)
{
@@ -203,6 +214,20 @@ static inline void mhi_pci_reset(struct
mhi_controller *mhi_cntrl)
writel(1, mhi_cntrl->regs + DEV_RESET_REG);
}
+static bool mhi_pci_is_alive(struct mhi_controller *mhi_cntrl)
+{
+ struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+ u16 vendor = 0;
+
+ if (pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor))
+ return false;
+
+ if (vendor == (u16) ~0 || vendor == 0)
+ return false;
+
+ return true;
+}
+
static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
unsigned int bar_num, u64 dma_mask)
{
@@ -298,16 +323,18 @@ static int mhi_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *)
id->driver_data;
const struct mhi_controller_config *mhi_cntrl_config;
+ struct mhi_pci_device *mhi_pdev;
struct mhi_controller *mhi_cntrl;
int err;
dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name);
- mhi_cntrl = mhi_alloc_controller();
- if (!mhi_cntrl)
+ mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL);
+ if (!mhi_pdev)
return -ENOMEM;
Were you able to look in to using alloc/free APIs? We do want to mandate
these for any controller as they would read garbage serial/OEM PK HASH
values
if they were to not abide by it and end up using kmalloc instead of
kzalloc.
We understand you're using kzalloc but it still deviates from furthering
our
recommendations of using exported APIs.
mhi_cntrl_config = info->config;
+ mhi_cntrl = &mhi_pdev->mhi_cntrl;
mhi_cntrl->cntrl_dev = &pdev->dev;
mhi_cntrl->iova_start = 0;
mhi_cntrl->iova_stop = DMA_BIT_MASK(info->dma_data_width);
@@ -322,17 +349,21 @@ static int mhi_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
err = mhi_pci_claim(mhi_cntrl, info->bar_num,
DMA_BIT_MASK(info->dma_data_width));
if (err)
- goto err_release;
+ return err;
err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config);
if (err)
- goto err_release;
+ return err;
+
+ pci_set_drvdata(pdev, mhi_pdev);
- pci_set_drvdata(pdev, mhi_cntrl);
+ /* Have stored pci confspace at hand for restore in sudden PCI error
*/
+ pci_save_state(pdev);
+ mhi_pdev->pci_state = pci_store_saved_state(pdev);
err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
if (err)
- goto err_release;
+ return err;
/* MHI bus does not power up the controller by default */
err = mhi_prepare_for_power_up(mhi_cntrl);
@@ -347,37 +378,97 @@ static int mhi_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
goto err_unprepare;
}
+ set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+
return 0;
err_unprepare:
mhi_unprepare_after_power_down(mhi_cntrl);
err_unregister:
mhi_unregister_controller(mhi_cntrl);
-err_release:
- mhi_free_controller(mhi_cntrl);
return err;
}
static void mhi_pci_remove(struct pci_dev *pdev)
{
- struct mhi_controller *mhi_cntrl = pci_get_drvdata(pdev);
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, true);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ }
- mhi_power_down(mhi_cntrl, true);
- mhi_unprepare_after_power_down(mhi_cntrl);
mhi_unregister_controller(mhi_cntrl);
/* MHI-layer reset could not be enough, always hard-reset the device
*/
mhi_pci_reset(mhi_cntrl);
+}
+
+void mhi_pci_reset_prepare(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ dev_info(&pdev->dev, "reset\n");
- mhi_free_controller(mhi_cntrl);
+ /* Clean up MHI state */
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, false);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ }
+
+ /* cause internal device reset */
+ mhi_pci_reset(mhi_cntrl);
+
+ /* Be sure device reset has been executed */
+ msleep(500);
}
+void mhi_pci_reset_done(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+ int err;
+
+ /* Restore initial known working PCI state */
+ pci_load_saved_state(pdev, mhi_pdev->pci_state);
+ pci_restore_state(pdev);
+
+ /* Is device status available ? */
+ if (!mhi_pci_is_alive(mhi_cntrl)) {
+ dev_err(&pdev->dev, "reset failed\n");
+ return;
+ }
+
+ err = mhi_prepare_for_power_up(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to prepare MHI controller\n");
+ return;
+ }
+
+ err = mhi_sync_power_up(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to power up MHI controller\n");
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ return;
+ }
+
+ set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+}
+
+static const struct pci_error_handlers mhi_pci_err_handler = {
+ .reset_prepare = mhi_pci_reset_prepare,
+ .reset_done = mhi_pci_reset_done,
+};
+
static struct pci_driver mhi_pci_driver = {
.name = "mhi-pci-generic",
.id_table = mhi_pci_id_table,
.probe = mhi_pci_probe,
- .remove = mhi_pci_remove
+ .remove = mhi_pci_remove,
+ .err_handler = &mhi_pci_err_handler,
};
module_pci_driver(mhi_pci_driver);
Thanks,
Bhaumik
---
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
