There's a proximity sensor on Lazor devices, but only for LTE SKUs. Enable it only on the LTE SKUs and also configure it properly so it works. Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- Changes from v1 (https://lore.kernel.org/r/20201118045454.2503325-1-swboyd@xxxxxxxxxxxx): * Fixed startup-sensor property to be 0 instead of 1 * Fixed proxraw-strength to be 8 instead of 2 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 8 ++++++++ arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 8 ++++++++ arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 7 ++++++- 3 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts index 5a67e5baafec..e16ba7b01f25 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -13,6 +13,14 @@ / { compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; }; +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + &keyboard_backlight { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index 43836fc4d403..0881f8dd02c9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -13,6 +13,14 @@ / { compatible = "google,lazor-sku0", "qcom,sc7180"; }; +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + &keyboard_backlight { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 180ef9e04306..89e5cd29ec09 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -30,7 +30,12 @@ panel_in_edp: endpoint { }; &ap_sar_sensor { - status = "okay"; + semtech,cs0-ground; + semtech,combined-sensors = <3>; + semtech,resolution = "fine"; + semtech,startup-sensor = <0>; + semtech,proxraw-strength = <8>; + semtech,avg-pos-strength = <64>; }; ap_ts_pen_1v8: &i2c4 { base-commit: ead9f7d7ea9e20843e29e688b53859cea20044ee -- https://chromeos.dev
