[PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series adds support for parsing the partitions defined in Shared
Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
Current parser only supports V3 and V4 of the partition tables.

This series has been tested on SDX55 MTP board which has an onboard NAND
device.

Thanks,
Mani

Changes in v3:

* Handled le32 parameters in parser, collected review from Linus W.

Changes in v2:

* Added additionalProperties: false and removed unit address in binding

Manivannan Sadhasivam (4):
  dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser
  mtd: parsers: Add Qcom SMEM parser
  mtd: rawnand: qcom: Add support for Qcom SMEM parser
  mtd: parsers: afs: Fix freeing the part name memory in failure

 .../mtd/partitions/qcom,smem-part.yaml        |  33 ++++
 drivers/mtd/nand/raw/qcom_nandc.c             |   4 +-
 drivers/mtd/parsers/Kconfig                   |   8 +
 drivers/mtd/parsers/Makefile                  |   1 +
 drivers/mtd/parsers/afs.c                     |   4 +-
 drivers/mtd/parsers/qcomsmempart.c            | 170 ++++++++++++++++++
 6 files changed, 216 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
 create mode 100644 drivers/mtd/parsers/qcomsmempart.c

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux