In current design, whenever the BHI interrupt is fired, the execution
environment is updated. This can cause race conditions and impede any
ongoing power up/down processing. For example, if a power down is in
progress and the host has updated the execution environment to a
local "disabled" state, any BHI interrupt firing later could replace
it with the value from the BHI EE register. Another example would be
that the device can enter mission mode while device creation for SBL
is still going on, leading to multiple attempts at opening the same
channel.
Ensure that EE changes are handled only from appropriate places and
occur one after another and handle only PBL or RDDM EE changes as
critical events directly from the interrupt handler. This also makes
sure that we use the correct execution environment to notify the
controller driver when the device resets to one of the PBL execution
environments.
Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
---
drivers/bus/mhi/core/main.c | 14 ++++++++------
drivers/bus/mhi/core/pm.c | 6 ++++--
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 4eb93d8..cd712f2 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -377,7 +377,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
struct device *dev = &mhi_cntrl->mhi_dev->dev;
enum mhi_state state = MHI_STATE_MAX;
enum mhi_pm_state pm_state = 0;
- enum mhi_ee_type ee = 0;
+ enum mhi_ee_type ee = MHI_EE_MAX;
write_lock_irq(&mhi_cntrl->pm_lock);
if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
@@ -386,8 +386,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
}
state = mhi_get_mhi_state(mhi_cntrl);
- ee = mhi_cntrl->ee;
- mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+ ee = mhi_get_exec_env(mhi_cntrl);
dev_dbg(dev, "local ee:%s device ee:%s dev_state:%s\n",
TO_MHI_EXEC_STR(mhi_cntrl->ee), TO_MHI_EXEC_STR(ee),
TO_MHI_STATE_STR(state));
@@ -405,8 +404,9 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
if (!mhi_is_active(mhi_cntrl))
goto exit_intvec;
- if (mhi_cntrl->ee == MHI_EE_RDDM && mhi_cntrl->ee != ee) {
+ if (ee == MHI_EE_RDDM && mhi_cntrl->ee != MHI_EE_RDDM) {
mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
+ mhi_cntrl->ee = ee;
wake_up_all(&mhi_cntrl->state_event);
}
goto exit_intvec;
@@ -416,10 +416,12 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
wake_up_all(&mhi_cntrl->state_event);
/* For fatal errors, we let controller decide next step */
- if (MHI_IN_PBL(ee))
+ if (MHI_IN_PBL(ee)) {
mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_FATAL_ERROR);
- else
+ mhi_cntrl->ee = ee;
+ } else {
mhi_pm_sys_err_handler(mhi_cntrl);
+ }
}
exit_intvec:
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index aa156b9..c1b18d6 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -377,20 +377,22 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
{
struct mhi_event *mhi_event;
struct device *dev = &mhi_cntrl->mhi_dev->dev;
+ enum mhi_ee_type ee = MHI_EE_MAX;
int i, ret;
dev_dbg(dev, "Processing Mission Mode transition\n");
write_lock_irq(&mhi_cntrl->pm_lock);
if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
- mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+ ee = mhi_get_exec_env(mhi_cntrl);
- if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee)) {
+ if (!MHI_IN_MISSION_MODE(ee)) {
mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
write_unlock_irq(&mhi_cntrl->pm_lock);
wake_up_all(&mhi_cntrl->state_event);
return -EIO;
}
+ mhi_cntrl->ee = ee;
write_unlock_irq(&mhi_cntrl->pm_lock);
wake_up_all(&mhi_cntrl->state_event);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
