The Hisilicon 6421v600 SPMI driver is ready for mainstream. So, move it from staging. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- .../spmi/hisilicon,hisi-spmi-controller.yaml | 62 +++ MAINTAINERS | 7 + drivers/spmi/Kconfig | 9 + drivers/spmi/Makefile | 1 + drivers/spmi/hisi-spmi-controller.c | 358 ++++++++++++++++++ drivers/staging/hikey9xx/Kconfig | 11 - drivers/staging/hikey9xx/Makefile | 1 - .../staging/hikey9xx/hisi-spmi-controller.c | 358 ------------------ .../hisilicon,hisi-spmi-controller.yaml | 62 --- 9 files changed, 437 insertions(+), 432 deletions(-) create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml create mode 100644 drivers/spmi/hisi-spmi-controller.c delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml new file mode 100644 index 000000000000..f2a56fa4e78e --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon SPMI controller + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> + +description: | + The HiSilicon SPMI BUS controller is found on some Kirin-based designs. + It is a MIPI System Power Management (SPMI) controller. + + The PMIC part is provided by + drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + +properties: + $nodename: + pattern: "spmi@[0-9a-f]" + + compatible: + const: hisilicon,kirin970-spmi-controller + + reg: + maxItems: 1 + + spmi-channel: + description: | + number of the Kirin 970 SPMI channel where the SPMI devices are connected. + +required: + - compatible + - reg + - spmi-channel + +patternProperties: + "^pmic@[0-9a-f]$": + description: | + PMIC properties, which are specific to the used SPMI PMIC device(s). + When used in combination with HiSilicon 6421v600, the properties + are documented at + drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + status = "ok"; + reg = <0x0 0xfff24000 0x0 0x1000>; + spmi-channel = <2>; + + pmic@0 { + /* pmic properties */ + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 14266bb79ff8..14bc7b45ed50 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7987,6 +7987,13 @@ F: drivers/crypto/hisilicon/sec2/sec_crypto.c F: drivers/crypto/hisilicon/sec2/sec_crypto.h F: drivers/crypto/hisilicon/sec2/sec_main.c +HISILICON SPMI CONTROLLER DRIVER FOR HIKEY 970 +M: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> +L: linux-kernel@xxxxxxxxxxxxxxx +S: Maintained +F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml +F: drivers/spmi/hisi-spmi-controller.c + HISILICON STAGING DRIVERS FOR HIKEY 960/970 M: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> L: devel@xxxxxxxxxxxxxxxxxxxx diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index a53bad541f1a..2874b6c26028 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -11,6 +11,15 @@ menuconfig SPMI if SPMI +config SPMI_HISI3670 + tristate "Hisilicon 3670 SPMI Controller" + select IRQ_DOMAIN_HIERARCHY + depends on HAS_IOMEM + help + If you say yes to this option, support will be included for the + built-in SPMI PMIC Arbiter interface on Hisilicon 3670 + processors. + config SPMI_MSM_PMIC_ARB tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)" select IRQ_DOMAIN_HIERARCHY diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile index 55a94cadeffe..6e092e6f290c 100644 --- a/drivers/spmi/Makefile +++ b/drivers/spmi/Makefile @@ -4,4 +4,5 @@ # obj-$(CONFIG_SPMI) += spmi.o +obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c new file mode 100644 index 000000000000..f831c43f4783 --- /dev/null +++ b/drivers/spmi/hisi-spmi-controller.c @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spmi.h> + +/* + * SPMI register addr + */ +#define SPMI_CHANNEL_OFFSET 0x0300 +#define SPMI_SLAVE_OFFSET 0x20 + +#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100 + +#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104 +#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108 +#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c +#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110 + +#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200 + +#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204 +#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208 +#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c +#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210 + +#define SPMI_PER_DATAREG_BYTE 4 +/* + * SPMI cmd register + */ +#define SPMI_APB_SPMI_CMD_EN BIT(31) +#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24 +#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20 +#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16 +#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0 + +/* Command Opcodes */ + +enum spmi_controller_cmd_op_code { + SPMI_CMD_REG_ZERO_WRITE = 0, + SPMI_CMD_REG_WRITE = 1, + SPMI_CMD_REG_READ = 2, + SPMI_CMD_EXT_REG_WRITE = 3, + SPMI_CMD_EXT_REG_READ = 4, + SPMI_CMD_EXT_REG_WRITE_L = 5, + SPMI_CMD_EXT_REG_READ_L = 6, + SPMI_CMD_REG_RESET = 7, + SPMI_CMD_REG_SLEEP = 8, + SPMI_CMD_REG_SHUTDOWN = 9, + SPMI_CMD_REG_WAKEUP = 10, +}; + +/* + * SPMI status register + */ +#define SPMI_APB_TRANS_DONE BIT(0) +#define SPMI_APB_TRANS_FAIL BIT(2) + +/* Command register fields */ +#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16 + +/* Maximum number of support PMIC peripherals */ +#define SPMI_CONTROLLER_TIMEOUT_US 1000 +#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16 + +struct spmi_controller_dev { + struct spmi_controller *controller; + struct device *dev; + void __iomem *base; + spinlock_t lock; + u32 channel; +}; + +static int spmi_controller_wait_for_done(struct device *dev, + struct spmi_controller_dev *ctrl_dev, + void __iomem *base, u8 sid, u16 addr) +{ + u32 timeout = SPMI_CONTROLLER_TIMEOUT_US; + u32 status, offset; + + offset = SPMI_APB_SPMI_STATUS_BASE_ADDR; + offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid; + + do { + status = readl(base + offset); + + if (status & SPMI_APB_TRANS_DONE) { + if (status & SPMI_APB_TRANS_FAIL) { + dev_err(dev, "%s: transaction failed (0x%x)\n", + __func__, status); + return -EIO; + } + dev_dbg(dev, "%s: status 0x%x\n", __func__, status); + return 0; + } + udelay(1); + } while (timeout--); + + dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status); + return -ETIMEDOUT; +} + +static int spmi_read_cmd(struct spmi_controller *ctrl, + u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc) +{ + struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); + u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; + unsigned long flags; + u8 *buf = __buf; + u32 cmd, data; + int rc; + u8 op_code, i; + + if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { + dev_err(&ctrl->dev, + "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", + SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); + return -EINVAL; + } + + switch (opc) { + case SPMI_CMD_READ: + op_code = SPMI_CMD_REG_READ; + break; + case SPMI_CMD_EXT_READ: + op_code = SPMI_CMD_EXT_REG_READ; + break; + case SPMI_CMD_EXT_READL: + op_code = SPMI_CMD_EXT_REG_READ_L; + break; + default: + dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc); + return -EINVAL; + } + + cmd = SPMI_APB_SPMI_CMD_EN | + (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | + ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | + ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */ + ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */ + + spin_lock_irqsave(&spmi_controller->lock, flags); + + writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); + + rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, + spmi_controller->base, slave_id, slave_addr); + if (rc) + goto done; + + for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { + data = readl(spmi_controller->base + chnl_ofst + + SPMI_SLAVE_OFFSET * slave_id + + SPMI_APB_SPMI_RDATA0_BASE_ADDR + + i * SPMI_PER_DATAREG_BYTE); + data = be32_to_cpu((__be32)data); + if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { + memcpy(buf, &data, sizeof(data)); + buf += sizeof(data); + } else { + memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE); + buf += (bc % SPMI_PER_DATAREG_BYTE); + } + } + +done: + spin_unlock_irqrestore(&spmi_controller->lock, flags); + if (rc) + dev_err(&ctrl->dev, + "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", + opc, slave_id, slave_addr, bc + 1); + else + dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n", + __func__, slave_id, slave_addr, (int)bc, __buf); + + return rc; +} + +static int spmi_write_cmd(struct spmi_controller *ctrl, + u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc) +{ + struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); + u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; + const u8 *buf = __buf; + unsigned long flags; + u32 cmd, data; + int rc; + u8 op_code, i; + + if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { + dev_err(&ctrl->dev, + "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", + SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); + return -EINVAL; + } + + switch (opc) { + case SPMI_CMD_WRITE: + op_code = SPMI_CMD_REG_WRITE; + break; + case SPMI_CMD_EXT_WRITE: + op_code = SPMI_CMD_EXT_REG_WRITE; + break; + case SPMI_CMD_EXT_WRITEL: + op_code = SPMI_CMD_EXT_REG_WRITE_L; + break; + default: + dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc); + return -EINVAL; + } + + cmd = SPMI_APB_SPMI_CMD_EN | + (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | + ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | + ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | + ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); + + /* Write data to FIFOs */ + spin_lock_irqsave(&spmi_controller->lock, flags); + + for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { + data = 0; + if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { + memcpy(&data, buf, sizeof(data)); + buf += sizeof(data); + } else { + memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE); + buf += (bc % SPMI_PER_DATAREG_BYTE); + } + + writel((u32)cpu_to_be32(data), + spmi_controller->base + chnl_ofst + + SPMI_APB_SPMI_WDATA0_BASE_ADDR + + SPMI_PER_DATAREG_BYTE * i); + } + + /* Start the transaction */ + writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); + + rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, + spmi_controller->base, slave_id, + slave_addr); + spin_unlock_irqrestore(&spmi_controller->lock, flags); + + if (rc) + dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", + opc, slave_id, slave_addr, bc); + else + dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n", + __func__, slave_id, slave_addr, (int)bc, __buf); + + return rc; +} + +static int spmi_controller_probe(struct platform_device *pdev) +{ + struct spmi_controller_dev *spmi_controller; + struct spmi_controller *ctrl; + struct resource *iores; + int ret; + + ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller)); + if (!ctrl) { + dev_err(&pdev->dev, "can not allocate spmi_controller data\n"); + return -ENOMEM; + } + spmi_controller = spmi_controller_get_drvdata(ctrl); + spmi_controller->controller = ctrl; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) { + dev_err(&pdev->dev, "can not get resource!\n"); + return -EINVAL; + } + + spmi_controller->base = devm_ioremap(&pdev->dev, iores->start, + resource_size(iores)); + if (!spmi_controller->base) { + dev_err(&pdev->dev, "can not remap base addr!\n"); + return -EADDRNOTAVAIL; + } + + ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel", + &spmi_controller->channel); + if (ret) { + dev_err(&pdev->dev, "can not get channel\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, spmi_controller); + dev_set_drvdata(&ctrl->dev, spmi_controller); + + spin_lock_init(&spmi_controller->lock); + + ctrl->nr = spmi_controller->channel; + ctrl->dev.parent = pdev->dev.parent; + ctrl->dev.of_node = of_node_get(pdev->dev.of_node); + + /* Callbacks */ + ctrl->read_cmd = spmi_read_cmd; + ctrl->write_cmd = spmi_write_cmd; + + ret = spmi_controller_add(ctrl); + if (ret) + dev_err(&pdev->dev, "spmi_add_controller failed with error %d!\n", ret); + + return ret; +} + +static int spmi_del_controller(struct platform_device *pdev) +{ + struct spmi_controller *ctrl = platform_get_drvdata(pdev); + + spmi_controller_remove(ctrl); + kfree(ctrl); + return 0; +} + +static const struct of_device_id spmi_controller_match_table[] = { + { + .compatible = "hisilicon,kirin970-spmi-controller", + }, + {} +}; +MODULE_DEVICE_TABLE(of, spmi_controller_match_table); + +static struct platform_driver spmi_controller_driver = { + .probe = spmi_controller_probe, + .remove = spmi_del_controller, + .driver = { + .name = "hisi_spmi_controller", + .of_match_table = spmi_controller_match_table, + }, +}; + +static int __init spmi_controller_init(void) +{ + return platform_driver_register(&spmi_controller_driver); +} +postcore_initcall(spmi_controller_init); + +static void __exit spmi_controller_exit(void) +{ + platform_driver_unregister(&spmi_controller_driver); +} +module_exit(spmi_controller_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("1.0"); +MODULE_ALIAS("platform:spmi_controller"); diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig index 0e97b5b9a56a..69392e42cd0d 100644 --- a/drivers/staging/hikey9xx/Kconfig +++ b/drivers/staging/hikey9xx/Kconfig @@ -1,16 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -# to be placed at drivers/spmi -config SPMI_HISI3670 - tristate "Hisilicon 3670 SPMI Controller" - select IRQ_DOMAIN_HIERARCHY - depends on HAS_IOMEM - depends on SPMI - help - If you say yes to this option, support will be included for the - built-in SPMI PMIC Arbiter interface on Hisilicon 3670 - processors. - # to be placed at drivers/mfd config MFD_HI6421_SPMI tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC" diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile index 9371dcc3d35b..347880fd378f 100644 --- a/drivers/staging/hikey9xx/Makefile +++ b/drivers/staging/hikey9xx/Makefile @@ -1,5 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c deleted file mode 100644 index f831c43f4783..000000000000 --- a/drivers/staging/hikey9xx/hisi-spmi-controller.c +++ /dev/null @@ -1,358 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/spmi.h> - -/* - * SPMI register addr - */ -#define SPMI_CHANNEL_OFFSET 0x0300 -#define SPMI_SLAVE_OFFSET 0x20 - -#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100 - -#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104 -#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108 -#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c -#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110 - -#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200 - -#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204 -#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208 -#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c -#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210 - -#define SPMI_PER_DATAREG_BYTE 4 -/* - * SPMI cmd register - */ -#define SPMI_APB_SPMI_CMD_EN BIT(31) -#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24 -#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20 -#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16 -#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0 - -/* Command Opcodes */ - -enum spmi_controller_cmd_op_code { - SPMI_CMD_REG_ZERO_WRITE = 0, - SPMI_CMD_REG_WRITE = 1, - SPMI_CMD_REG_READ = 2, - SPMI_CMD_EXT_REG_WRITE = 3, - SPMI_CMD_EXT_REG_READ = 4, - SPMI_CMD_EXT_REG_WRITE_L = 5, - SPMI_CMD_EXT_REG_READ_L = 6, - SPMI_CMD_REG_RESET = 7, - SPMI_CMD_REG_SLEEP = 8, - SPMI_CMD_REG_SHUTDOWN = 9, - SPMI_CMD_REG_WAKEUP = 10, -}; - -/* - * SPMI status register - */ -#define SPMI_APB_TRANS_DONE BIT(0) -#define SPMI_APB_TRANS_FAIL BIT(2) - -/* Command register fields */ -#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16 - -/* Maximum number of support PMIC peripherals */ -#define SPMI_CONTROLLER_TIMEOUT_US 1000 -#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16 - -struct spmi_controller_dev { - struct spmi_controller *controller; - struct device *dev; - void __iomem *base; - spinlock_t lock; - u32 channel; -}; - -static int spmi_controller_wait_for_done(struct device *dev, - struct spmi_controller_dev *ctrl_dev, - void __iomem *base, u8 sid, u16 addr) -{ - u32 timeout = SPMI_CONTROLLER_TIMEOUT_US; - u32 status, offset; - - offset = SPMI_APB_SPMI_STATUS_BASE_ADDR; - offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid; - - do { - status = readl(base + offset); - - if (status & SPMI_APB_TRANS_DONE) { - if (status & SPMI_APB_TRANS_FAIL) { - dev_err(dev, "%s: transaction failed (0x%x)\n", - __func__, status); - return -EIO; - } - dev_dbg(dev, "%s: status 0x%x\n", __func__, status); - return 0; - } - udelay(1); - } while (timeout--); - - dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status); - return -ETIMEDOUT; -} - -static int spmi_read_cmd(struct spmi_controller *ctrl, - u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc) -{ - struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); - u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; - unsigned long flags; - u8 *buf = __buf; - u32 cmd, data; - int rc; - u8 op_code, i; - - if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { - dev_err(&ctrl->dev, - "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", - SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); - return -EINVAL; - } - - switch (opc) { - case SPMI_CMD_READ: - op_code = SPMI_CMD_REG_READ; - break; - case SPMI_CMD_EXT_READ: - op_code = SPMI_CMD_EXT_REG_READ; - break; - case SPMI_CMD_EXT_READL: - op_code = SPMI_CMD_EXT_REG_READ_L; - break; - default: - dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc); - return -EINVAL; - } - - cmd = SPMI_APB_SPMI_CMD_EN | - (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | - ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | - ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */ - ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */ - - spin_lock_irqsave(&spmi_controller->lock, flags); - - writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); - - rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, - spmi_controller->base, slave_id, slave_addr); - if (rc) - goto done; - - for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { - data = readl(spmi_controller->base + chnl_ofst + - SPMI_SLAVE_OFFSET * slave_id + - SPMI_APB_SPMI_RDATA0_BASE_ADDR + - i * SPMI_PER_DATAREG_BYTE); - data = be32_to_cpu((__be32)data); - if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { - memcpy(buf, &data, sizeof(data)); - buf += sizeof(data); - } else { - memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE); - buf += (bc % SPMI_PER_DATAREG_BYTE); - } - } - -done: - spin_unlock_irqrestore(&spmi_controller->lock, flags); - if (rc) - dev_err(&ctrl->dev, - "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", - opc, slave_id, slave_addr, bc + 1); - else - dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n", - __func__, slave_id, slave_addr, (int)bc, __buf); - - return rc; -} - -static int spmi_write_cmd(struct spmi_controller *ctrl, - u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc) -{ - struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); - u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; - const u8 *buf = __buf; - unsigned long flags; - u32 cmd, data; - int rc; - u8 op_code, i; - - if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { - dev_err(&ctrl->dev, - "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", - SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); - return -EINVAL; - } - - switch (opc) { - case SPMI_CMD_WRITE: - op_code = SPMI_CMD_REG_WRITE; - break; - case SPMI_CMD_EXT_WRITE: - op_code = SPMI_CMD_EXT_REG_WRITE; - break; - case SPMI_CMD_EXT_WRITEL: - op_code = SPMI_CMD_EXT_REG_WRITE_L; - break; - default: - dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc); - return -EINVAL; - } - - cmd = SPMI_APB_SPMI_CMD_EN | - (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | - ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | - ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | - ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); - - /* Write data to FIFOs */ - spin_lock_irqsave(&spmi_controller->lock, flags); - - for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { - data = 0; - if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { - memcpy(&data, buf, sizeof(data)); - buf += sizeof(data); - } else { - memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE); - buf += (bc % SPMI_PER_DATAREG_BYTE); - } - - writel((u32)cpu_to_be32(data), - spmi_controller->base + chnl_ofst + - SPMI_APB_SPMI_WDATA0_BASE_ADDR + - SPMI_PER_DATAREG_BYTE * i); - } - - /* Start the transaction */ - writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); - - rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, - spmi_controller->base, slave_id, - slave_addr); - spin_unlock_irqrestore(&spmi_controller->lock, flags); - - if (rc) - dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", - opc, slave_id, slave_addr, bc); - else - dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n", - __func__, slave_id, slave_addr, (int)bc, __buf); - - return rc; -} - -static int spmi_controller_probe(struct platform_device *pdev) -{ - struct spmi_controller_dev *spmi_controller; - struct spmi_controller *ctrl; - struct resource *iores; - int ret; - - ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller)); - if (!ctrl) { - dev_err(&pdev->dev, "can not allocate spmi_controller data\n"); - return -ENOMEM; - } - spmi_controller = spmi_controller_get_drvdata(ctrl); - spmi_controller->controller = ctrl; - - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iores) { - dev_err(&pdev->dev, "can not get resource!\n"); - return -EINVAL; - } - - spmi_controller->base = devm_ioremap(&pdev->dev, iores->start, - resource_size(iores)); - if (!spmi_controller->base) { - dev_err(&pdev->dev, "can not remap base addr!\n"); - return -EADDRNOTAVAIL; - } - - ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel", - &spmi_controller->channel); - if (ret) { - dev_err(&pdev->dev, "can not get channel\n"); - return -ENODEV; - } - - platform_set_drvdata(pdev, spmi_controller); - dev_set_drvdata(&ctrl->dev, spmi_controller); - - spin_lock_init(&spmi_controller->lock); - - ctrl->nr = spmi_controller->channel; - ctrl->dev.parent = pdev->dev.parent; - ctrl->dev.of_node = of_node_get(pdev->dev.of_node); - - /* Callbacks */ - ctrl->read_cmd = spmi_read_cmd; - ctrl->write_cmd = spmi_write_cmd; - - ret = spmi_controller_add(ctrl); - if (ret) - dev_err(&pdev->dev, "spmi_add_controller failed with error %d!\n", ret); - - return ret; -} - -static int spmi_del_controller(struct platform_device *pdev) -{ - struct spmi_controller *ctrl = platform_get_drvdata(pdev); - - spmi_controller_remove(ctrl); - kfree(ctrl); - return 0; -} - -static const struct of_device_id spmi_controller_match_table[] = { - { - .compatible = "hisilicon,kirin970-spmi-controller", - }, - {} -}; -MODULE_DEVICE_TABLE(of, spmi_controller_match_table); - -static struct platform_driver spmi_controller_driver = { - .probe = spmi_controller_probe, - .remove = spmi_del_controller, - .driver = { - .name = "hisi_spmi_controller", - .of_match_table = spmi_controller_match_table, - }, -}; - -static int __init spmi_controller_init(void) -{ - return platform_driver_register(&spmi_controller_driver); -} -postcore_initcall(spmi_controller_init); - -static void __exit spmi_controller_exit(void) -{ - platform_driver_unregister(&spmi_controller_driver); -} -module_exit(spmi_controller_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_VERSION("1.0"); -MODULE_ALIAS("platform:spmi_controller"); diff --git a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml deleted file mode 100644 index f2a56fa4e78e..000000000000 --- a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml +++ /dev/null @@ -1,62 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: HiSilicon SPMI controller - -maintainers: - - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> - -description: | - The HiSilicon SPMI BUS controller is found on some Kirin-based designs. - It is a MIPI System Power Management (SPMI) controller. - - The PMIC part is provided by - drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. - -properties: - $nodename: - pattern: "spmi@[0-9a-f]" - - compatible: - const: hisilicon,kirin970-spmi-controller - - reg: - maxItems: 1 - - spmi-channel: - description: | - number of the Kirin 970 SPMI channel where the SPMI devices are connected. - -required: - - compatible - - reg - - spmi-channel - -patternProperties: - "^pmic@[0-9a-f]$": - description: | - PMIC properties, which are specific to the used SPMI PMIC device(s). - When used in combination with HiSilicon 6421v600, the properties - are documented at - drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. - -examples: - - | - bus { - #address-cells = <2>; - #size-cells = <2>; - - spmi: spmi@fff24000 { - compatible = "hisilicon,kirin970-spmi-controller"; - status = "ok"; - reg = <0x0 0xfff24000 0x0 0x1000>; - spmi-channel = <2>; - - pmic@0 { - /* pmic properties */ - }; - }; - }; -- 2.28.0
