On Wed, Oct 21, 2020 at 07:18:19PM +0200, Loic Poulain wrote:
> This is a generic MHI-over-PCI controller driver for MHI only devices
> such as QCOM modems. For now it supports registering of Qualcomm SDX55
> based PCIe modules. The MHI channels have been extracted from mhi
> downstream driver.
>
> This driver is for MHI-only devices which have all functionalities
> exposed through MHI channels and accessed by the corresponding MHI
> device drivers (no out-of-band communication).
>
> Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
> Reviewed-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
Applied to mhi-next after fixing up the Makefile rule!
Thanks,
Mani
>
> ---
> v2: - remove useless delay.h include
> - remove over-logging on error
> - remove controller subdir
> - rename to mhi_pci_modem.c
> - Fix mhi_pci_probe exit path on error
> - expand module description
> - drop module version
> v3: - Rename to mhi_pci_generic
> - Add hardware accelerated IP channel (IPA)
> - Added fw/edl names for sdx55m
> v4: - Configurable dma width access
> - Configurable PCI BAR number (default is 0)
> v5: - use mhi_alloc_controller helper
> - Various naming refactoring (macros, mhi_cntrl)
> - Kconfig summary rework
> - kdoc for structures
> - rename driver file to pci_generic.c
> - dev_info to dev_dbg
> - warn message: shared irq
>
> drivers/bus/mhi/Kconfig | 9 ++
> drivers/bus/mhi/Makefile | 4 +
> drivers/bus/mhi/pci_generic.c | 345 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 358 insertions(+)
> create mode 100644 drivers/bus/mhi/pci_generic.c
>
> diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig
> index e841c10..da5cd0c 100644
> --- a/drivers/bus/mhi/Kconfig
> +++ b/drivers/bus/mhi/Kconfig
> @@ -20,3 +20,12 @@ config MHI_BUS_DEBUG
> Enable debugfs support for use with the MHI transport. Allows
> reading and/or modifying some values within the MHI controller
> for debug and test purposes.
> +
> +config MHI_BUS_PCI_GENERIC
> + tristate "MHI PCI controller driver"
> + depends on MHI_BUS
> + depends on PCI
> + help
> + This driver provides MHI PCI controller driver for devices such as
> + Qualcomm SDX55 based PCIe modems.
> +
> diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile
> index 19e6443..059495f 100644
> --- a/drivers/bus/mhi/Makefile
> +++ b/drivers/bus/mhi/Makefile
> @@ -1,2 +1,6 @@
> # core layer
> obj-y += core/
> +
> +obj-$(CONFIG_MHI_BUS_PCI_GENERIC) := mhi_pci_generic.o
> +mhi_pci_generic-y := pci_generic.o
> +
> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
> new file mode 100644
> index 0000000..e3df838
> --- /dev/null
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * MHI PCI driver - MHI over PCI controller driver
> + *
> + * This module is a generic driver for registering MHI-over-PCI devices,
> + * such as PCIe QCOM modems.
> + *
> + * Copyright (C) 2020 Linaro Ltd <loic.poulain@xxxxxxxxxx>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/mhi.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +
> +#define MHI_PCI_DEFAULT_BAR_NUM 0
> +
> +/**
> + * struct mhi_pci_dev_info - MHI PCI device specific information
> + * @config: MHI controller configuration
> + * @name: name of the PCI module
> + * @fw: firmware path (if any)
> + * @edl: emergency download mode firmware path (if any)
> + * @bar_num: PCI base address register to use for MHI MMIO register space
> + * @dma_data_width: DMA transfer word size (32 or 64 bits)
> + */
> +struct mhi_pci_dev_info {
> + const struct mhi_controller_config *config;
> + const char *name;
> + const char *fw;
> + const char *edl;
> + unsigned int bar_num;
> + unsigned int dma_data_width;
> +};
> +
> +#define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> + { \
> + .num = ch_num, \
> + .name = ch_name, \
> + .num_elements = el_count, \
> + .event_ring = ev_ring, \
> + .dir = DMA_TO_DEVICE, \
> + .ee_mask = BIT(MHI_EE_AMSS), \
> + .pollcfg = 0, \
> + .doorbell = MHI_DB_BRST_DISABLE, \
> + .lpm_notify = false, \
> + .offload_channel = false, \
> + .doorbell_mode_switch = false, \
> + } \
> +
> +#define MHI_CHANNEL_CONFIG_DL(ch_num, ch_name, el_count, ev_ring) \
> + { \
> + .num = ch_num, \
> + .name = ch_name, \
> + .num_elements = el_count, \
> + .event_ring = ev_ring, \
> + .dir = DMA_FROM_DEVICE, \
> + .ee_mask = BIT(MHI_EE_AMSS), \
> + .pollcfg = 0, \
> + .doorbell = MHI_DB_BRST_DISABLE, \
> + .lpm_notify = false, \
> + .offload_channel = false, \
> + .doorbell_mode_switch = false, \
> + }
> +
> +#define MHI_EVENT_CONFIG_CTRL(ev_ring) \
> + { \
> + .num_elements = 64, \
> + .irq_moderation_ms = 0, \
> + .irq = (ev_ring) + 1, \
> + .priority = 1, \
> + .mode = MHI_DB_BRST_DISABLE, \
> + .data_type = MHI_ER_CTRL, \
> + .hardware_event = false, \
> + .client_managed = false, \
> + .offload_channel = false, \
> + }
> +
> +#define MHI_EVENT_CONFIG_DATA(ev_ring) \
> + { \
> + .num_elements = 128, \
> + .irq_moderation_ms = 5, \
> + .irq = (ev_ring) + 1, \
> + .priority = 1, \
> + .mode = MHI_DB_BRST_DISABLE, \
> + .data_type = MHI_ER_DATA, \
> + .hardware_event = false, \
> + .client_managed = false, \
> + .offload_channel = false, \
> + }
> +
> +#define MHI_EVENT_CONFIG_HW_DATA(ev_ring, ch_num) \
> + { \
> + .num_elements = 128, \
> + .irq_moderation_ms = 5, \
> + .irq = (ev_ring) + 1, \
> + .priority = 1, \
> + .mode = MHI_DB_BRST_DISABLE, \
> + .data_type = MHI_ER_DATA, \
> + .hardware_event = true, \
> + .client_managed = false, \
> + .offload_channel = false, \
> + .channel = ch_num, \
> + }
> +
> +static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
> + MHI_CHANNEL_CONFIG_UL(12, "MBIM", 4, 0),
> + MHI_CHANNEL_CONFIG_DL(13, "MBIM", 4, 0),
> + MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
> + MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
> + MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
> + MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0),
> + MHI_CHANNEL_CONFIG_UL(100, "IP_HW0", 128, 1),
> + MHI_CHANNEL_CONFIG_DL(101, "IP_HW0", 128, 2),
> +};
> +
> +static const struct mhi_event_config modem_qcom_v1_mhi_events[] = {
> + /* first ring is control+data ring */
> + MHI_EVENT_CONFIG_CTRL(0),
> + /* Hardware channels request dedicated hardware event rings */
> + MHI_EVENT_CONFIG_HW_DATA(1, 100),
> + MHI_EVENT_CONFIG_HW_DATA(2, 101)
> +};
> +
> +static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
> + .max_channels = 128,
> + .timeout_ms = 5000,
> + .num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels),
> + .ch_cfg = modem_qcom_v1_mhi_channels,
> + .num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events),
> + .event_cfg = modem_qcom_v1_mhi_events,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
> + .name = "qcom-sdx55m",
> + .fw = "qcom/sdx55m/sbl1.mbn",
> + .edl = "qcom/sdx55m/edl.mbn",
> + .config = &modem_qcom_v1_mhiv_config,
> + .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> + .dma_data_width = 32
> +};
> +
> +static const struct pci_device_id mhi_pci_id_table[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
> + .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
> + { }
> +};
> +MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
> +
> +static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl,
> + void __iomem *addr, u32 *out)
> +{
> + *out = readl(addr);
> + return 0;
> +}
> +
> +static void mhi_pci_write_reg(struct mhi_controller *mhi_cntrl,
> + void __iomem *addr, u32 val)
> +{
> + writel(val, addr);
> +}
> +
> +static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl,
> + enum mhi_callback cb)
> +{
> + /* Nothing to do for now */
> +}
> +
> +static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
> + unsigned int bar_num, u64 dma_mask)
> +{
> + struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
> + int err;
> +
> + err = pci_assign_resource(pdev, bar_num);
> + if (err)
> + return err;
> +
> + err = pcim_enable_device(pdev);
> + if (err) {
> + dev_err(&pdev->dev, "failed to enable pci device: %d\n", err);
> + return err;
> + }
> +
> + err = pcim_iomap_regions(pdev, 1 << bar_num, pci_name(pdev));
> + if (err) {
> + dev_err(&pdev->dev, "failed to map pci region: %d\n", err);
> + return err;
> + }
> + mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num];
> +
> + err = pci_set_dma_mask(pdev, dma_mask);
> + if (err) {
> + dev_err(&pdev->dev, "Cannot set proper DMA mask\n");
> + return err;
> + }
> +
> + err = pci_set_consistent_dma_mask(pdev, dma_mask);
> + if (err) {
> + dev_err(&pdev->dev, "set consistent dma mask failed\n");
> + return err;
> + }
> +
> + pci_set_master(pdev);
> +
> + return 0;
> +}
> +
> +static int mhi_pci_get_irqs(struct mhi_controller *mhi_cntrl,
> + const struct mhi_controller_config *mhi_cntrl_config)
> +{
> + struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
> + int nr_vectors, i;
> + int *irq;
> +
> + /*
> + * Alloc one MSI vector for BHI + one vector per event ring, ideally...
> + * No explicit pci_free_irq_vectors required, done by pcim_release.
> + */
> + mhi_cntrl->nr_irqs = 1 + mhi_cntrl_config->num_events;
> +
> + nr_vectors = pci_alloc_irq_vectors(pdev, 1, mhi_cntrl->nr_irqs, PCI_IRQ_MSI);
> + if (nr_vectors < 0) {
> + dev_err(&pdev->dev, "Error allocating MSI vectors %d\n",
> + nr_vectors);
> + return nr_vectors;
> + }
> +
> + if (nr_vectors < mhi_cntrl->nr_irqs) {
> + dev_warn(&pdev->dev, "Not enough MSI vectors (%d/%d), use shared MSI\n",
> + nr_vectors, mhi_cntrl_config->num_events);
> + }
> +
> + irq = devm_kcalloc(&pdev->dev, mhi_cntrl->nr_irqs, sizeof(int), GFP_KERNEL);
> + if (!irq)
> + return -ENOMEM;
> +
> + for (i = 0; i < mhi_cntrl->nr_irqs; i++) {
> + int vector = i >= nr_vectors ? (nr_vectors - 1) : i;
> +
> + irq[i] = pci_irq_vector(pdev, vector);
> + }
> +
> + mhi_cntrl->irq = irq;
> +
> + return 0;
> +}
> +
> +static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl)
> +{
> + /* no PM for now */
> + return 0;
> +}
> +
> +static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
> +{
> + /* no PM for now */
> +}
> +
> +static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> + const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
> + const struct mhi_controller_config *mhi_cntrl_config;
> + struct mhi_controller *mhi_cntrl;
> + int err;
> +
> + dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name);
> +
> + mhi_cntrl = mhi_alloc_controller();
> + if (!mhi_cntrl)
> + return -ENOMEM;
> +
> + mhi_cntrl_config = info->config;
> + mhi_cntrl->cntrl_dev = &pdev->dev;
> + mhi_cntrl->iova_start = 0;
> + mhi_cntrl->iova_stop = DMA_BIT_MASK(info->dma_data_width);
> + mhi_cntrl->fw_image = info->fw;
> + mhi_cntrl->edl_image = info->edl;
> +
> + mhi_cntrl->read_reg = mhi_pci_read_reg;
> + mhi_cntrl->write_reg = mhi_pci_write_reg;
> + mhi_cntrl->status_cb = mhi_pci_status_cb;
> + mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> + mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> +
> + err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
> + if (err)
> + goto err_release;
> +
> + err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config);
> + if (err)
> + goto err_release;
> +
> + pci_set_drvdata(pdev, mhi_cntrl);
> +
> + err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
> + if (err)
> + goto err_release;
> +
> + /* MHI bus does not power up the controller by default */
> + err = mhi_prepare_for_power_up(mhi_cntrl);
> + if (err) {
> + dev_err(&pdev->dev, "failed to prepare MHI controller\n");
> + goto err_unregister;
> + }
> +
> + err = mhi_sync_power_up(mhi_cntrl);
> + if (err) {
> + dev_err(&pdev->dev, "failed to power up MHI controller\n");
> + goto err_unprepare;
> + }
> +
> + return 0;
> +
> +err_unprepare:
> + mhi_unprepare_after_power_down(mhi_cntrl);
> +err_unregister:
> + mhi_unregister_controller(mhi_cntrl);
> +err_release:
> + mhi_free_controller(mhi_cntrl);
> +
> + return err;
> +}
> +
> +static void mhi_pci_remove(struct pci_dev *pdev)
> +{
> + struct mhi_controller *mhi_cntrl = pci_get_drvdata(pdev);
> +
> + mhi_power_down(mhi_cntrl, true);
> + mhi_unprepare_after_power_down(mhi_cntrl);
> + mhi_unregister_controller(mhi_cntrl);
> + mhi_free_controller(mhi_cntrl);
> +}
> +
> +static struct pci_driver mhi_pci_driver = {
> + .name = "mhi-pci-generic",
> + .id_table = mhi_pci_id_table,
> + .probe = mhi_pci_probe,
> + .remove = mhi_pci_remove
> +};
> +module_pci_driver(mhi_pci_driver);
> +
> +MODULE_AUTHOR("Loic Poulain <loic.poulain@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
>
