Re: [PATCH v4 0/2] Add LT9611UXC DSI to HDMI bridge support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry

On Mon, Nov 02, 2020 at 04:14:33AM +0300, Dmitry Baryshkov wrote:
> Hi,
> 
> This series adds support for Lontium LT9611UXC bridge chip which takes
> MIPI DSI as input and provides HDMI signal as output.
> 
> The chip can be found in Qualcomm RB5 platform [1], [2].
> 
> [1] https://www.qualcomm.com/products/qualcomm-robotics-rb5-platform
> [2] https://www.thundercomm.com/app_en/product/1590131656070623
> 
> Changes since v3:
>  - Support for firmware upgrades
>  - Simplified modes table to include only used fields (w, h, refresh)
>  - Added more entries to display modes table, as more modes are
>    supported by the firmware
>  - Wait for EDID to be available from the hardware before reading it
>  - Do not store EDID in the interim buffer, lowering the size of
>    per-device struct

Thanks, driver is now applied to drm-misc-next.

	Sam



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux