Hi, On Fri, Nov 6, 2020 at 2:01 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote: > > Add configs for lazor rev2 and rev3. There are no relevant deltas > between rev1 and rev2, so just add the rev2 compatible string to the > rev1 config. > > One important delta in rev3 is a switch of the power supply for the > onboard USB hub from 'pp3300_l7c' to 'pp3300_a' + a load switch. The > actual regulator switch is done by the patch 'arm64: dts: qcom: > sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub', > since it affects the entire trogdor platform. Here we only add the > .dts files for lazor rev3 and replace the generic compatible entries > in the rev1 .dts files. > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> > --- > > Changes in v3: > - rev3 switched the regulator, not rev2 > - also handle rev2 in rev1 files > - fixed include in -r3-kb.dts > > Changes in v2: > - patch added to the series > > arch/arm64/boot/dts/qcom/Makefile | 3 +++ > .../dts/qcom/sc7180-trogdor-lazor-r1-kb.dts | 4 ++-- > .../dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 4 ++-- > .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 4 ++-- > .../dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 17 +++++++++++++++++ > .../dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 18 ++++++++++++++++++ > .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 15 +++++++++++++++ > 7 files changed, 59 insertions(+), 6 deletions(-) > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
