Add the interconnects DT property to describe the ports for GENI QUPs
on the sdm845 platform.
Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 160 +++++++++++++++++++++++++++
1 file changed, 160 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index aca7e9c954e0..14e74ba889c3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1123,6 +1123,8 @@ qupv3_id_0: geniqup@8c0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
@@ -1137,6 +1139,10 @@ i2c0: i2c@880000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1150,6 +1156,9 @@ spi0: spi@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1163,6 +1172,9 @@ uart0: serial@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1178,6 +1190,10 @@ i2c1: i2c@884000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1191,6 +1207,9 @@ spi1: spi@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1204,6 +1223,9 @@ uart1: serial@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1219,6 +1241,10 @@ i2c2: i2c@888000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1232,6 +1258,9 @@ spi2: spi@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1245,6 +1274,9 @@ uart2: serial@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1260,6 +1292,10 @@ i2c3: i2c@88c000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1273,6 +1309,9 @@ spi3: spi@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1286,6 +1325,9 @@ uart3: serial@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1301,6 +1343,10 @@ i2c4: i2c@890000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1314,6 +1360,9 @@ spi4: spi@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1327,6 +1376,9 @@ uart4: serial@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1342,6 +1394,10 @@ i2c5: i2c@894000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1355,6 +1411,9 @@ spi5: spi@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1368,6 +1427,9 @@ uart5: serial@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1383,6 +1445,10 @@ i2c6: i2c@898000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1396,6 +1462,9 @@ spi6: spi@898000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1409,6 +1478,9 @@ uart6: serial@898000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1437,6 +1509,9 @@ spi7: spi@89c000 {
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1450,6 +1525,9 @@ uart7: serial@89c000 {
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
@@ -1463,6 +1541,8 @@ qupv3_id_1: geniqup@ac0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core";
status = "disabled";
i2c8: i2c@a80000 {
@@ -1477,6 +1557,10 @@ i2c8: i2c@a80000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1490,6 +1574,9 @@ spi8: spi@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1503,6 +1590,9 @@ uart8: serial@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1518,6 +1608,10 @@ i2c9: i2c@a84000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1531,6 +1625,9 @@ spi9: spi@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1544,6 +1641,9 @@ uart9: serial@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1559,6 +1659,10 @@ i2c10: i2c@a88000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1572,6 +1676,9 @@ spi10: spi@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1585,6 +1692,9 @@ uart10: serial@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1600,6 +1710,10 @@ i2c11: i2c@a8c000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1613,6 +1727,9 @@ spi11: spi@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1626,6 +1743,9 @@ uart11: serial@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1641,6 +1761,10 @@ i2c12: i2c@a90000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1654,6 +1778,9 @@ spi12: spi@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1667,6 +1794,9 @@ uart12: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1682,6 +1812,10 @@ i2c13: i2c@a94000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1695,6 +1829,9 @@ spi13: spi@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1708,6 +1845,9 @@ uart13: serial@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1723,6 +1863,10 @@ i2c14: i2c@a98000 {
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -1736,6 +1880,9 @@ spi14: spi@a98000 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1749,6 +1896,9 @@ uart14: serial@a98000 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1765,6 +1915,10 @@ i2c15: i2c@a9c000 {
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
};
spi15: spi@a9c000 {
@@ -1777,6 +1931,9 @@ spi15: spi@a9c000 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -1790,6 +1947,9 @@ uart15: serial@a9c000 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
