Re: [PATCH v4] watchdog: qcom_wdt: set WDOG_HW_RUNNING bit when appropriate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/1/20 7:58 PM, Kathiravan T wrote:
> 
> On 10/31/2020 7:38 PM, Guenter Roeck wrote:
>> On 10/31/20 5:11 AM, Robert Marko wrote:
>>> If the watchdog hardware is enabled/running during boot, e.g.
>>> due to a boot loader configuring it, we must tell the
>>> watchdog framework about this fact so that it can ping the
>>> watchdog until userspace opens the device and takes over
>>> control.
>>>
>>> Do so using the WDOG_HW_RUNNING flag that exists for exactly
>>> that use-case.
>>>
>>> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
>> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> 
> Thanks for addressing the comments and now the patch looks good to me. One more suggestion, can we make the initcall level of the driver to subsys_initcall_sync so that the driver gets registered immediately after the watchdog_core is registered and watchdog_core starts pinging the WDT?
> 

That would mean to replace module_platform_driver(), which would be a whole
different discussion, is not widely needed, and would potentially interfere
with the subsys_initcall_sync() in the watchdog core. This will require
specific evidence that a problem is seen in the field, and that it is truly
needed. Plus, it would have to be a different patch (which you could submit
yourself, with evidence). Let's stick with one logical change per patch,
please.

Guenter



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux