On Wed, Oct 28, 2020 at 01:12:28PM +0530, Manivannan Sadhasivam wrote: > Hello, > > This series adds Global Clock Controller (GCC) and RPMh clock support > for SDX55 SoC from Qualcomm with relevant DT bindings. > > This series has been tested on SDX55 MTP board. The dts patches for this > SoC/board will be posted later. > > Thanks, > Mani > > Manivannan Sadhasivam (1): > clk: qcom: Add support for SDX55 RPMh clocks > > Naveen Yadav (1): > clk: qcom: Add SDX55 GCC support Bjorn, I've inherited the gcc driver from downstream and did some modification. But I'm not sure if I can take the authorship of this patch hence kept it to the downstream author. In my point of view, the downstream author wrote the driver so I should keep the copyright and even list them as MODULE_AUTHOR. But I don't think I should give the patch authorship to them because I haven't received the patch anyhow. I usually keep the authorship if I take the patch from a source like LKML and repost it. But in this case, I authored the patch using someone's code! What is your view on this? Thanks, Mani > > Vinod Koul (2): > dt-bindings: clock: Add SDX55 GCC clock bindings > dt-bindings: clock: Introduce RPMHCC bindings for SDX55 > > .../bindings/clock/qcom,gcc-sdx55.yaml | 71 + > .../bindings/clock/qcom,rpmhcc.yaml | 1 + > drivers/clk/qcom/Kconfig | 8 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/clk-rpmh.c | 20 + > drivers/clk/qcom/gcc-sdx55.c | 1667 +++++++++++++++++ > include/dt-bindings/clock/qcom,gcc-sdx55.h | 112 ++ > include/dt-bindings/clock/qcom,rpmh.h | 1 + > 8 files changed, 1881 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml > create mode 100644 drivers/clk/qcom/gcc-sdx55.c > create mode 100644 include/dt-bindings/clock/qcom,gcc-sdx55.h > > -- > 2.17.1 >
