Add device tree binding Documentation details for Qualcomm SDX55 pinctrl driver. Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml | 144 ++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml new file mode 100644 index 000000000000..2dd045a2fb03 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDX55 TLMM block + +maintainers: + - Vinod Koul <vkoul@xxxxxxxxxx> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + SDX55 platform. + +properties: + compatible: + const: qcom,sdx55-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + + wakeup-parent: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '^.*$': + if: + type: object + then: + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, + blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3, + blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1, + emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3, + gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update, + mgpi_clk, m_voc, native_char, native_char0, native_char1, + native_char2, native_char3, native_tsens, native_tsense, + nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref, + pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, + qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4, + qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, + qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, + qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2, + qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7, + qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12, + qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17, + qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22, + qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27, + qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en, + qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss, + spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data, + uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, + uim2_reset, usb2phy_ac, vsense_trigger ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@1f00000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + }; + +... -- 2.26.2
