This is resend of v3, due to dt_bindings check failure as rc1 was not out when previous v3 was sent! This patchset adds support for GFM Muxes found in LPASS (Low Power Audio SubSystem) IP in Audio Clock Controller and Always ON clock controller. Clocks derived from these muxes are consumed by LPASS Digital Codec. Currently the driver for Audio and Always ON clock controller only supports GFM Muxes, however it should be easy to add more clock support when required Changes since v2: - updated Kconfig text and help as suggested by Stephen - removed unnecessary header file include - use fw_name instead of name for parents - use devm_platform_ioremap_resource verified dt_binding_check to pass on rc1, Srinivas Kandagatla (4): dt-bindings: clock: Add support for LPASS Audio Clock Controller dt-bindings: clock: Add support for LPASS Always ON Controller clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks .../bindings/clock/qcom,aoncc-sm8250.yaml | 58 ++++ .../bindings/clock/qcom,audiocc-sm8250.yaml | 58 ++++ drivers/clk/qcom/Kconfig | 6 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/lpass-gfm-sm8250.c | 320 ++++++++++++++++++ .../clock/qcom,sm8250-lpass-aoncc.h | 11 + .../clock/qcom,sm8250-lpass-audiocc.h | 13 + 7 files changed, 467 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml create mode 100644 drivers/clk/qcom/lpass-gfm-sm8250.c create mode 100644 include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h create mode 100644 include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h -- 2.21.0
