[RESEND PATCH v2 1/2] bindings: pm8941-misc: Convert to YAML and add support for VBUS detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Anirudh Ghayal <aghayal@xxxxxxxxxxxxxx>

Convert bindings to YAML. Also add compatible string that adds support
for reporting the VBUS status that can be detected via a dedicated PMIC
pin.

Signed-off-by: Anirudh Ghayal <aghayal@xxxxxxxxxxxxxx>
Signed-off-by: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
---
 .../bindings/extcon/qcom,pm8941-misc.txt           | 41 ----------------
 .../bindings/extcon/qcom,pm8941-misc.yaml          | 56 ++++++++++++++++++++++
 2 files changed, 56 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
 create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml

diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
deleted file mode 100644
index 35383adb..0000000
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Qualcomm's PM8941 USB ID Extcon device
-
-Some Qualcomm PMICs have a "misc" module that can be used to detect when
-the USB ID pin has been pulled low or high.
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,pm8941-misc";
-
-- reg:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain the offset to the misc address space
-
-- interrupts:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the usb id interrupt
-
-- interrupt-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain the string "usb_id" for the usb id interrupt
-
-Example:
-
-	pmic {
-		usb_id: misc@900 {
-			compatible = "qcom,pm8941-misc";
-			reg = <0x900>;
-			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "usb_id";
-		};
-	}
-
-	usb-controller {
-		extcon = <&usb_id>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
new file mode 100644
index 0000000..9fbdb5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's PM8941 USB ID Extcon device
+
+maintainers:
+  - Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
+
+description: |
+  Some Qualcomm PMICs have a "misc" module that can be used to detect when
+  the USB ID pin has been pulled low or high.
+
+properties:
+  compatible:
+    oneOf:
+      - const:
+          - qcom,pm8941-misc
+          - qcom,pmd-vbus-det
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    anyOf:
+      - const:
+          - usb_id
+          - usb_vbus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+            usb_id: misc@900 {
+                    compatible = "qcom,pm8941-misc";
+                    reg = <0x900>;
+                    interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+                    interrupt-names = "usb_id";
+            };
+    }
+
+    usb-controller {
+           extcon = <&usb_id>;
+    };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux