Looks good to me. Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx> On Sun, 18 Oct 2020 at 14:53, <kholk11@xxxxxxxxx> wrote: > > From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx> > > Add bindings for qcom,sdm660-camss in order to support the camera > subsystem on SDM630/660 and SDA variants. > > Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx> > --- > Documentation/devicetree/bindings/media/qcom,camss.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt > index 09eb6ed99114..498234629e21 100644 > --- a/Documentation/devicetree/bindings/media/qcom,camss.txt > +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt > @@ -8,6 +8,7 @@ Qualcomm Camera Subsystem > Definition: Should contain one of: > - "qcom,msm8916-camss" > - "qcom,msm8996-camss" > + - "qcom,sdm660-camss" > - reg: > Usage: required > Value type: <prop-encoded-array> > @@ -64,30 +65,36 @@ Qualcomm Camera Subsystem > Value type: <stringlist> > Definition: Should contain the following entries: > - "top_ahb" > + - "throttle_axi" (660 only) > - "ispif_ahb" > - "csiphy0_timer" > - "csiphy1_timer" > - "csiphy2_timer" (8996 only) > + - "csiphy_ahb2crif" (660 only) > - "csi0_ahb" > - "csi0" > - "csi0_phy" > - "csi0_pix" > - "csi0_rdi" > + - "cphy_csid0" (660 only) > - "csi1_ahb" > - "csi1" > - "csi1_phy" > - "csi1_pix" > - "csi1_rdi" > + - "cphy_csid1" (660 only) > - "csi2_ahb" (8996 only) > - "csi2" (8996 only) > - "csi2_phy" (8996 only) > - "csi2_pix" (8996 only) > - "csi2_rdi" (8996 only) > + - "cphy_csid2" (660 only) > - "csi3_ahb" (8996 only) > - "csi3" (8996 only) > - "csi3_phy" (8996 only) > - "csi3_pix" (8996 only) > - "csi3_rdi" (8996 only) > + - "cphy_csid3" (660 only) > - "ahb" > - "vfe0" > - "csi_vfe0" > -- > 2.28.0 >
