Nice catch! This patch looks good to me.
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
On Sun, 18 Oct 2020 at 14:54, <kholk11@xxxxxxxxx> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
>
> Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
> for dual-camera or simply because a secondary camera is connected
> to it: in this case the reset will always happen on the VFE0 ctx
> of the ISPIF, which is .. useless.
>
> Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
> where to do the (or what to) reset based on the VFE line id.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> ---
> .../media/platform/qcom/camss/camss-ispif.c | 87 ++++++++++++-------
> .../media/platform/qcom/camss/camss-ispif.h | 2 +-
> 2 files changed, 57 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
> index db94cfd6c508..252db6b33dab 100644
> --- a/drivers/media/platform/qcom/camss/camss-ispif.c
> +++ b/drivers/media/platform/qcom/camss/camss-ispif.c
> @@ -26,6 +26,7 @@
> #define MSM_ISPIF_NAME "msm_ispif"
>
> #define ISPIF_RST_CMD_0 0x008
> +#define ISPIF_RST_CMD_1 0x00c
> #define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0)
> #define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1)
> #define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2)
> @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
> writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
>
> if ((value0 >> 27) & 0x1)
> - complete(&ispif->reset_complete);
> + complete(&ispif->reset_complete[0]);
> +
> + if ((value3 >> 27) & 0x1)
> + complete(&ispif->reset_complete[1]);
>
> if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
> writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
>
> if ((value0 >> 27) & 0x1)
> - complete(&ispif->reset_complete);
> + complete(&ispif->reset_complete[0]);
>
> if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> @@ -257,33 +261,17 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
> return IRQ_HANDLED;
> }
>
> -/*
> - * ispif_reset - Trigger reset on ISPIF module and wait to complete
> - * @ispif: ISPIF device
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int ispif_reset(struct ispif_device *ispif)
> +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
> {
> - unsigned long time;
> u32 val;
> - int ret;
> -
> - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> - if (ret < 0)
> - return ret;
>
> - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> - if (ret < 0)
> - return ret;
> -
> - ret = camss_enable_clocks(ispif->nclocks_for_reset,
> - ispif->clock_for_reset,
> - to_device(ispif));
> - if (ret < 0)
> - return ret;
> + if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
> + dev_err(to_device(ispif),
> + "Error: asked reset for invalid VFE%d\n", vfe_id);
> + return -ENOENT;
> + }
>
> - reinit_completion(&ispif->reset_complete);
> + reinit_completion(&ispif->reset_complete[vfe_id]);
>
> val = ISPIF_RST_CMD_0_STROBED_RST_EN |
> ISPIF_RST_CMD_0_MISC_LOGIC_RST |
> @@ -303,15 +291,51 @@ static int ispif_reset(struct ispif_device *ispif)
> ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
> ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
>
> - writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> + if (vfe_id == 1)
> + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
> + else
> + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
>
> - time = wait_for_completion_timeout(&ispif->reset_complete,
> + time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
> msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
> if (!time) {
> - dev_err(to_device(ispif), "ISPIF reset timeout\n");
> - ret = -EIO;
> + dev_err(to_device(ispif),
> + "ISPIF for VFE%d reset timeout\n", vfe_id);
> + return -EIO;
> }
>
> + return 0;
> +}
> +
> +/*
> + * ispif_reset - Trigger reset on ISPIF module and wait to complete
> + * @ispif: ISPIF device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
> +{
> + unsigned long time;
> + int ret;
> +
> + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> + if (ret < 0)
> + return ret;
> +
> + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> + if (ret < 0)
> + return ret;
> +
> + ret = camss_enable_clocks(ispif->nclocks_for_reset,
> + ispif->clock_for_reset,
> + to_device(ispif));
> + if (ret < 0)
> + return ret;
> +
> + ret = ispif_vfe_reset(ispif, vfe_id);
> + if (ret)
> + dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
> +
> camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
>
> camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
> @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
> goto exit;
> }
>
> - ret = ispif_reset(ispif);
> + ret = ispif_reset(ispif, line->vfe_id);
> if (ret < 0) {
> pm_runtime_put_sync(dev);
> camss_disable_clocks(ispif->nclocks, ispif->clock);
> @@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
>
> mutex_init(&ispif->config_lock);
>
> - init_completion(&ispif->reset_complete);
> + for (i = 0; i < MSM_ISPIF_VFE_NUM; i++)
> + init_completion(&ispif->reset_complete[i]);
>
> return 0;
> }
> diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
> index 1a5ba2425a42..4132174f7ea1 100644
> --- a/drivers/media/platform/qcom/camss/camss-ispif.h
> +++ b/drivers/media/platform/qcom/camss/camss-ispif.h
> @@ -56,7 +56,7 @@ struct ispif_device {
> int nclocks;
> struct camss_clock *clock_for_reset;
> int nclocks_for_reset;
> - struct completion reset_complete;
> + struct completion reset_complete[MSM_ISPIF_VFE_NUM];
> int power_count;
> struct mutex power_lock;
> struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
> --
> 2.28.0
>
