Re: [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Taniya Das (2020-10-13 10:11:48)
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index 26139ef..17e1fc0 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
>         .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
>  };
>  EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
> +
> +void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> +                       const struct alpha_pll_config *config)
> +{
> +       if (config->l)
> +               regmap_write(regmap, PLL_L_VAL(pll), config->l);

Maybe make a helper function for this too. That way we can't mix up the
if condition with the value in the write.

	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);

static void clk_alpha_pll_write_config(struct regmap *regmap,
				       unsigned int reg,
				       unsigned int val) {
	if (val)
		regmap_write(regmap, reg, val);
}

and how are we so lucky that zero isn't a value that we may need to
write?

> +
> +       if (config->alpha)
> +               regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> +
> +       if (config->user_ctl_val)
> +               regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
> +
> +       if (config->config_ctl_val)
> +               regmap_write(regmap, PLL_CONFIG_CTL(pll),
> +                                               config->config_ctl_val);
> +
> +       if (config->config_ctl_hi_val)
> +               regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
> +                                               config->config_ctl_hi_val);
> +
> +       if (config->test_ctl_val)
> +               regmap_write(regmap, PLL_TEST_CTL(pll),
> +                                               config->test_ctl_val);
> +
> +       if (config->test_ctl_hi_val)
> +               regmap_write(regmap,  PLL_TEST_CTL_U(pll),
> +                                               config->test_ctl_hi_val);
> +}
> +EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
> +
> +static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
> +                                                       unsigned long prate)
> +{
> +       struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +       u32 l, alpha_width = pll_alpha_width(pll);
> +       unsigned long rrate, max = rate + PLL_RATE_MARGIN;
> +       u64 a;
> +
> +       rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
> +
> +       /*
> +        * Due to limited number of bits for fractional rate programming, the
> +        * rounded up rate could be marginally higher than the requested rate.
> +        */
> +       if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
> +               pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
> +                      clk_hw_get_name(hw), rrate, rate, max);
> +               return -EINVAL;
> +       }

Can this be extracted into a helper function?

> +
> +       /* change L_VAL without having to go through the power on sequence */
> +       regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> +       regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> +
> +       if (clk_hw_is_enabled(hw))
> +               return wait_for_pll_enable_lock(pll);
> +
> +       return 0;
> +}
> +




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux