Hi Loic,
On 10/6/20 7:54 AM, Loic Poulain wrote:
This is a generic MHI-over-PCI controller driver for MHI only devices
such as QCOM modems. For now it supports registering of Qualcomm SDX55
based PCIe modules. The MHI channels have been extracted from mhi
downstream driver.
This driver is for MHI-only devices which have all functionnalities
exposed through MHI channels and accessed by the corresponding MHI
device drivers (no out-of-band communication).
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
v2: - remove useless delay.h include
- remove over-logging on error
- remove controller subdir
- rename to mhi_pci_modem.c
- Fix mhi_pci_probe exit path on error
- expand module description
- drop module version
v3: - Rename to mhi_pci_generic
- Add hardware accelerated IP channel (IPA)
- Added fw/edl names for sdx55m
drivers/bus/mhi/Kconfig | 9 ++
drivers/bus/mhi/Makefile | 3 +
drivers/bus/mhi/mhi_pci_generic.c | 332 ++++++++++++++++++++++++++++++++++++++
3 files changed, 344 insertions(+)
create mode 100644 drivers/bus/mhi/mhi_pci_generic.c
diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig
index e841c10..daa8528 100644
--- a/drivers/bus/mhi/Kconfig
+++ b/drivers/bus/mhi/Kconfig
@@ -20,3 +20,12 @@ config MHI_BUS_DEBUG
Enable debugfs support for use with the MHI transport. Allows
reading and/or modifying some values within the MHI controller
for debug and test purposes.
+
+config MHI_BUS_PCI_GENERIC
+ tristate "MHI PCI controller driver"
+ depends on MHI_BUS
+ depends on PCI
+ help
+ This driver provides Modem Host Interface (MHI) PCI controller driver
+ for devices such as Qualcomm SDX55 based PCIe modems.
+
diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile
index 19e6443..d1a4ef3 100644
--- a/drivers/bus/mhi/Makefile
+++ b/drivers/bus/mhi/Makefile
@@ -1,2 +1,5 @@
# core layer
obj-y += core/
+
+obj-$(CONFIG_MHI_BUS_PCI_GENERIC) := mhi_pci_generic.o
+
diff --git a/drivers/bus/mhi/mhi_pci_generic.c b/drivers/bus/mhi/mhi_pci_generic.c
new file mode 100644
index 0000000..03fcf76
--- /dev/null
+++ b/drivers/bus/mhi/mhi_pci_generic.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MHI PCI driver - MHI over PCI controller driver
+ *
+ * This module is a generic driver for registering MHI-over-PCI devices,
+ * such as PCIe QCOM modems.
+ *
+ * Copyright (C) 2020 Linaro Ltd <loic.poulain@xxxxxxxxxx>
+ */
+
+#include <linux/device.h>
+#include <linux/mhi.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#define MHI_PCI_BAR_NUM 0
+
+struct mhi_pci_dev_info {
+ const struct mhi_controller_config *config;
+ const char *name;
+ const char *fw;
+ const char *edl;
+};
+
+#define MHI_CHANNEL_CONFIG_TX(cnum, cname, elems, event) \MHI core driver used uplink and downlink naming for channels, does it
make sense to follow same naming instead of TX and RX?
+ { \
+ .num = cnum, \
+ .name = cname, \
+ .num_elements = elems, \
+ .event_ring = event, \
+ .dir = DMA_TO_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ } \
+
+#define MHI_CHANNEL_CONFIG_RX(cnum, cname, elems, event) \
+ { \
+ .num = cnum, \
+ .name = cname, \
+ .num_elements = elems, \
+ .event_ring = event, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ }
+
+#define MHI_EVENT_CONFIG_CTRL(enum) \
+ { \
+ .num_elements = 64, \
+ .irq_moderation_ms = 5, \
+ .irq = enum, \
+ .priority = 1, \
+ .mode = MHI_DB_BRST_DISABLE, \
+ .data_type = MHI_ER_CTRL, \
+ .hardware_event = false, \
+ .client_managed = false, \
+ .offload_channel = false, \
+ }
+
+#define MHI_EVENT_CONFIG_DATA(enum) \
+ { \
+ .num_elements = 64, \
+ .irq_moderation_ms = 5, \
+ .irq = enum, \
+ .priority = 1, \
+ .mode = MHI_DB_BRST_DISABLE, \
+ .data_type = MHI_ER_DATA, \
+ .hardware_event = false, \
+ .client_managed = false, \
+ .offload_channel = false, \
+ }
+
+#define MHI_EVENT_CONFIG_HW_DATA(enum, cnum) \
+ { \
+ .num_elements = 64, \
+ .irq_moderation_ms = 5, \
+ .irq = enum, \
+ .priority = 1, \
+ .mode = MHI_DB_BRST_ENABLE, \
+ .data_type = MHI_ER_DATA, \
+ .hardware_event = true, \
+ .client_managed = false, \
+ .offload_channel = false, \
+ .channel = cnum, \
+ }
+
+static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
+ MHI_CHANNEL_CONFIG_TX(12, "MBIM", 4, 0),
+ MHI_CHANNEL_CONFIG_RX(13, "MBIM", 4, 0),
+ MHI_CHANNEL_CONFIG_TX(14, "QMI", 4, 0),
+ MHI_CHANNEL_CONFIG_RX(15, "QMI", 4, 0),
+ MHI_CHANNEL_CONFIG_TX(20, "IPCR", 4, 0),
+ MHI_CHANNEL_CONFIG_RX(21, "IPCR", 4, 0),
+ MHI_CHANNEL_CONFIG_TX(100, "IP_HW0", 64, 1),
+ MHI_CHANNEL_CONFIG_RX(101, "IP_HW0", 64, 2),
How did you verify the data path/MBIM/QMI control path using SDx55 modem?
+};
+
+static const struct mhi_event_config modem_qcom_v1_mhi_events[] = {
+ /* first ring is control+data ring */
+ MHI_EVENT_CONFIG_CTRL(0),
+ /* Hardware channels request dedicated hardware event rings */
+ MHI_EVENT_CONFIG_HW_DATA(1, 100),
+ MHI_EVENT_CONFIG_HW_DATA(2, 101)
+};
+
+static const struct mhi_controller_config modem_qcom_v1_mhi_config = {
+ .max_channels = 128,
+ .timeout_ms = 5000,
+ .num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels),
+ .ch_cfg = modem_qcom_v1_mhi_channels,
+ .num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events),
+ .event_cfg = modem_qcom_v1_mhi_events,
+};
+
+static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
+ .name = "qcom-sdx55m",
+ .fw = "qcom/sdx55m/sbl1.mbn",
+ .edl = "qcom/sdx55m/edl.mbn",
+ .config = &modem_qcom_v1_mhi_config
+};
+
+static const struct pci_device_id mhi_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
+ .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
+
+static int mhi_pci_read_reg(struct mhi_controller *mhic, void __iomem *addr,
+ u32 *out)
+{
+ *out = readl(addr);
+ return 0;
+}
+
+static void mhi_pci_write_reg(struct mhi_controller *mhic, void __iomem *addr,
+ u32 val)
+{
+ writel(val, addr);
+}
+
+static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl,
+ enum mhi_callback cb)
+{
+ return;
+}
+
+static int mhi_pci_claim(struct mhi_controller *mhic)
+{
+ struct pci_dev *pdev = to_pci_dev(mhic->cntrl_dev);
+ int err;
+
+ err = pci_assign_resource(pdev, MHI_PCI_BAR_NUM);
+ if (err)
+ return err;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable pci device: %d\n", err);
+ return err;
+ }
+
+ err = pcim_iomap_regions(pdev, 1 << MHI_PCI_BAR_NUM, pci_name(pdev));
+ if (err) {
+ dev_err(&pdev->dev, "failed to map pci region: %d\n", err);
+ return err;
+ }
+ mhic->regs = pcim_iomap_table(pdev)[MHI_PCI_BAR_NUM];
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "Cannot set proper DMA mask\n");
+ return err;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "set consistent dma mask failed\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+
+static int mhi_pci_get_irqs(struct mhi_controller *mhic,
+ const struct mhi_controller_config *mhic_config)
+{
+ struct pci_dev *pdev = to_pci_dev(mhic->cntrl_dev);
+ int num_vectors, i;
+ int *irq;
+
+ /*
+ * Alloc one MSI vector per event ring, ideally...
+ * No explicit pci_free_irq_vectors required, done by pcim_release
+ */
+ num_vectors = pci_alloc_irq_vectors(pdev, 1, mhic_config->num_events,
By default MSI 0 is used for BHI intevec, pls refer mhi_async_power_up()
in mhi core (pm.c) which writes 0 to BHI_INTVEC register. Which means
all execution environment change, MHI reset completion, BHI and BHIe
status change interrupts are triggered using MSI 0 (handled using
mhi_intvec_handler. Since MSI0 is used for bhi intvec MSI 1 and above
are used for events.
+ PCI_IRQ_MSI);
+ if (num_vectors < 0) {
+ dev_err(&pdev->dev, "Error allocating MSI vectors %d\n",
+ num_vectors);
+ return num_vectors;
+ }
+
+ if (num_vectors < mhic_config->num_events) {
+ dev_warn(&pdev->dev, "Not enough MSI vectors (%d/%d)\n",
+ num_vectors, mhic_config->num_events);
+ /* use shared IRQ */
+ }
+
+ irq = devm_kcalloc(&pdev->dev, mhic_config->num_events, sizeof(int),
+ GFP_KERNEL);
+ if (!irq)
+ return -ENOMEM;
+
+ for (i = 0; i < mhic_config->num_events; i++) {
+ int vector = i >= num_vectors ? (num_vectors - 1) : i;
+
+ irq[i] = pci_irq_vector(pdev, vector);
+ }
+
+ mhic->irq = irq;
+ mhic->nr_irqs = mhic_config->num_events;
+
+ return 0;
+}
+
+static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl)
+{
+ /* no PM for now */
+ return 0;
+}
+
+static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
+{
+ /* no PM for now */
+ return;
+}
+
+static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
+ const struct mhi_controller_config *mhic_config;
+ struct mhi_controller *mhic;
+ int err;
+
+ dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name);
+
+ mhic = devm_kzalloc(&pdev->dev, sizeof(*mhic), GFP_KERNEL);
+ if (!mhic)
+ return -ENOMEM;
+
+ mhic_config = info->config;
+ mhic->cntrl_dev = &pdev->dev;
+ mhic->iova_start = 0;
+ mhic->iova_stop = 0xffffffff;
+ mhic->fw_image = info->fw;
+ mhic->edl_image = info->edl;
+
+ mhic->read_reg = mhi_pci_read_reg;
+ mhic->write_reg = mhi_pci_write_reg;
+ mhic->status_cb = mhi_pci_status_cb;
+ mhic->runtime_get = mhi_pci_runtime_get;
+ mhic->runtime_put = mhi_pci_runtime_put;
+
+ err = mhi_pci_claim(mhic);
+ if (err)
+ return err;
+
+ err = mhi_pci_get_irqs(mhic, mhic_config);
+ if (err)
+ return err;
+
+ pci_set_drvdata(pdev, mhic);
+
+ err = mhi_register_controller(mhic, mhic_config);
+ if (err)
+ return err;
+
+ /* MHI bus does not power up the controller by default */
+ err = mhi_prepare_for_power_up(mhic);
+ if (err) {
+ dev_err(&pdev->dev, "failed to prepare MHI controller\n");
+ goto err_unregister;
+ }
+
+ err = mhi_sync_power_up(mhic);
+ if (err) {
+ dev_err(&pdev->dev, "failed to power up MHI controller\n");
+ goto err_unprepare;
+ }
+
+ return 0;
+
+err_unprepare:
+ mhi_unprepare_after_power_down(mhic);
+
+err_unregister:
+ mhi_unregister_controller(mhic);
+
+ return err;
+}
+
+static void mhi_pci_remove(struct pci_dev *pdev)
+{
+ struct mhi_controller *mhic = pci_get_drvdata(pdev);
+
+ mhi_power_down(mhic, false);
+ mhi_unprepare_after_power_down(mhic);
+ mhi_unregister_controller(mhic);
+}
+
+static struct pci_driver mhi_pci_driver = {
+ .name = "mhi-pci-generic",
+ .id_table = mhi_pci_id_table,
+ .probe = mhi_pci_probe,
+ .remove = mhi_pci_remove
+};
+module_pci_driver(mhi_pci_driver);
+
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro,org>");
+MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver");
+MODULE_LICENSE("GPL");
Thanks,
Hemant
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
