[PATCH 3/3] soc: qcom: geni: Optimize select fifo/dma mode

[Douglas Anderson <dianders@xxxxxxxxxxxx>]

The functions geni_se_select_fifo_mode() and
geni_se_select_fifo_mode() are a little funny.  They read/write a
bunch of memory mapped registers even if they don't change or aren't
relevant for the current protocol.  Let's make them a little more
sane.

NOTE: there is no evidence at all that this makes any performance
difference and it fixes no bugs.  However, it seems (to me) like it
makes the functions a little easier to understand.  Decreasing the
amount of times we read/write memory mapped registers is also nice,
even if we are using "relaxed" variants.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 drivers/soc/qcom/qcom-geni-se.c | 44 ++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 20 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 751a49f6534f..746854745b15 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -266,49 +266,53 @@ EXPORT_SYMBOL(geni_se_init);
 static void geni_se_select_fifo_mode(struct geni_se *se)
 {
 	u32 proto = geni_se_read_proto(se);
-	u32 val;
+	u32 val, val_old;
 
 	geni_se_irq_clear(se);
 
-	val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
 	if (proto != GENI_SE_UART) {
+		val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
 		val |= M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN;
 		val |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
-	}
-	writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+		if (val != val_old)
+			writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
 
-	val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
-	if (proto != GENI_SE_UART)
-		val |= S_CMD_DONE_EN;
-	writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+		val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+		if (!(val & S_CMD_DONE_EN))
+			writel_relaxed(val | S_CMD_DONE_EN,
+				       se->base + SE_GENI_S_IRQ_EN);
+	}
 
 	val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
-	val &= ~GENI_DMA_MODE_EN;
-	writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
+	if (val & GENI_DMA_MODE_EN)
+		writel_relaxed(val & ~GENI_DMA_MODE_EN,
+			       se->base + SE_GENI_DMA_MODE_EN);
 }
 
 static void geni_se_select_dma_mode(struct geni_se *se)
 {
 	u32 proto = geni_se_read_proto(se);
-	u32 val;
+	u32 val, val_old;
 
 	geni_se_irq_clear(se);
 
-	val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
 	if (proto != GENI_SE_UART) {
+		val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
 		val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
 		val &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
-	}
-	writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+		if (val != val_old)
+			writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
 
-	val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
-	if (proto != GENI_SE_UART)
-		val &= ~S_CMD_DONE_EN;
-	writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+		val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+		if (val & S_CMD_DONE_EN)
+			writel_relaxed(val & ~S_CMD_DONE_EN,
+				       se->base + SE_GENI_S_IRQ_EN);
+	}
 
 	val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
-	val |= GENI_DMA_MODE_EN;
-	writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
+	if (!(val & GENI_DMA_MODE_EN))
+		writel_relaxed(val | GENI_DMA_MODE_EN,
+			       se->base + SE_GENI_DMA_MODE_EN);
 }
 
 /**
-- 
2.28.0.1011.ga647a8990f-goog