The OnePlus 6/T handsets are based on the SDM845 platform and were
released in late 2017.
Add a device tree with support for the following:
* Display panel (with the oneplus-6 panel driver)
* Hardware accelerated graphics
* Touch screen support with Synaptics rmi4
* RTC support
* Remoteprocessors boot and can be interacted with over QRTR.
* ath10k WLAN using pd-mapper, rmts and tqftpserv daemons
* Bluetooth
* Volume / power buttons and OnePlus Tri-State switch are functional
* USB
The only differences between the devices is the different panels,
fingerprint readers and that the 6T lacks a headphone jack and notification
LED.
Current limitations:
* Bluetooth does not appear in rfkill, this is most likely the reason
it doesn't appear in UI bluetooth settings, it can be interacted
with using bluez-utils bluetoothctl.
* USB is forced to peripheral mode as cable type detection is broken
drm/panel/oneplus6: Add panel-oneplus6
dt-bindings: panel: add documentation for oneplus6 panel
arm64: dts: sdm845: add oneplus 6/t devices
dt-bindings: add vendor bindings for OnePlus
i2c: geni: sdm845: dont perform DMA for the oneplus6
Documentation/devicetree/bindings/arm/oneplus/oneplus-boards.yaml | 25 --
Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml | 73 ----
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 -
arch/arm64/boot/dts/qcom/Makefile | 2 -
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 860 ---------------------------------------
arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 19 -
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts | 19 -
drivers/gpu/drm/panel/Kconfig | 10 -
drivers/gpu/drm/panel/Makefile | 1 -
