On Sat, Sep 26, 2020 at 02:51:43PM +0200, kholk11@xxxxxxxxx wrote:
> From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
>
> Resetting the VBIF before power collapse is done to avoid getting
> bogus FIFO entries during the suspend sequence or subsequent resume,
> but this is doable only on Adreno 510 and Adreno 530, as the other
> units will tendentially lock up.
> Especially on Adreno 508, the GPU will show lockups and very bad
> slownesses after processing the first frame.
>
> Avoiding to execute the RBBM SW Reset before suspend will stop the
> lockup issue from happening on at least Adreno 508/509/512.
Reviewed-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> ---
> drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> index 9bcbf6cd5a28..00df5de3c8e3 100644
> --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> @@ -1306,10 +1306,12 @@ static int a5xx_pm_suspend(struct msm_gpu *gpu)
>
> /*
> * Reset the VBIF before power collapse to avoid issue with FIFO
> - * entries
> + * entries on Adreno A510 and A530 (the others will tend to lock up)
> */
> - gpu_write(gpu, REG_A5XX_RBBM_BLOCK_SW_RESET_CMD, 0x003C0000);
> - gpu_write(gpu, REG_A5XX_RBBM_BLOCK_SW_RESET_CMD, 0x00000000);
> + if (adreno_is_a510(adreno_gpu) || adreno_is_a530(adreno_gpu)) {
> + gpu_write(gpu, REG_A5XX_RBBM_BLOCK_SW_RESET_CMD, 0x003C0000);
> + gpu_write(gpu, REG_A5XX_RBBM_BLOCK_SW_RESET_CMD, 0x00000000);
> + }
>
> return msm_gpu_pm_suspend(gpu);
> }
> --
> 2.28.0
>
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
