The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064
devices. It was tested that while apq doesn't require the padding, ipq
SoC must use it or the kernel hangs on boot.
Fixes: de3c4bf6489 ("PCI: qcom: Add support for tx term offset for rev 2.1.0")
Reported-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
Signed-off-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v4.19+
---
drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 3aac77a295ba..dad6e9ce66ba 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -387,7 +387,9 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
/* enable external reference clock */
val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
- val &= ~PHY_REFCLK_USE_PAD;
+ /* USE_PAD is required only for ipq806x */
+ if (!of_device_is_compatible(node, "qcom,pcie-apq8064"))
+ val &= ~PHY_REFCLK_USE_PAD;
val |= PHY_REFCLK_SSP_EN;
writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
--
2.27.0
