From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
This commit adds the support for some regulator types that are
missing in this driver, such as the ht nmos-ldo, ht-lv nmos-ldo
and new gen n/pmos-ldo, all belonging to the FTSMPS426 register
layout.
This is done in preparation for adding support for the PM660 and
PM660L PMICs.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
---
drivers/regulator/qcom_spmi-regulator.c | 56 +++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 05080483fe1b..0a507c7f4ae1 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -135,6 +135,18 @@ enum spmi_regulator_subtype {
SPMI_REGULATOR_SUBTYPE_LV_P600 = 0x2b,
SPMI_REGULATOR_SUBTYPE_LV_P1200 = 0x2c,
SPMI_REGULATOR_SUBTYPE_LV_P450 = 0x2d,
+ SPMI_REGULATOR_SUBTYPE_HT_N300_ST = 0x30,
+ SPMI_REGULATOR_SUBTYPE_HT_N600_ST = 0x31,
+ SPMI_REGULATOR_SUBTYPE_HT_N1200_ST = 0x32,
+ SPMI_REGULATOR_SUBTYPE_HT_LVP150 = 0x3b,
+ SPMI_REGULATOR_SUBTYPE_HT_LVP300 = 0x3c,
+ SPMI_REGULATOR_SUBTYPE_L660_N300_ST = 0x42,
+ SPMI_REGULATOR_SUBTYPE_L660_N600_ST = 0x43,
+ SPMI_REGULATOR_SUBTYPE_L660_P50 = 0x46,
+ SPMI_REGULATOR_SUBTYPE_L660_P150 = 0x47,
+ SPMI_REGULATOR_SUBTYPE_L660_P600 = 0x49,
+ SPMI_REGULATOR_SUBTYPE_L660_LVP150 = 0x4d,
+ SPMI_REGULATOR_SUBTYPE_L660_LVP600 = 0x4f,
SPMI_REGULATOR_SUBTYPE_LV100 = 0x01,
SPMI_REGULATOR_SUBTYPE_LV300 = 0x02,
SPMI_REGULATOR_SUBTYPE_MV300 = 0x08,
@@ -511,6 +523,22 @@ static struct spmi_voltage_range ult_pldo_ranges[] = {
SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
};
+static struct spmi_voltage_range pldo660_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 1504000, 1504000, 3544000, 3544000, 8000),
+};
+
+static struct spmi_voltage_range nldo660_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 320000, 320000, 1304000, 1304000, 8000),
+};
+
+static struct spmi_voltage_range ht_lvpldo_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 1504000, 1504000, 2000000, 2000000, 8000),
+};
+
+static struct spmi_voltage_range ht_nldo_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 312000, 312000, 1304000, 1304000, 8000),
+};
+
static struct spmi_voltage_range hfs430_ranges[] = {
SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000),
};
@@ -530,6 +558,10 @@ static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
static DEFINE_SPMI_SET_POINTS(ult_nldo);
static DEFINE_SPMI_SET_POINTS(ult_pldo);
+static DEFINE_SPMI_SET_POINTS(pldo660);
+static DEFINE_SPMI_SET_POINTS(nldo660);
+static DEFINE_SPMI_SET_POINTS(ht_lvpldo);
+static DEFINE_SPMI_SET_POINTS(ht_nldo);
static DEFINE_SPMI_SET_POINTS(hfs430);
static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
@@ -1443,6 +1475,30 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
SPMI_VREG(LDO, LV_P300, 0, INF, LDO, ldo, pldo, 10000),
SPMI_VREG(LDO, LV_P600, 0, INF, LDO, ldo, pldo, 10000),
SPMI_VREG(LDO, LV_P1200, 0, INF, LDO, ldo, pldo, 10000),
+ SPMI_VREG(LDO, HT_N300_ST, 0, INF, FTSMPS426, ftsmps426,
+ ht_nldo, 30000),
+ SPMI_VREG(LDO, HT_N600_ST, 0, INF, FTSMPS426, ftsmps426,
+ ht_nldo, 30000),
+ SPMI_VREG(LDO, HT_N1200_ST, 0, INF, FTSMPS426, ftsmps426,
+ ht_nldo, 30000),
+ SPMI_VREG(LDO, HT_LVP150, 0, INF, FTSMPS426, ftsmps426,
+ ht_lvpldo, 10000),
+ SPMI_VREG(LDO, HT_LVP300, 0, INF, FTSMPS426, ftsmps426,
+ ht_lvpldo, 10000),
+ SPMI_VREG(LDO, L660_N300_ST, 0, INF, FTSMPS426, ftsmps426,
+ nldo660, 10000),
+ SPMI_VREG(LDO, L660_N600_ST, 0, INF, FTSMPS426, ftsmps426,
+ nldo660, 10000),
+ SPMI_VREG(LDO, L660_P50, 0, INF, FTSMPS426, ftsmps426,
+ pldo660, 10000),
+ SPMI_VREG(LDO, L660_P150, 0, INF, FTSMPS426, ftsmps426,
+ pldo660, 10000),
+ SPMI_VREG(LDO, L660_P600, 0, INF, FTSMPS426, ftsmps426,
+ pldo660, 10000),
+ SPMI_VREG(LDO, L660_LVP150, 0, INF, FTSMPS426, ftsmps426,
+ ht_lvpldo, 10000),
+ SPMI_VREG(LDO, L660_LVP600, 0, INF, FTSMPS426, ftsmps426,
+ ht_lvpldo, 10000),
SPMI_VREG_VS(LV100, 0, INF),
SPMI_VREG_VS(LV300, 0, INF),
SPMI_VREG_VS(MV300, 0, INF),
--
2.28.0
