Re: [PATCH v3] Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rocky,

> This patch add support for WCN6855 i.e. patch and nvm download
> support.

please always include the content of /sys/kernel/debug/usb/devices for this hardware.

> 
> Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx>
> ---
> drivers/bluetooth/btusb.c | 66 +++++++++++++++++++++++++++++++--------
> 1 file changed, 53 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 9f294b941943..e888e4c02d69 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -59,6 +59,7 @@ static struct usb_driver btusb_driver;
> #define BTUSB_MEDIATEK		0x200000
> #define BTUSB_WIDEBAND_SPEECH	0x400000
> #define BTUSB_VALID_LE_STATES   0x800000
> +#define BTUSB_QCA_WCN6855	0x1000000
> 
> static const struct usb_device_id btusb_table[] = {
> 	/* Generic Bluetooth USB device */
> @@ -291,6 +292,10 @@ static const struct usb_device_id blacklist_table[] = {
> 	{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME |
> 						     BTUSB_WIDEBAND_SPEECH },
> 
> +	/* QCA WCN6855 chipset */
> +	{ USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
> +						     BTUSB_WIDEBAND_SPEECH },
> +
> 	/* Broadcom BCM2035 */
> 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
> 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
> @@ -3409,6 +3414,27 @@ static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
> 	return 0;
> }
> 
> +static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
> +				const bdaddr_t *bdaddr)
> +{
> +	struct sk_buff *skb;
> +	u8 buf[6];
> +	long ret;
> +
> +	memcpy(buf, bdaddr, sizeof(bdaddr_t));
> +
> +	skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf,
> +				HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		ret = PTR_ERR(skb);
> +		bt_dev_err(hdev, "Change address command failed (%ld)", ret);
> +		return ret;
> +	}
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +
> #define QCA_DFU_PACKET_LEN	4096
> 
> #define QCA_GET_TARGET_VERSION	0x09
> @@ -3428,7 +3454,8 @@ struct qca_version {
> } __packed;
> 
> struct qca_rampatch_version {
> -	__le16	rom_version;
> +	__le16	rom_version_high;
> +	__le16  rom_version_low;
> 	__le16	patch_version;
> } __packed;

How does this work. The struct now has an extra 16-bit in the middle. Is this backwards compatible?

> 
> @@ -3440,12 +3467,14 @@ struct qca_device_info {
> };
> 
> static const struct qca_device_info qca_devices_table[] = {
> -	{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
> -	{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
> -	{ 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
> -	{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
> -	{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
> -	{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
> +	{ 0x00000100, 20, 4, 8 }, /* Rome 1.0 */
> +	{ 0x00000101, 20, 4, 8 }, /* Rome 1.1 */

Align it with 8  }

> +	{ 0x00000200, 28, 4, 16 }, /* Rome 2.0 */
> +	{ 0x00000201, 28, 4, 16 }, /* Rome 2.1 */
> +	{ 0x00000300, 28, 4, 16 }, /* Rome 3.0 */
> +	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> +	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> +	{ 0x00130200, 40, 4, 16 }  /* WCN6855 2.0 */

And the last one should also be },

> };
> 
> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
> @@ -3547,8 +3576,8 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
> {
> 	struct qca_rampatch_version *rver;
> 	const struct firmware *fw;
> -	u32 ver_rom, ver_patch;
> -	u16 rver_rom, rver_patch;
> +	u32 ver_rom, ver_patch, rver_rom;
> +	u16 rver_rom_low, rver_rom_high, rver_patch;
> 	char fwname[64];
> 	int err;
> 
> @@ -3567,9 +3596,16 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
> 	bt_dev_info(hdev, "using rampatch file: %s", fwname);
> 
> 	rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
> -	rver_rom = le16_to_cpu(rver->rom_version);
> +	rver_rom_low = le16_to_cpu(rver->rom_version_low);
> 	rver_patch = le16_to_cpu(rver->patch_version);
> 
> +	if (ver_rom & ~0xffffU) {
> +		rver_rom_high = le16_to_cpu(rver->rom_version_high);
> +		rver_rom = le32_to_cpu(rver_rom_high << 16 | rver_rom_low);
> +	} else {
> +		rver_rom = rver_rom_low;
> +	}
> +
> 	bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
> 		    "firmware rome 0x%x build 0x%x",
> 		    rver_rom, rver_patch, ver_rom, ver_patch);
> @@ -3643,9 +3679,6 @@ static int btusb_setup_qca(struct hci_dev *hdev)
> 		return err;
> 
> 	ver_rom = le32_to_cpu(ver.rom_version);
> -	/* Don't care about high ROM versions */
> -	if (ver_rom & ~0xffffU)
> -		return 0;
> 
> 	for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
> 		if (ver_rom == qca_devices_table[i].rom_version)
> @@ -4081,6 +4114,13 @@ static int btusb_probe(struct usb_interface *intf,
> 		btusb_check_needs_reset_resume(intf);
> 	}
> 
> +	if (id->driver_info & BTUSB_QCA_WCN6855) {
> +		data->setup_on_usb = btusb_setup_qca;
> +		hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
> +		hdev->cmd_timeout = btusb_qca_cmd_timeout;
> +		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
> +	}
> +
> 	if (id->driver_info & BTUSB_AMP) {
> 		/* AMP controllers do not support SCO packets */
> 		data->isoc = NULL;

Regards

Marcel




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux