Re: [PATCH v6 4/4] bus: mhi: Add userspace client interface driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jeff,

On 9/18/20 1:08 PM, Jeffrey Hugo wrote:
On 9/16/2020 1:56 PM, Hemant Kumar wrote:
This MHI client driver allows userspace clients to transfer
raw data between MHI device and host using standard file operations.
Device file node is created with format

/dev/mhi_<controller_name>_<mhi_device_name>

Currently it supports LOOPBACK channel.

Signed-off-by: Hemant Kumar <hemantk@xxxxxxxxxxxxxx>
...
...
+
+static ssize_t mhi_uci_write(struct file *file,
+                 const char __user *buf,
+                 size_t count,
+                 loff_t *offp)
+{
+    struct uci_dev *udev = file->private_data;
+    struct mhi_device *mhi_dev = udev->mhi_dev;
+    struct device *dev = &mhi_dev->dev;
+    struct uci_chan *uchan = &udev->ul_chan;
+    size_t bytes_xfered = 0;
+    int ret, nr_avail = 0;
+
+    if (!buf || !count)
+        return -EINVAL;
+
+    /* confirm channel is active */
+    mutex_lock(&udev->lock);
+    if (!udev->enabled) {
+        ret = -ENODEV;
+        goto err_mtx_unlock;
+    }
+
+    dev_dbg(dev, "%s: to xfer: %lu bytes\n", __func__, count);
+
+    while (count) {
+        size_t xfer_size;
+        void *kbuf;
+        enum mhi_flags flags;
+
+        mutex_unlock(&udev->lock);
+        /* wait for free descriptors */
+        ret = wait_event_interruptible(uchan->wq,
+                           (!udev->enabled) ||
+                (nr_avail = mhi_get_no_free_descriptors(mhi_dev,
+                           DMA_TO_DEVICE)) > 0);
+
+        mutex_lock(&udev->lock);

It feels like there is a race here.  What if we wait because there are no free descriptors, one becomes available, but someone else manages to grab the mutex before we do, and consume it?  mhi_queue_buf() will fail later on, and I don't think thats intended.
I agree Jeff, one option i can think of having separate read and write lock so that writer can hold lock if TREs are not available but reader can continue.

+        if (ret == -ERESTARTSYS) {
+            dev_dbg(dev, "Exit signal caught for node\n");
+            goto err_mtx_unlock;
+        }
+
+        if (!udev->enabled) {
+            ret = -ENODEV;
+            goto err_mtx_unlock;
+        }
+
+        xfer_size = min_t(size_t, count, udev->mtu);
+        kbuf = kmalloc(xfer_size, GFP_KERNEL);
+        if (!kbuf) {
+            ret = -ENOMEM;
+            goto err_mtx_unlock;
+        }
+
+        ret = copy_from_user(kbuf, buf, xfer_size);
+        if (ret) {
+            kfree(kbuf);
+            ret = -EFAULT;
+            goto err_mtx_unlock;
+        }
+
+        /* if ring is full after this force EOT */
+        if (nr_avail > 1 && (count - xfer_size))
+            flags = MHI_CHAIN;
+        else
+            flags = MHI_EOT;
+
+        if (udev->enabled)
+            ret = mhi_queue_buf(mhi_dev, DMA_TO_DEVICE, kbuf,
+                        xfer_size, flags);
+        else
+            ret = -ENODEV;
+
+        if (ret) {
+            kfree(kbuf);
+            goto err_mtx_unlock;
+        }
+
+        bytes_xfered += xfer_size;
+        count -= xfer_size;
+        buf += xfer_size;
+    }
+
+    mutex_unlock(&udev->lock);
+    dev_dbg(dev, "%s: bytes xferred: %lu\n", __func__, bytes_xfered);
+
+    return bytes_xfered;
+
+err_mtx_unlock:
+    mutex_unlock(&udev->lock);
+
+    return ret;
+}
+
+static ssize_t mhi_uci_read(struct file *file,
+                char __user *buf,
+                size_t count,
+                loff_t *ppos)
+{
+    struct uci_dev *udev = file->private_data;
+    struct mhi_device *mhi_dev = udev->mhi_dev;
+    struct uci_chan *uchan = &udev->dl_chan;
+    struct device *dev = &mhi_dev->dev;
+    struct uci_buf *ubuf;
+    char *ptr;
+    size_t to_copy;
+    int ret = 0;
+
+    if (!buf)
+        return -EINVAL;
+
+    mutex_lock(&udev->lock);
+    /* confirm channel is active */
+    if (!udev->enabled) {
+        ret = -ENODEV;
+        goto err_mtx_unlock;
+    }
+
+    spin_lock_bh(&uchan->lock);
+    /* No data available to read, wait */
+    if (!uchan->cur_buf && list_empty(&uchan->pending)) {
+        dev_dbg(dev, "No data available to read waiting\n");
+
+        spin_unlock_bh(&uchan->lock);
+        mutex_unlock(&udev->lock);
+        ret = wait_event_interruptible(uchan->wq,
+                           (!udev->enabled ||
+                          !list_empty(&uchan->pending)));
+
+        mutex_lock(&udev->lock);
+        if (ret == -ERESTARTSYS) {
+            dev_dbg(dev, "Exit signal caught for node\n");
+            goto err_mtx_unlock;
+        }
+
+        if (!udev->enabled) {
+            ret = -ENODEV;
+            goto err_mtx_unlock;
+        }
+        spin_lock_bh(&uchan->lock);
+    }
+
+    /* new read, get the next descriptor from the list */
+    if (!uchan->cur_buf) {
+        ubuf = list_first_entry_or_null(&uchan->pending,
+                        struct uci_buf, node);
+        if (!ubuf) {
+            ret = -EIO;
+            goto err_spin_unlock;
+        }
+
+        list_del(&ubuf->node);
+        uchan->cur_buf = ubuf;
+        uchan->rx_size = ubuf->len;
+        dev_dbg(dev, "Got pkt of size: %zu\n", uchan->rx_size);
+    }
+
+    ubuf = uchan->cur_buf;
+
+    /* Copy the buffer to user space */
+    to_copy = min_t(size_t, count, uchan->rx_size);
+    ptr = ubuf->data + (ubuf->len - uchan->rx_size);
+    spin_unlock_bh(&uchan->lock);
+
+    ret = copy_to_user(buf, ptr, to_copy);
+    if (ret) {
+        ret = -EFAULT;
+        goto err_mtx_unlock;
+    }
+
+    spin_lock_bh(&uchan->lock);
+
+    dev_dbg(dev, "Copied %lu of %lu bytes\n", to_copy, uchan->rx_size);
+    uchan->rx_size -= to_copy;
+
+    /* we finished with this buffer, queue it back to hardware */
+    if (!uchan->rx_size) {
+        uchan->cur_buf = NULL;
+
+        if (udev->enabled)
+            ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE,
+                        ubuf->data,
+                        udev->actual_mtu, MHI_EOT);
+        else
+            ret = -ENODEV;
+
+        if (ret) {
+            dev_err(dev, "Failed to recycle element: %d\n", ret);
+            kfree(ubuf->data);
+            goto err_spin_unlock;
+        }
+    }
+    spin_unlock_bh(&uchan->lock);
+    mutex_unlock(&udev->lock);
+
+    dev_dbg(dev, "%s: Returning %lu bytes\n", __func__, to_copy);
+
+    return to_copy;
+
+err_spin_unlock:
+    spin_unlock_bh(&uchan->lock);
+err_mtx_unlock:
+    mutex_unlock(&udev->lock);
+    return ret;
+}
+
+static int mhi_uci_open(struct inode *inode, struct file *filp)
+{
+    struct uci_dev *udev = NULL;
+    unsigned int minor = iminor(inode);
+    int ret = -EIO;
+    struct uci_buf *buf_itr, *tmp;
+    struct uci_chan *dl_chan;
+    struct mhi_device *mhi_dev;
+    struct device *dev;
+
+    mutex_lock(&uci_idr_mutex);
+    udev = idr_find(&uci_idr, minor);
+    mutex_unlock(&uci_idr_mutex);
+    if (!udev) {
+        pr_err("uci dev: minor %d not found\n", minor);
+        ret = -ENODEV;
+        goto error_no_dev;
+    }
+
+    kref_get(&udev->ref_count);
+
+    mhi_dev = udev->mhi_dev;

mhi_dev never gets used.  You could use it down at the prepare_for_transfer, but you don't.  Might as well just remove this from the stack.
this was done to pass dev pointer instead of udev->mhi_dev->dev.

+    dev = &mhi_dev->dev;
+
+    mutex_lock(&udev->lock);
+    if (kref_read(&udev->ref_count) > 2) {
+        dev_dbg(dev, "Node already opened\n");
+        goto exit_uci_open;
+    }
+
+    if (!udev->enabled) {
+        dev_info(dev, "Node exists, but is not in active state!\n");
+        goto error_open_chan;
+    }
+
+    dev_dbg(dev, "Starting channel\n");
+    ret = mhi_prepare_for_transfer(udev->mhi_dev);
+    if (ret) {
+        dev_err(dev, "Error starting transfer channels\n");
+        goto error_open_chan;
+    }
+
+    ret = mhi_queue_inbound(udev);
+    if (ret)
+        goto error_rx_queue;
+
+exit_uci_open:
+    filp->private_data = udev;
+    mutex_unlock(&udev->lock);
+
+    return 0;
+
+error_rx_queue:
+    dl_chan = &udev->dl_chan;
+    mhi_unprepare_from_transfer(udev->mhi_dev);
+    list_for_each_entry_safe(buf_itr, tmp, &dl_chan->pending, node) {
+        list_del(&buf_itr->node);
+        kfree(buf_itr->data);
+    }
+error_open_chan:
+    mutex_unlock(&udev->lock);
+    kref_put(&udev->ref_count, mhi_uci_dev_release);
+error_no_dev:
+    return ret;
+}
+
+static const struct file_operations mhidev_fops = {
+    .owner = THIS_MODULE,
+    .open = mhi_uci_open,
+    .release = mhi_uci_release,
+    .read = mhi_uci_read,
+    .write = mhi_uci_write,
+    .poll = mhi_uci_poll,
+};
+
+static void mhi_ul_xfer_cb(struct mhi_device *mhi_dev,
+               struct mhi_result *mhi_result)
+{
+    struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev);
+    struct uci_chan *uchan = &udev->ul_chan;
+    struct device *dev = &mhi_dev->dev;
+
+    dev_dbg(dev, "status: %d xfer_len: %zu\n",
+        mhi_result->transaction_status, mhi_result->bytes_xferd);
+
+    kfree(mhi_result->buf_addr);
+
+    if (!mhi_result->transaction_status)
+        wake_up(&uchan->wq);
+}
+
+static void mhi_dl_xfer_cb(struct mhi_device *mhi_dev,
+               struct mhi_result *mhi_result)
+{
+    struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev);
+    struct uci_chan *uchan = &udev->dl_chan;
+    struct device *dev = &mhi_dev->dev;
+    struct uci_buf *buf;
+
+    dev_dbg(dev, "status: %d receive_len: %zu\n",
+        mhi_result->transaction_status, mhi_result->bytes_xferd);
+
+    if (mhi_result->transaction_status == -ENOTCONN) {
+        kfree(mhi_result->buf_addr);
+        return;
+    }
+
+    spin_lock_bh(&uchan->lock);
+    buf = mhi_result->buf_addr + udev->actual_mtu;
+    buf->data = mhi_result->buf_addr;
+    buf->len = mhi_result->bytes_xferd;
+    list_add_tail(&buf->node, &uchan->pending);
+    spin_unlock_bh(&uchan->lock);
+
+    wake_up(&uchan->wq);
+}
+
+static int mhi_uci_probe(struct mhi_device *mhi_dev,
+             const struct mhi_device_id *id)
+{
+    struct uci_dev *udev;
+    struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+    struct device *dev;
+    int index, dir;
+
+    udev = kzalloc(sizeof(*udev), GFP_KERNEL);

What if you defer creating the udev until the first open(), and tie the xfer prepare state to the ref count of the udev instance?
With current implementation udev and minor are mapped using idr_alloc.
i was thinking about another option of adding kref for uci_chann object
to take care of channel and buffer ref count.

+    if (!udev)
+        return -ENOMEM;
+
+    kref_init(&udev->ref_count);
+    mutex_init(&udev->lock);
+    udev->mhi_dev = mhi_dev;
+
+    mutex_lock(&udev->lock);
+
+    mutex_lock(&uci_idr_mutex);
+    index = idr_alloc(&uci_idr, udev, 0, MAX_UCI_MINORS, GFP_KERNEL);
+    mutex_unlock(&uci_idr_mutex);
+    if (index < 0) {
+        mutex_unlock(&udev->lock);
+        kfree(udev);
+        return index;
+    }
+
+    udev->minor = index;
+
+    /* create device file node /dev/mhi_<cntrl_dev_name>_<mhi_dev_name> */
+    dev = device_create(uci_dev_class, &mhi_dev->dev,
+                MKDEV(uci_dev_major, index), udev,
+                DEVICE_NAME "_%s_%s",

DEVICE_NAME is only used here.  Doesn't seem like having a macro is providing much value.  I suggest just inlining the value.

+                dev_name(mhi_cntrl->cntrl_dev), mhi_dev->name);
+    if (IS_ERR(dev)) {
+        mutex_lock(&uci_idr_mutex);
+        idr_remove(&uci_idr, udev->minor);
+        mutex_unlock(&uci_idr_mutex);
+        mutex_unlock(&udev->lock);
+        kfree(udev);
+        return PTR_ERR(dev);
+    }
+
+    for (dir = 0; dir < 2; dir++) {
+        struct uci_chan *uchan = (dir) ?
+            &udev->ul_chan : &udev->dl_chan;
+        spin_lock_init(&uchan->lock);
+        init_waitqueue_head(&uchan->wq);
+        INIT_LIST_HEAD(&uchan->pending);
+    }
+
+    udev->mtu = min_t(size_t, id->driver_data, MHI_MAX_MTU);
+    udev->actual_mtu = udev->mtu - sizeof(struct uci_buf);

"mtu" vs "actual_mtu" seems to be very confusing.  To start, why not "tx_mtu" and "rx_mtu"?  But going from there, why have different mtus for tx and rx?  Why not just increase the rx allocations by the required "header" (struct uci_buf) as needed to keep symetry?
in past we had issues with order of 3 allocation failures for bigger mtu size, so we decided to use memory within the mtu buffer. i can add tx_mtu and rx_mtu if that makes it clear.

+    dev_set_drvdata(&mhi_dev->dev, udev);
+    udev->enabled = true;
+
+    mutex_unlock(&udev->lock);
+
+    dev_info(&mhi_dev->dev, "probed uci dev: minor %d\n", index);
+
+    return 0;
+};
+
+static void mhi_uci_remove(struct mhi_device *mhi_dev)
+{
+    struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev);
+
+    mutex_lock(&udev->lock);
+
+    /* disable the node */
+    udev->enabled = false;
+
+    wake_up(&udev->dl_chan.wq);
+    wake_up(&udev->ul_chan.wq);
+
+    /* delete the node to prevent new opens */
+    device_destroy(uci_dev_class, MKDEV(uci_dev_major, udev->minor));
+
+    mutex_lock(&uci_idr_mutex);
+    idr_remove(&uci_idr, udev->minor);
+    mutex_unlock(&uci_idr_mutex);
+
+    mutex_unlock(&udev->lock);
+
+    kref_put(&udev->ref_count, mhi_uci_dev_release);
+}
+
+/* .driver_data stores max mtu */
+static const struct mhi_device_id mhi_uci_match_table[] = {
+    { .chan = "LOOPBACK", .driver_data = 0x1000},
+    {},
+};
+MODULE_DEVICE_TABLE(mhi, mhi_uci_match_table);
+
+static struct mhi_driver mhi_uci_driver = {
+    .id_table = mhi_uci_match_table,
+    .remove = mhi_uci_remove,
+    .probe = mhi_uci_probe,
+    .ul_xfer_cb = mhi_ul_xfer_cb,
+    .dl_xfer_cb = mhi_dl_xfer_cb,
+    .driver = {
+        .name = MHI_UCI_DRIVER_NAME,
+    },
+};
+
+static int mhi_uci_init(void)
+{
+    int ret;
+
+    ret = register_chrdev(0, MHI_UCI_DRIVER_NAME, &mhidev_fops);
+    if (ret < 0)
+        return ret;
+
+    uci_dev_major = ret;
+    uci_dev_class = class_create(THIS_MODULE, MHI_UCI_DRIVER_NAME);
+    if (IS_ERR(uci_dev_class)) {
+        unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME);
+        return -ENODEV;
+    }
+
+    ret = mhi_driver_register(&mhi_uci_driver);
+    if (ret) {
+        class_destroy(uci_dev_class);
+        unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME);
+    }
+
+    return ret;
+}
+
+static void __exit mhi_uci_exit(void)
+{
+    mhi_driver_unregister(&mhi_uci_driver);
+    class_destroy(uci_dev_class);
+    unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME);

I think you need an idr_destroy() of uci_idr here.
Done.

+}
+
+module_init(mhi_uci_init);
+module_exit(mhi_uci_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MHI UCI Driver");



--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux