There is no requirement for using a dedicated IRQ per event ring.
Some systems does not support multiple MSI vectors (e.g. intel
without CONFIG_IRQ_REMAP), In that case the MHI controller can
configure all the event rings to use the same interrupt (as fallback).
Allow this by removing the nr_irqs = ev_ring test and add extra check
in the irq_setup function.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
v2: keep nr_irqs check early in init sequence
drivers/bus/mhi/core/init.c | 7 +++++++
drivers/bus/mhi/core/pm.c | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 19ade8a..31961af 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -125,6 +125,13 @@ int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl)
if (mhi_event->offload_ev)
continue;
+ if (mhi_event->irq >= mhi_cntrl->nr_irqs) {
+ dev_err(dev, "irq %d not available for event ring\n",
+ mhi_event->irq);
+ ret = -EINVAL;
+ goto error_request;
+ }
+
ret = request_irq(mhi_cntrl->irq[mhi_event->irq],
mhi_irq_handler,
IRQF_SHARED | IRQF_NO_SUSPEND,
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index ce4d969..3de7b16 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -918,7 +918,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
dev_info(dev, "Requested to power ON\n");
- if (mhi_cntrl->nr_irqs < mhi_cntrl->total_ev_rings)
+ if (mhi_cntrl->nr_irqs < 1)
return -EINVAL;
/* Supply default wake routines if not provided by controller driver */
--
2.7.4
