Bug fixes and improvements for MHI powerup and shutdown handling. Firmware load function names are updated to accurately reflect their purpose. Closed certain design gaps where the host (MHI bus) would allow clients to operate after a power down or error detection. Move to an error state sooner based on different scenarios. These patches were tested on arm64 and X86_64 architectures. Bhaumik Bhatt (10): bus: mhi: core: Use appropriate names for firmware load functions bus: mhi: core: Move to using high priority workqueue bus: mhi: core: Skip device wake in error or shutdown states bus: mhi: core: Use the IRQF_ONESHOT flag for the BHI interrupt line bus: mhi: core: Disable IRQs when powering down bus: mhi: core: Improve shutdown handling after link down detection bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability bus: mhi: core: Move to an error state on any firmware load failure bus: mhi: core: Move to an error state on mission mode failure bus: mhi: core: Mark device inactive soon after host issues a shutdown drivers/bus/mhi/core/boot.c | 59 ++++++++++++++++++++++----------------- drivers/bus/mhi/core/init.c | 10 ++++++- drivers/bus/mhi/core/internal.h | 1 + drivers/bus/mhi/core/main.c | 28 +++++++++++++------ drivers/bus/mhi/core/pm.c | 62 ++++++++++++++++++++++++++++------------- include/linux/mhi.h | 2 ++ 6 files changed, 108 insertions(+), 54 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
