[PATCH] bus: mhi: Remove auto-start option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is really no point having an auto-start for channels.
This is confusing for the device drivers, some have to enable the
channels, others don't have... and waste resources (e.g. pre allocated
buffers) that may never be used.

This is really up to the MHI device(channel) driver to manage the state
of its channels.

Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
 drivers/bus/mhi/core/init.c     | 9 ---------
 drivers/bus/mhi/core/internal.h | 1 -
 include/linux/mhi.h             | 2 --
 net/qrtr/mhi.c                  | 5 +++++
 4 files changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index ac19067..7aef6b7 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -727,7 +727,6 @@ static int parse_ch_cfg(struct mhi_controller *mhi_cntrl,
 		mhi_chan->offload_ch = ch_cfg->offload_channel;
 		mhi_chan->db_cfg.reset_req = ch_cfg->doorbell_mode_switch;
 		mhi_chan->pre_alloc = ch_cfg->auto_queue;
-		mhi_chan->auto_start = ch_cfg->auto_start;
 
 		/*
 		 * If MHI host allocates buffers, then the channel direction
@@ -1125,11 +1124,6 @@ static int mhi_driver_probe(struct device *dev)
 			goto exit_probe;
 
 		ul_chan->xfer_cb = mhi_drv->ul_xfer_cb;
-		if (ul_chan->auto_start) {
-			ret = mhi_prepare_channel(mhi_cntrl, ul_chan);
-			if (ret)
-				goto exit_probe;
-		}
 	}
 
 	ret = -EINVAL;
@@ -1163,9 +1157,6 @@ static int mhi_driver_probe(struct device *dev)
 	if (ret)
 		goto exit_probe;
 
-	if (dl_chan && dl_chan->auto_start)
-		mhi_prepare_channel(mhi_cntrl, dl_chan);
-
 	mhi_device_put(mhi_dev);
 
 	return ret;
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 5a81a42..73b52a0 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -563,7 +563,6 @@ struct mhi_chan {
 	bool configured;
 	bool offload_ch;
 	bool pre_alloc;
-	bool auto_start;
 	bool wake_capable;
 };
 
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index 008b8f6..742dabe 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -214,7 +214,6 @@ enum mhi_db_brst_mode {
  * @offload_channel: The client manages the channel completely
  * @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition
  * @auto_queue: Framework will automatically queue buffers for DL traffic
- * @auto_start: Automatically start (open) this channel
  * @wake-capable: Channel capable of waking up the system
  */
 struct mhi_channel_config {
@@ -232,7 +231,6 @@ struct mhi_channel_config {
 	bool offload_channel;
 	bool doorbell_mode_switch;
 	bool auto_queue;
-	bool auto_start;
 	bool wake_capable;
 };
 
diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
index ff0c414..7100f0b 100644
--- a/net/qrtr/mhi.c
+++ b/net/qrtr/mhi.c
@@ -76,6 +76,11 @@ static int qcom_mhi_qrtr_probe(struct mhi_device *mhi_dev,
 	struct qrtr_mhi_dev *qdev;
 	int rc;
 
+	/* start channels */
+	rc = mhi_prepare_for_transfer(mhi_dev);
+	if (rc)
+		return rc;
+
 	qdev = devm_kzalloc(&mhi_dev->dev, sizeof(*qdev), GFP_KERNEL);
 	if (!qdev)
 		return -ENOMEM;
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux