Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add documentation for LT9611UXC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 09 Sep 09:28 UTC 2020, Dmitry Baryshkov wrote:

> Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports
> and I2S port as input and one HDMI port as output. The LT9611UXC chip is
> handled by a separate driver, but the bindings used are fully compatible
> with the LT9611 chip, so let's reuse the lt9611.yaml schema.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Acked-by: Vinod Koul <vkoul@xxxxxxxxxx>
> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> ---
>  .../devicetree/bindings/display/bridge/lontium,lt9611.yaml   | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> index d60208359234..7a1c89b995e2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> @@ -4,18 +4,19 @@
>  $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Lontium LT9611 2 Port MIPI to HDMI Bridge
> +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
>  
>  maintainers:
>    - Vinod Koul <vkoul@xxxxxxxxxx>
>  
>  description: |
> -  The LT9611 is a bridge device which converts DSI to HDMI
> +  The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
>  
>  properties:
>    compatible:
>      enum:
>        - lontium,lt9611
> +      - lontium,lt9611uxc
>  
>    reg:
>      maxItems: 1
> -- 
> 2.28.0
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux