Just like in commit 50aa72ccb30b ("arm64: dts: qcom: msm8996:
Sort all nodes in msm8996.dtsi"), sort all the nodes by unit address,
then alphabetically by their name.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2540 ++++++++++++-------------
1 file changed, 1270 insertions(+), 1270 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9af528b9979b..aaa21899f1a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,11 +4,11 @@
*/
#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interconnect/qcom,msm8916.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -94,6 +94,20 @@ mba_mem: mba@8ea00000 {
};
};
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -189,6 +203,42 @@ CLUSTER_PWRDN: cluster-gdhs {
};
};
+ cpu_opp_table: cpu-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ opp-998400000 {
+ opp-hz = /bits/ 64 <998400000>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ #reset-cells = <1>;
+
+ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -223,183 +273,114 @@ CLUSTER_PD: power-domain-cluster {
};
};
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- thermal-zones {
- cpu0-1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ smd {
+ compatible = "qcom,smd";
- thermal-sensors = <&tsens 5>;
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
- trips {
- cpu0_1_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu0_1_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
- cooling-maps {
- map0 {
- trip = <&cpu0_1_alert0>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8916";
+ #clock-cells = <1>;
};
};
};
+ };
- cpu2-3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 4>;
+ smem {
+ compatible = "qcom,smem";
- trips {
- cpu2_3_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu2_3_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ memory-region = <&smem_mem>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
- cooling-maps {
- map0 {
- trip = <&cpu2_3_alert0>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
+ hwlocks = <&tcsr_mutex 3>;
+ };
- gpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ smp2p-hexagon {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
- thermal-sensors = <&tsens 2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
- trips {
- gpu_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- gpu_crit: gpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
+ qcom,ipc = <&apcs 8 14>;
- camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
- thermal-sensors = <&tsens 1>;
+ hexagon_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
- trips {
- cam_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ #qcom,smem-state-cells = <1>;
};
- modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 0>;
+ hexagon_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
- trips {
- modem_alert0: trip-point0 {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
-
};
- cpu_opp_table: cpu-opp-table {
- compatible = "operating-points-v2";
- opp-shared;
+ smp2p-wcnss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <451>, <431>;
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- };
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- };
- opp-998400000 {
- opp-hz = /bits/ 64 <998400000>;
- };
- };
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
+ qcom,ipc = <&apcs 8 18>;
- clocks {
- xo_board: xo-board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
};
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
- smem {
- compatible = "qcom,smem";
+ smsm {
+ compatible = "qcom,smsm";
- memory-region = <&smem_mem>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- hwlocks = <&tcsr_mutex 3>;
- };
+ qcom,ipc-1 = <&apcs 8 13>;
+ qcom,ipc-3 = <&apcs 8 19>;
- firmware {
- scm: scm {
- compatible = "qcom,scm-msm8916", "qcom,scm";
- clocks = <&gcc GCC_CRYPTO_CLK>,
- <&gcc GCC_CRYPTO_AXI_CLK>,
- <&gcc GCC_CRYPTO_AHB_CLK>;
- clock-names = "core", "bus", "iface";
- #reset-cells = <1>;
+ apps_smsm: apps@0 {
+ reg = <0>;
- qcom,dload-mode = <&tcsr 0x6100>;
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smsm: hexagon@1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wcnss_smsm: wcnss@6 {
+ reg = <6>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
@@ -409,6 +390,36 @@ soc: soc {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x004ab000 0x4>;
+ };
+
+ qfprom: qfprom@5c000 {
+ compatible = "qcom,qfprom";
+ reg = <0x0005c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ tsens_caldata: caldata@d0 {
+ reg = <0xd0 0x8>;
+ };
+ tsens_calsel: calsel@ec {
+ reg = <0xec 0x4>;
+ };
+ };
+
+ rpm_msg_ram: memory@60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x8000>;
+ };
+
bimc: interconnect@400000 {
compatible = "qcom,msm8916-bimc";
reg = <0x00400000 0x62000>;
@@ -418,9 +429,16 @@ bimc: interconnect@400000 {
<&rpmcc RPM_SMD_BIMC_A_CLK>;
};
- restart@4ab000 {
- compatible = "qcom,pshold";
- reg = <0x004ab000 0x4>;
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "calib", "calib_sel";
+ #qcom,sensors = <5>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
};
pcnoc: interconnect@500000 {
@@ -441,602 +459,429 @@ snoc: interconnect@580000 {
<&rpmcc RPM_SMD_SNOC_A_CLK>;
};
- msmgpio: pinctrl@1000000 {
- compatible = "qcom,msm8916-pinctrl";
- reg = <0x01000000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&msmgpio 0 0 122>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ /* System CTIs */
+ /* CTI 0 - TMC connections */
+ cti0: cti@810000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00810000 0x1000>;
- gcc: clock-controller@1800000 {
- compatible = "qcom,gcc-msm8916";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x01800000 0x80000>;
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- tcsr_mutex: hwlock@1905000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0x01905000 0x20000>;
- #hwlock-cells = <1>;
+ status = "disabled";
};
- tcsr: syscon@1937000 {
- compatible = "qcom,tcsr-msm8916", "syscon";
- reg = <0x01937000 0x30000>;
- };
+ /* CTI 1 - TPIU connections */
+ cti1: cti@811000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00811000 0x1000>;
- rpm_msg_ram: memory@60000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x00060000 0x8000>;
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- blsp1_uart1: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078af000 0x200>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 1>, <&blsp_dma 0>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
status = "disabled";
};
- a53pll: clock@b016000 {
- compatible = "qcom,msm8916-a53pll";
- reg = <0x0b016000 0x40>;
- #clock-cells = <0>;
- };
+ /* CTIs 2-11 - no information - not instantiated */
- apcs: mailbox@b011000 {
- compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
- reg = <0x0b011000 0x1000>;
- #mbox-cells = <1>;
- clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
- clock-names = "pll", "aux";
- #clock-cells = <0>;
- };
+ tpiu: tpiu@820000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x00820000 0x1000>;
- blsp1_uart2: serial@78b0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078b0000 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 3>, <&blsp_dma 2>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- status = "disabled";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- blsp_dma: dma@7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x23000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
status = "disabled";
- };
- blsp_spi1: spi@78b5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b5000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 5>, <&blsp_dma 4>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi1_default>;
- pinctrl-1 = <&spi1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
};
- blsp_spi2: spi@78b6000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 7>, <&blsp_dma 6>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi2_default>;
- pinctrl-1 = <&spi2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ funnel0: funnel@821000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x00821000 0x1000>;
- blsp_spi3: spi@78b7000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b7000 0x500>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 9>, <&blsp_dma 8>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi3_default>;
- pinctrl-1 = <&spi3_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- blsp_spi4: spi@78b8000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 11>, <&blsp_dma 10>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi4_default>;
- pinctrl-1 = <&spi4_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
- };
- blsp_spi5: spi@78b9000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b9000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 13>, <&blsp_dma 12>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi5_default>;
- pinctrl-1 = <&spi5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- blsp_spi6: spi@78ba000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 15>, <&blsp_dma 14>;
- dma-names = "rx", "tx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&spi6_default>;
- pinctrl-1 = <&spi6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ /*
+ * Not described input ports:
+ * 0 - connected to Resource and Power Manger CPU ETM
+ * 1 - not-connected
+ * 2 - connected to Modem CPU ETM
+ * 3 - not-connected
+ * 5 - not-connected
+ * 6 - connected trought funnel to Wireless CPU ETM
+ * 7 - connected to STM component
+ */
- blsp_i2c1: i2c@78b5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b5000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_default>;
- pinctrl-1 = <&i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ port@4 {
+ reg = <4>;
+ funnel0_in4: endpoint {
+ remote-endpoint = <&funnel1_out>;
+ };
+ };
+ };
- blsp_i2c2: i2c@78b6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_default>;
- pinctrl-1 = <&i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ out-ports {
+ port {
+ funnel0_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
};
- blsp_i2c4: i2c@78b8000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c4_default>;
- pinctrl-1 = <&i2c4_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ replicator: replicator@824000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0x00824000 0x1000>;
- blsp_i2c5: i2c@78b9000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b9000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- blsp_i2c6: i2c@78ba000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c6_default>;
- pinctrl-1 = <&i2c6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
- };
- sound: sound@7702000 {
- status = "disabled";
- compatible = "qcom,apq8016-sbc-sndcard";
- reg = <0x07702000 0x4>, <0x07702004 0x4>;
- reg-names = "mic-iomux", "spkr-iomux";
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint = <&etf_out>;
+ };
+ };
+ };
};
- lpass: audio-controller@7708000 {
- status = "disabled";
- compatible = "qcom,lpass-cpu-apq8016";
- clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
- <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
- <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+ etf: etf@825000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00825000 0x1000>;
- clock-names = "ahbix-clk",
- "pcnoc-mport-clk",
- "pcnoc-sway-clk",
- "mi2s-bit-clk0",
- "mi2s-bit-clk1",
- "mi2s-bit-clk2",
- "mi2s-bit-clk3";
- #sound-dai-cells = <1>;
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpass-irq-lpaif";
- reg = <0x07708000 0x10000>;
- reg-names = "lpass-lpaif";
+ status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel0_out>;
+ };
+ };
+ };
- lpass_codec: audio-codec@771c000 {
- compatible = "qcom,msm8916-wcd-digital-codec";
- reg = <0x0771c000 0x400>;
- clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
- <&gcc GCC_CODEC_DIGCODEC_CLK>;
- clock-names = "ahbix-clk", "mclk";
- #sound-dai-cells = <1>;
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
};
- sdhc_1: sdhci@7824000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x07824900 0x11c>, <0x07824000 0x800>;
- reg-names = "hc_mem", "core_mem";
+ etr: etr@826000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00826000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
- mmc-ddr-1_8v;
- bus-width = <8>;
- non-removable;
status = "disabled";
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
};
- sdhc_2: sdhci@7864000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x07864900 0x11c>, <0x07864000 0x800>;
- reg-names = "hc_mem", "core_mem";
+ funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x00841000 0x1000>;
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
- bus-width = <4>;
- status = "disabled";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- usb: usb@78d9000 {
- compatible = "qcom,ci-hdrc";
- reg = <0x078d9000 0x200>,
- <0x078d9200 0x200>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>;
- clock-names = "iface", "core";
- assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
- assigned-clock-rates = <80000000>;
- resets = <&gcc GCC_USB_HS_BCR>;
- reset-names = "core";
- phy_type = "ulpi";
- dr_mode = "otg";
- hnp-disable;
- srp-disable;
- adp-disable;
- ahb-burst-config = <0>;
- phy-names = "usb-phy";
- phys = <&usb_hs_phy>;
status = "disabled";
- #reset-cells = <1>;
- ulpi {
- usb_hs_phy: phy {
- compatible = "qcom,usb-hs-phy-msm8916",
- "qcom,usb-hs-phy";
- #phy-cells = <0>;
- clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
- reset-names = "phy", "por";
- qcom,init-seq = /bits/ 8 <0x0 0x44
- 0x1 0x6b 0x2 0x24 0x3 0x13>;
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel1_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel1_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ funnel1_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ funnel1_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
};
};
- };
- intc: interrupt-controller@b000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ out-ports {
+ port {
+ funnel1_out: endpoint {
+ remote-endpoint = <&funnel0_in4>;
+ };
+ };
+ };
};
- timer@b020000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x0b020000 0x1000>;
- clock-frequency = <19200000>;
+ debug0: debug@850000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00850000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU0>;
+ status = "disabled";
+ };
- frame@b021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b021000 0x1000>,
- <0x0b022000 0x1000>;
- };
+ debug1: debug@852000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00852000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU1>;
+ status = "disabled";
+ };
- frame@b023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b023000 0x1000>;
- status = "disabled";
- };
+ debug2: debug@854000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00854000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU2>;
+ status = "disabled";
+ };
- frame@b024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b024000 0x1000>;
- status = "disabled";
- };
+ debug3: debug@856000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00856000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU3>;
+ status = "disabled";
+ };
- frame@b025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b025000 0x1000>;
- status = "disabled";
- };
+ /* Core CTIs; CTIs 12-15 */
+ /* CTI - CPU-0 */
+ cti12: cti@858000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00858000 0x1000>;
- frame@b026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b026000 0x1000>;
- status = "disabled";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- frame@b027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b027000 0x1000>;
- status = "disabled";
- };
+ cpu = <&CPU0>;
+ arm,cs-dev-assoc = <&etm0>;
- frame@b028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b028000 0x1000>;
- status = "disabled";
- };
+ status = "disabled";
};
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
- <0x02400000 0x400000>,
- <0x02c00000 0x400000>,
- <0x03800000 0x200000>,
- <0x0200a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
+ /* CTI - CPU-1 */
+ cti13: cti@859000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00859000 0x1000>;
- rng@22000 {
- compatible = "qcom,prng";
- reg = <0x00022000 0x200>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- qfprom: qfprom@5c000 {
- compatible = "qcom,qfprom";
- reg = <0x0005c000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- tsens_caldata: caldata@d0 {
- reg = <0xd0 0x8>;
- };
- tsens_calsel: calsel@ec {
- reg = <0xec 0x4>;
- };
- };
+ cpu = <&CPU1>;
+ arm,cs-dev-assoc = <&etm1>;
- tsens: thermal-sensor@4a9000 {
- compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
- nvmem-cell-names = "calib", "calib_sel";
- #qcom,sensors = <5>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
+ status = "disabled";
};
- apps_iommu: iommu@1ef0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #iommu-cells = <1>;
- compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x01e20000 0x40000>;
- reg = <0x01ef0000 0x3000>;
- clocks = <&gcc GCC_SMMU_CFG_CLK>,
- <&gcc GCC_APSS_TCU_CLK>;
- clock-names = "iface", "bus";
- qcom,iommu-secure-id = <17>;
+ /* CTI - CPU-2 */
+ cti14: cti@85a000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085a000 0x1000>;
- // vfe:
- iommu-ctx@3000 {
- compatible = "qcom,msm-iommu-v1-sec";
- reg = <0x3000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- // mdp_0:
- iommu-ctx@4000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x4000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
+ cpu = <&CPU2>;
+ arm,cs-dev-assoc = <&etm2>;
- // venus_ns:
- iommu-ctx@5000 {
- compatible = "qcom,msm-iommu-v1-sec";
- reg = <0x5000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
+ status = "disabled";
};
- gpu_iommu: iommu@1f08000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #iommu-cells = <1>;
- compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x01f08000 0x10000>;
- clocks = <&gcc GCC_SMMU_CFG_CLK>,
- <&gcc GCC_GFX_TCU_CLK>;
- clock-names = "iface", "bus";
- qcom,iommu-secure-id = <18>;
+ /* CTI - CPU-3 */
+ cti15: cti@85b000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085b000 0x1000>;
- // gfx3d_user:
- iommu-ctx@1000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x1000 0x1000>;
- interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+ arm,cs-dev-assoc = <&etm3>;
+
+ status = "disabled";
+ };
+
+ etm0: etm@85c000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU0>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
+ };
};
+ };
- // gfx3d_priv:
- iommu-ctx@2000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x2000 0x1000>;
- interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ etm1: etm@85d000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU1>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
+ };
};
};
- gpu@1c00000 {
- compatible = "qcom,adreno-306.0", "qcom,adreno";
- reg = <0x01c00000 0x20000>;
- reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "kgsl_3d0_irq";
- clock-names =
- "core",
- "iface",
- "mem",
- "mem_iface",
- "alt_mem_iface",
- "gfx3d";
- clocks =
- <&gcc GCC_OXILI_GFX3D_CLK>,
- <&gcc GCC_OXILI_AHB_CLK>,
- <&gcc GCC_OXILI_GMEM_CLK>,
- <&gcc GCC_BIMC_GFX_CLK>,
- <&gcc GCC_BIMC_GPU_CLK>,
- <&gcc GFX3D_CLK_SRC>;
- power-domains = <&gcc OXILI_GDSC>;
- operating-points-v2 = <&gpu_opp_table>;
- iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+ etm2: etm@85e000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085e000 0x1000>;
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
+ cpu = <&CPU2>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
+ };
+ };
+
+ etm3: etm@85f000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU3>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
+ msmgpio: pinctrl@1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 122>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-msm8916";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x01800000 0x80000>;
+ };
+
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-msm8916", "syscon";
+ reg = <0x01937000 0x30000>;
+ };
+
mdss: mdss@1a00000 {
compatible = "qcom,mdss";
reg = <0x01a00000 0x1000>,
@@ -1161,42 +1006,284 @@ dsi_phy0: dsi-phy@1a98300 {
};
};
- mpss: remoteproc@4080000 {
- compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
- reg = <0x04080000 0x100>,
- <0x04020000 0x040>;
-
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "bus", "mem", "xo";
-
- qcom,smem-states = <&hexagon_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- resets = <&scm 0>;
- reset-names = "mss_restart";
-
- qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
-
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&apps_iommu 3>;
status = "disabled";
-
- mba {
- memory-region = <&mba_mem>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
};
+ };
- mpss {
+ cci: cci@1b0c000 {
+ compatible = "qcom,msm8916-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01b0c000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb", "cci_ahb",
+ "cci", "camss_ahb";
+ assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <19200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpu@1c00000 {
+ compatible = "qcom,adreno-306.0", "qcom,adreno";
+ reg = <0x01c00000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core",
+ "iface",
+ "mem",
+ "mem_iface",
+ "alt_mem_iface",
+ "gfx3d";
+ clocks =
+ <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_OXILI_GMEM_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GFX3D_CLK_SRC>;
+ power-domains = <&gcc OXILI_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ };
+ };
+ };
+
+ venus: video-codec@1d00000 {
+ compatible = "qcom,msm8916-venus";
+ reg = <0x01d00000 0xff000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&gcc VENUS_GDSC>;
+ clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+ <&gcc GCC_VENUS0_AHB_CLK>,
+ <&gcc GCC_VENUS0_AXI_CLK>;
+ clock-names = "core", "iface", "bus";
+ iommus = <&apps_iommu 5>;
+ memory-region = <&venus_mem>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
+ apps_iommu: iommu@1ef0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01e20000 0x40000>;
+ reg = <0x01ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <17>;
+
+ // vfe:
+ iommu-ctx@3000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // mdp_0:
+ iommu-ctx@4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // venus_ns:
+ iommu-ctx@5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpu_iommu: iommu@1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <18>;
+
+ // gfx3d_user:
+ iommu-ctx@1000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // gfx3d_priv:
+ iommu-ctx@2000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x400000>,
+ <0x02c00000 0x400000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ mpss: remoteproc@4080000 {
+ compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+ reg = <0x04080000 0x100>,
+ <0x04020000 0x040>;
+
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ qcom,smem-states = <&hexagon_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&scm 0>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
memory-region = <&mpss_mem>;
};
@@ -1225,690 +1312,603 @@ cb@1 {
};
};
- pronto: remoteproc@a21b000 {
- compatible = "qcom,pronto-v2-pil", "qcom,pronto";
- reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
- reg-names = "ccu", "dxe", "pmu";
-
- memory-region = <&wcnss_mem>;
-
- interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- qcom,state = <&wcnss_smp2p_out 0>;
- qcom,state-names = "stop";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcnss_pin_a>;
+ sound: sound@7702000 {
+ status = "disabled";
+ compatible = "qcom,apq8016-sbc-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+ };
+ lpass: audio-controller@7708000 {
status = "disabled";
+ compatible = "qcom,lpass-cpu-apq8016";
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
- iris {
- compatible = "qcom,wcn3620";
+ clock-names = "ahbix-clk",
+ "pcnoc-mport-clk",
+ "pcnoc-sway-clk",
+ "mi2s-bit-clk0",
+ "mi2s-bit-clk1",
+ "mi2s-bit-clk2",
+ "mi2s-bit-clk3";
+ #sound-dai-cells = <1>;
- clocks = <&rpmcc RPM_SMD_RF_CLK2>;
- clock-names = "xo";
- };
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x07708000 0x10000>;
+ reg-names = "lpass-lpaif";
- smd-edge {
- interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- qcom,ipc = <&apcs 8 17>;
- qcom,smd-edge = <6>;
- qcom,remote-pid = <4>;
-
- label = "pronto";
-
- wcnss {
- compatible = "qcom,wcnss";
- qcom,smd-channels = "WCNSS_CTRL";
-
- qcom,mmio = <&pronto>;
-
- bt {
- compatible = "qcom,wcnss-bt";
- };
-
- wifi {
- compatible = "qcom,wcnss-wlan";
-
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
- qcom,smem-state-names = "tx-enable", "tx-rings-empty";
- };
- };
- };
- };
-
- tpiu: tpiu@820000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x00820000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- tpiu_in: endpoint {
- remote-endpoint = <&replicator_out1>;
- };
- };
- };
- };
-
- funnel0: funnel@821000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x00821000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * Not described input ports:
- * 0 - connected to Resource and Power Manger CPU ETM
- * 1 - not-connected
- * 2 - connected to Modem CPU ETM
- * 3 - not-connected
- * 5 - not-connected
- * 6 - connected trought funnel to Wireless CPU ETM
- * 7 - connected to STM component
- */
-
- port@4 {
- reg = <4>;
- funnel0_in4: endpoint {
- remote-endpoint = <&funnel1_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel0_out: endpoint {
- remote-endpoint = <&etf_in>;
- };
- };
- };
+ lpass_codec: audio-codec@771c000 {
+ compatible = "qcom,msm8916-wcd-digital-codec";
+ reg = <0x0771c000 0x400>;
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "ahbix-clk", "mclk";
+ #sound-dai-cells = <1>;
};
- replicator: replicator@824000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x00824000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ sdhc_1: sdhci@7824000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
status = "disabled";
-
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint = <&etr_in>;
- };
- };
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint = <&tpiu_in>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint = <&etf_out>;
- };
- };
- };
};
- etf: etf@825000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x00825000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ sdhc_2: sdhci@7864000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ bus-width = <4>;
status = "disabled";
-
- in-ports {
- port {
- etf_in: endpoint {
- remote-endpoint = <&funnel0_out>;
- };
- };
- };
-
- out-ports {
- port {
- etf_out: endpoint {
- remote-endpoint = <&replicator_in>;
- };
- };
- };
};
- etr: etr@826000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x00826000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
status = "disabled";
-
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint = <&replicator_out0>;
- };
- };
- };
};
- funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x00841000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
status = "disabled";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- funnel1_in0: endpoint {
- remote-endpoint = <&etm0_out>;
- };
- };
- port@1 {
- reg = <1>;
- funnel1_in1: endpoint {
- remote-endpoint = <&etm1_out>;
- };
- };
- port@2 {
- reg = <2>;
- funnel1_in2: endpoint {
- remote-endpoint = <&etm2_out>;
- };
- };
- port@3 {
- reg = <3>;
- funnel1_in3: endpoint {
- remote-endpoint = <&etm3_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel1_out: endpoint {
- remote-endpoint = <&funnel0_in4>;
- };
- };
- };
};
- debug0: debug@850000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00850000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU0>;
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
status = "disabled";
};
- debug1: debug@852000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00852000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU1>;
+ blsp_i2c1: i2c@78b5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_default>;
+ pinctrl-1 = <&i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- debug2: debug@854000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00854000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU2>;
+ blsp_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-1 = <&spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- debug3: debug@856000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00856000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU3>;
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- etm0: etm@85c000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085c000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU0>;
-
+ blsp_spi2: spi@78b6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi2_default>;
+ pinctrl-1 = <&spi2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
-
- out-ports {
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
- };
- };
- };
};
- etm1: etm@85d000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085d000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU1>;
-
+ blsp_spi3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi3_default>;
+ pinctrl-1 = <&spi3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
-
- out-ports {
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
- };
- };
- };
};
- etm2: etm@85e000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085e000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU2>;
-
+ blsp_i2c4: i2c@78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-1 = <&i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
-
- out-ports {
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
- };
- };
- };
};
- etm3: etm@85f000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085f000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU3>;
-
+ blsp_spi4: spi@78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi4_default>;
+ pinctrl-1 = <&spi4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
-
- out-ports {
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
- };
- };
- };
};
- /* System CTIs */
- /* CTI 0 - TMC connections */
- cti0: cti@810000 {
- compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x00810000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
+ blsp_i2c5: i2c@78b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_default>;
+ pinctrl-1 = <&i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- /* CTI 1 - TPIU connections */
- cti1: cti@811000 {
- compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x00811000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
+ blsp_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 13>, <&blsp_dma 12>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi5_default>;
+ pinctrl-1 = <&spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- /* CTIs 2-11 - no information - not instantiated */
-
- /* Core CTIs; CTIs 12-15 */
- /* CTI - CPU-0 */
- cti12: cti@858000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x00858000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU0>;
- arm,cs-dev-assoc = <&etm0>;
-
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- /* CTI - CPU-1 */
- cti13: cti@859000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x00859000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU1>;
- arm,cs-dev-assoc = <&etm1>;
-
+ blsp_spi6: spi@78ba000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi6_default>;
+ pinctrl-1 = <&spi6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- /* CTI - CPU-2 */
- cti14: cti@85a000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x0085a000 0x1000>;
+ usb: usb@78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x078d9000 0x200>,
+ <0x078d9200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
+ status = "disabled";
+ #reset-cells = <1>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44
+ 0x1 0x6b 0x2 0x24 0x3 0x13>;
+ };
+ };
+ };
- cpu = <&CPU2>;
- arm,cs-dev-assoc = <&etm2>;
+ pronto: remoteproc@a21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
- status = "disabled";
- };
+ memory-region = <&wcnss_mem>;
- /* CTI - CPU-3 */
- cti15: cti@85b000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x0085b000 0x1000>;
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
+ qcom,state = <&wcnss_smp2p_out 0>;
+ qcom,state-names = "stop";
- cpu = <&CPU3>;
- arm,cs-dev-assoc = <&etm3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
status = "disabled";
- };
- venus: video-codec@1d00000 {
- compatible = "qcom,msm8916-venus";
- reg = <0x01d00000 0xff000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&gcc VENUS_GDSC>;
- clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
- <&gcc GCC_VENUS0_AHB_CLK>,
- <&gcc GCC_VENUS0_AXI_CLK>;
- clock-names = "core", "iface", "bus";
- iommus = <&apps_iommu 5>;
- memory-region = <&venus_mem>;
- status = "okay";
+ iris {
+ compatible = "qcom,wcn3620";
- video-decoder {
- compatible = "venus-decoder";
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
};
- video-encoder {
- compatible = "venus-encoder";
- };
- };
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
- camss: camss@1b00000 {
- compatible = "qcom,msm8916-camss";
- reg = <0x01b0ac00 0x200>,
- <0x01b00030 0x4>,
- <0x01b0b000 0x200>,
- <0x01b00038 0x4>,
- <0x01b08000 0x100>,
- <0x01b08400 0x100>,
- <0x01b0a000 0x500>,
- <0x01b00020 0x10>,
- <0x01b10000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csid0",
- "csid1",
- "ispif",
- "csi_clk_mux",
- "vfe0";
- interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csid0",
- "csid1",
- "ispif",
- "vfe0";
- power-domains = <&gcc VFE_GDSC>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0_CLK>,
- <&gcc GCC_CAMSS_CSI0PHY_CLK>,
- <&gcc GCC_CAMSS_CSI0PIX_CLK>,
- <&gcc GCC_CAMSS_CSI0RDI_CLK>,
- <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI1_CLK>,
- <&gcc GCC_CAMSS_CSI1PHY_CLK>,
- <&gcc GCC_CAMSS_CSI1PIX_CLK>,
- <&gcc GCC_CAMSS_CSI1RDI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE0_CLK>,
- <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
- <&gcc GCC_CAMSS_VFE_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe_ahb",
- "vfe_axi";
- iommus = <&apps_iommu 3>;
- status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
- cci: cci@1b0c000 {
- compatible = "qcom,msm8916-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x01b0c000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>;
- clock-names = "camss_top_ahb", "cci_ahb",
- "cci", "camss_ahb";
- assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_CLK>;
- assigned-clock-rates = <80000000>, <19200000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cci0_default>;
- status = "disabled";
+ label = "pronto";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
+ qcom,mmio = <&pronto>;
- smd {
- compatible = "qcom,smd";
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
+ wifi {
+ compatible = "qcom,wcnss-wlan";
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8916";
- qcom,smd-channels = "rpm_requests";
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8916";
- #clock-cells = <1>;
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
};
};
};
- };
- smp2p-hexagon {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ };
- interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+ apcs: mailbox@b011000 {
+ compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+ reg = <0x0b011000 0x1000>;
+ #mbox-cells = <1>;
+ clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+ clock-names = "pll", "aux";
+ #clock-cells = <0>;
+ };
- qcom,ipc = <&apcs 8 14>;
+ a53pll: clock@b016000 {
+ compatible = "qcom,msm8916-a53pll";
+ reg = <0x0b016000 0x40>;
+ #clock-cells = <0>;
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
+ timer@b020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b020000 0x1000>;
+ clock-frequency = <19200000>;
- hexagon_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
+ frame@b021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b021000 0x1000>,
+ <0x0b022000 0x1000>;
+ };
- #qcom,smem-state-cells = <1>;
- };
+ frame@b023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b023000 0x1000>;
+ status = "disabled";
+ };
- hexagon_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
+ frame@b024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b024000 0x1000>;
+ status = "disabled";
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ frame@b025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b028000 0x1000>;
+ status = "disabled";
+ };
};
};
- smp2p-wcnss {
- compatible = "qcom,smp2p";
- qcom,smem = <451>, <431>;
+ thermal-zones {
+ cpu0-1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens 5>;
- qcom,ipc = <&apcs 8 18>;
+ trips {
+ cpu0_1_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <4>;
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
- wcnss_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
+ cpu2-3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- #qcom,smem-state-cells = <1>;
- };
+ thermal-sensors = <&tsens 4>;
- wcnss_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
+ trips {
+ cpu2_3_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
- };
- smsm {
- compatible = "qcom,smsm";
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- #address-cells = <1>;
- #size-cells = <0>;
+ thermal-sensors = <&tsens 2>;
- qcom,ipc-1 = <&apcs 8 13>;
- qcom,ipc-3 = <&apcs 8 19>;
+ trips {
+ gpu_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
- apps_smsm: apps@0 {
- reg = <0>;
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- #qcom,smem-state-cells = <1>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cam_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- hexagon_smsm: hexagon@1 {
- reg = <1>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ modem_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- wcnss_smsm: wcnss@6 {
- reg = <6>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
--
2.28.0
