&dsi0 -> ports -> port@1 -> endpoint already has the "dsi0_out" label,
so we can use it for configuring instead of replicating the entire
node hierarchy. Looks like I missed that when converting the boards.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 +++---------
arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 12 ++++--------
2 files changed, 7 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index d9af1a3785d8..3c7f97539390 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -292,15 +292,9 @@ ov5640_ep: endpoint {
};
};
-&dsi0 {
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&adv7533_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&adv7533_in>;
};
&lpass {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 410c7d199f96..086f07ead5cb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -44,15 +44,11 @@ panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- dsi0_out: endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1>;
- };
- };
- };
+&dsi0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&panel_in>;
};
&msmgpio {
--
2.28.0
