Re: [PATCH] soc: qcom: pdr: Fixup array type of get_domain_list_resp message

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-09-14 07:58, Sibi Sankar wrote:
The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY. Due to which the following error was observed when using pdr helpers with
the downstream proprietary pd-mapper. Fix this up by marking it as
VAR_LEN_ARRAY instead.

Err logs:
qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1)
failed to decode incoming message
PDR: tms/servreg get domain list txn wait failed: -14
PDR: service lookup for tms/servreg failed: -14

Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Rishabh Bhatnagar <rishabhb@xxxxxxxxxxxxxx>
Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
 drivers/soc/qcom/pdr_internal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/pdr_internal.h b/drivers/soc/qcom/pdr_internal.h
index 15b5002e4127b..ab9ae8cdfa54c 100644
--- a/drivers/soc/qcom/pdr_internal.h
+++ b/drivers/soc/qcom/pdr_internal.h
@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = {
 		.data_type      = QMI_STRUCT,
 		.elem_len       = SERVREG_DOMAIN_LIST_LENGTH,
 		.elem_size      = sizeof(struct servreg_location_entry),
-		.array_type	= NO_ARRAY,
+		.array_type	= VAR_LEN_ARRAY,
 		.tlv_type       = 0x12,
 		.offset         = offsetof(struct servreg_get_domain_list_resp,
 					   domain_list),
Tested-by: Rishabh Bhatnagar <rishabhb@xxxxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux