[PATCH V5 0/4] Add wakeup support over UART RX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changes in V2:
 - As per Matthias's comment added wakeup support for all the UARTs
   of SC7180.
 - Added sleep state in sc7180-idp.dts file.
 - Modify the if check in set_mctrl API in serial driver to avoid
   making RFR high during suspend.

Changes in V3:
 - As per Matthias's comments modify the idp dts pin config to keep
   only the required pin settings.
 - Remove the extra parentheses from serial driver patch.

Changes in V4:
 - As per Matthias's comments, change the commit text to mention why
   GPIO function needs to be selected in sleep.
 - Add separate patch for improvements made in pin conf settings.

Changes in V5:
 - Moved pinctrl and interrupt configuration to board specific files.
 - Added new patch for trogdor board specific changes.

satya priya (4):
  arm64: dts: qcom: sc7180: Improve the pin config settings for CTS and
    TX
  arm64: dts: qcom: sc7180: Add necessary pinctrl and interrupt config
    for BT UART
  arm64: dts: qcom: sc7180-trogdor: Add pinctrl and interrupt config for
    BT UART
  tty: serial: qcom_geni_serial: Fix the UART wakeup issue

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 58 +++++++++++++++++++++++++---
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 48 +++++++++++++++++++++++
 drivers/tty/serial/qcom_geni_serial.c        |  2 +-
 3 files changed, 101 insertions(+), 7 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux