[PATCH 1/4] arm: dts: qcom: ipq4019: add more labels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Lets add labels to more commonly used nodes for easier modification in board DTS files.

Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
Cc: Luka Perkov <luka.perkov@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 3d056aada8d1..7bf1da916f25 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -190,7 +190,7 @@ gcc: clock-controller@1800000 {
 			reg = <0x1800000 0x60000>;
 		};
 
-		rng@22000 {
+		prng: rng@22000 {
 			compatible = "qcom,prng";
 			reg = <0x22000 0x140>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
@@ -310,7 +310,7 @@ cryptobam: dma@8e04000 {
 			status = "disabled";
 		};
 
-		crypto@8e3a000 {
+		crypto: crypto@8e3a000 {
 			compatible = "qcom,crypto-v5.1";
 			reg = <0x08e3a000 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
@@ -396,7 +396,7 @@ blsp1_uart2: serial@78b0000 {
 			dma-names = "rx", "tx";
 		};
 
-		watchdog@b017000 {
+		watchdog: watchdog@b017000 {
 			compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
 			reg = <0xb017000 0x40>;
 			clocks = <&sleep_clk>;
-- 
2.26.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux