Currently sm8250.dtsi only defines default debug uart. Port rest uart
nodes from the downstream dtsi file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 74 ++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e5525df69946..552fa3df9e4f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -551,6 +551,17 @@ spi17: spi@88c000 {
status = "disabled";
};
+ uart17: serial@88c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart17_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c18: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
@@ -577,6 +588,17 @@ spi18: spi@890000 {
status = "disabled";
};
+ uart18: serial@890000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart18_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c19: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
@@ -693,6 +715,17 @@ spi2: spi@988000 {
status = "disabled";
};
+ uart2: serial@988000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c3: i2c@98c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0098c000 0 0x4000>;
@@ -797,6 +830,17 @@ spi6: spi@998000 {
status = "disabled";
};
+ uart6: serial@998000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00998000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c7: i2c@99c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0099c000 0 0x4000>;
@@ -2410,6 +2454,21 @@ config {
};
};
+ qup_uart2_default: qup-uart2-default {
+ mux {
+ pins = "gpio117", "gpio118";
+ function = "qup2";
+ };
+ };
+
+ qup_uart6_default: qup-uart6-default {
+ mux {
+ pins = "gpio16", "gpio17",
+ "gpio18", "gpio19";
+ function = "qup6";
+ };
+ };
+
qup_uart12_default: qup-uart12-default {
mux {
pins = "gpio34", "gpio35";
@@ -2417,6 +2476,21 @@ mux {
};
};
+ qup_uart17_default: qup-uart17-default {
+ mux {
+ pins = "gpio52", "gpio53",
+ "gpio54", "gpio55";
+ function = "qup17";
+ };
+ };
+
+ qup_uart18_default: qup-uart18-default {
+ mux {
+ pins = "gpio58", "gpio59";
+ function = "qup18";
+ };
+ };
+
pri_mi2s_sck_active: pri-mi2s-sck-active {
mux {
pins = "gpio138";
--
2.28.0
