Re: [PATCH v2 2/2] venus: firmware: Set virtual address ranges

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 17 Aug 03:27 CDT 2020, Stanimir Varbanov wrote:

> In order to boot some of the new Venus firmware versions TZ call to set
> virtual address ranges is needed. Add virtual address ranges for CP and
> CP_NONPIX in resource structure and use them when loading and booting
> the firmware on remote processor.
> 
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
> ---
>  drivers/media/platform/qcom/venus/core.c     |  4 ++++
>  drivers/media/platform/qcom/venus/core.h     |  4 ++++
>  drivers/media/platform/qcom/venus/firmware.c | 18 +++++++++++++++++-
>  3 files changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 203c6538044f..5f8f7b72731c 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -527,6 +527,10 @@ static const struct venus_resources sdm845_res_v2 = {
>  	.vmem_size = 0,
>  	.vmem_addr = 0,
>  	.dma_mask = 0xe0000000 - 1,
> +	.cp_start = 0,
> +	.cp_size = 0x70800000,
> +	.cp_nonpixel_start = 0x1000000,
> +	.cp_nonpixel_size = 0x24800000,
>  	.fwname = "qcom/venus-5.2/venus.mdt",
>  };
>  
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 7118612673c9..8c88516e4694 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -68,6 +68,10 @@ struct venus_resources {
>  	unsigned int vmem_id;
>  	u32 vmem_size;
>  	u32 vmem_addr;
> +	u32 cp_start;
> +	u32 cp_size;
> +	u32 cp_nonpixel_start;
> +	u32 cp_nonpixel_size;
>  	const char *fwname;
>  };
>  
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 8801a6a7543d..ac906ffc608f 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -181,6 +181,7 @@ static int venus_shutdown_no_tz(struct venus_core *core)
>  int venus_boot(struct venus_core *core)
>  {
>  	struct device *dev = core->dev;
> +	const struct venus_resources *res = core->res;
>  	phys_addr_t mem_phys;
>  	size_t mem_size;
>  	int ret;
> @@ -200,7 +201,22 @@ int venus_boot(struct venus_core *core)
>  	else
>  		ret = venus_boot_no_tz(core, mem_phys, mem_size);
>  
> -	return ret;
> +	if (ret)
> +		return ret;
> +
> +	if (core->use_tz && res->cp_size) {
> +		ret = qcom_scm_mem_protect_video_var(res->cp_start,
> +						     res->cp_size,
> +						     res->cp_nonpixel_start,
> +						     res->cp_nonpixel_size);
> +		if (ret) {
> +			dev_err(dev, "set virtual address ranges fail (%d)\n",
> +				ret);
> +			return ret;

Afaict venus_probe() will tear down clocks and power of the now running
Venus core when you return an error here. Isn't it necessary to stop the
core here as well?

Regards,
Bjorn

> +		}
> +	}
> +
> +	return 0;
>  }
>  
>  int venus_shutdown(struct venus_core *core)
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux