Re: [PATCH 5/7] cpufreq: qcom-hw: Use regmap for accessing hardware registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 08, 2020 at 05:18:35PM +0530, Amit Kucheria wrote:
> On Tue, Sep 8, 2020 at 4:48 PM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
> >
> > On 08-09-20, 16:41, Manivannan Sadhasivam wrote:
> > > On 0908, Viresh Kumar wrote:
> > > > On 08-09-20, 13:27, Manivannan Sadhasivam wrote:
> > > > > Use regmap for accessing cpufreq registers in hardware.
> > > >
> > > > Why ? Please mention why a change is required in the log.
> > > >
> > >
> > > Only because it is recommended to use regmap for abstracting the hw access.
> >
> > Yes it can be very useful in abstracting the hw access in case of
> > busses like SPI/I2C, others, but in this case there is only one way of
> > doing it with the exact same registers. I am not sure it is worth it
> > here. FWIW, I have never played with regmaps personally, and so every
> > chance I can be wrong here.
> 
> One could handle the reg offsets through a struct initialisation, but
> then you end up with lots of #defines for bitmasks and bits for each
> version of the IP. And the core code becomes a bit convoluted IMO,
> trying to handle the differences.
> 
> regmap hides the differences of the bit positions and register offsets
> between several IP versions.
> 
> > > Moreover it handles the proper locking for us in the core (spinlock vs mutex).
> >
> > What locking do you need here ?
> 
> Right, locking isn't the main reason here.

If that is the case, IMO it is better to set disable_lock or something
in config especially as this regmap_write is used in qcom_cpufreq_hw_fast_switch

-- 
Regards,
Sudeep



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux