Add the necessary compatible strings and phy data for the sc7180 USB3+DP combo phy. Cc: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx> Cc: Chandan Uddaraju <chandanu@xxxxxxxxxxxxxx> Cc: Vara Reddy <varar@xxxxxxxxxxxxxx> Cc: Tanmay Shah <tanmay@xxxxxxxxxxxxxx> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Cc: Manu Gautam <mgautam@xxxxxxxxxxxxxx> Cc: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> Cc: Sean Paul <seanpaul@xxxxxxxxxxxx> Cc: Jonathan Marek <jonathan@xxxxxxxx> Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Cc: Rob Clark <robdclark@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@xxxxxxxxxxxxxx Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index dd77c7dfa310..84fba3437a20 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1071,6 +1071,24 @@ static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = { QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), }; +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07), +}; + static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), @@ -2337,6 +2355,28 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { .is_dual_lane_phy = true, }; +static const struct qmp_phy_cfg sc7180_dpphy_cfg = { + .type = PHY_TYPE_DP, + .nlanes = 1, + + .tx_tbl = qmp_v3_dp_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl), + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = sc7180_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + + .has_phy_dp_com_ctrl = true, + .is_dual_lane_phy = true, +}; + +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = { + .usb_cfg = &sc7180_usb3phy_cfg, + .dp_cfg = &sc7180_dpphy_cfg, +}; + static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -3891,6 +3931,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sc7180-qmp-usb3-phy", .data = &sc7180_usb3phy_cfg, + }, { + .compatible = "qcom,sc7180-qmp-usb3-dp-phy", + /* It's a combo phy */ }, { .compatible = "qcom,sdm845-qhp-pcie-phy", .data = &sdm845_qhp_pciephy_cfg, @@ -3933,6 +3976,10 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = { + { + .compatible = "qcom,sc7180-qmp-usb3-dp-phy", + .data = &sc7180_usb3dpphy_cfg, + }, { } }; -- Sent by a computer, using git, on the internet
