[PATCH AUTOSEL 4.14 04/30] arm64: dts: qcom: msm8916: Pull down PDM GPIOs during sleep

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Stephan Gerhold <stephan@xxxxxxxxxxx>

[ Upstream commit e2ee9edc282961783d519c760bbaa20fed4dec38 ]

The original qcom kernel changed the PDM GPIOs to be pull-down
during sleep at some point. Reportedly this was done because
there was some "leakage at PDM outputs during sleep":

  https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0

I cannot say how effective this is, but everything seems to work
fine with this change so let's apply the same to mainline just
to be sure.

Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@xxxxxxxxxxx
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 4cb0b58341432..0264b6769746c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -555,7 +555,7 @@ pinconf {
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <2>;
-				bias-disable;
+				bias-pull-down;
 			};
 		};
 	};
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux