Re: [PATCH 2/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-08-19 09:13, Stephen Boyd wrote:
Quoting Roja Rani Yarubandi (2020-08-14 02:55:40)
If the hardware is still accessing memory after SMMU translation
is disabled(as part of smmu shutdown callback), then the

Put a space before (


Ok.

IOVAs(I/O virtual address) which it was using will go on the bus

Put a space before (

as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.

So, adding shutdown callback to i2c driver to unmap DMA mappings
during system "reboot" or "shutdown".


Deserves a Fixes: tag if it's fixing a problem, which it looks like it
is.


It is not fixing a problem. We are anticipating a problem and implementing
Shutdown callback.

Signed-off-by: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-qcom-geni.c | 36 ++++++++++++++++++++++++++++++
 include/linux/qcom-geni-se.h       |  5 +++++

I'd prefer this is squashed with the previous patch. The first patch
doesn't really stand on its own anyway.


Sorry, I did not understand.
First patch can be compiled independently.

 2 files changed, 41 insertions(+)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 53ca41f76080..749c225f95c4 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -613,6 +613,41 @@ static int geni_i2c_remove(struct platform_device *pdev)
        return 0;
 }

+static void geni_i2c_shutdown(struct platform_device *pdev)
+{
+       int ret;
+       struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
+       struct geni_se *se = &gi2c->se;
+       u32 dma;
+       u32 dma_dbg_reg;

Typically this is just called 'val'.


Ok.

+
+       ret = pm_runtime_get_sync(gi2c->se.dev);
+       if (ret < 0) {
+ dev_err(gi2c->se.dev, "Failed to resume device:%d\n", ret);

Maybe just write: "Failed to resume device\n"? Not sure anyone cares
what the error code is. And if they did, it would be connected to the
colon so it will be hard to read. Add a space after colon if you want to
keep the return value please.


Ok, will add space after colon.

+               return;
+       }
+
+       dma = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
+       if (dma) {
+ dma_dbg_reg = readl_relaxed(gi2c->se.base + SE_DMA_DEBUG_REG0);
+               if (dma_dbg_reg & DMA_TX_ACTIVE) {
+                       geni_i2c_abort_xfer(gi2c);
+                       gi2c->cur_wr = 0;
+                       if (gi2c->err)
+                               geni_i2c_tx_fsm_rst(gi2c);
+ geni_se_tx_dma_unprep(se, gi2c->tx_dma, gi2c->xfer_len);
+               }
+               if (dma_dbg_reg & DMA_RX_ACTIVE) {
+                       geni_i2c_abort_xfer(gi2c);
+                       gi2c->cur_rd = 0;
+                       if (gi2c->err)
+                               geni_i2c_rx_fsm_rst(gi2c);
+ geni_se_rx_dma_unprep(se, gi2c->rx_dma, gi2c->xfer_len);
+               }

Can this be a function? It sort of seems like we should be doing the
same sort of stuff if we're canceling a DMA transaction in flight.


Ok. Will make the changes.

+       }
+       pm_runtime_put_sync_suspend(gi2c->se.dev);
+}
+
static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 {
        int ret;
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index dd464943f717..acad69be747d 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -77,6 +77,7 @@ struct geni_se {
 #define SE_DMA_RX_FSM_RST              0xd58
 #define SE_HW_PARAM_0                  0xe24
 #define SE_HW_PARAM_1                  0xe28
+#define SE_DMA_DEBUG_REG0              0xe40

 /* GENI_FORCE_DEFAULT_REG fields */
 #define FORCE_DEFAULT  BIT(0)
@@ -207,6 +208,10 @@ struct geni_se {
 #define RX_GENI_CANCEL_IRQ             BIT(11)
 #define RX_GENI_GP_IRQ_EXT             GENMASK(13, 12)

+/* DMA DEBUG Register fields */

Please follow other style, ie. SE_DMA_DEBUG_REG0 fields


Ok.

+#define DMA_TX_ACTIVE                  BIT(0)
+#define DMA_RX_ACTIVE                  BIT(1)
+
 /* SE_HW_PARAM_0 fields */
 #define TX_FIFO_WIDTH_MSK              GENMASK(29, 24)
 #define TX_FIFO_WIDTH_SHFT             24



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux