Re: [PATCH v10 3/5] drm/msm/dp: add support for DP PLL driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/08/2020 07:42, Tanmay Shah wrote:
> From: Chandan Uddaraju <chandanu@xxxxxxxxxxxxxx>
>
> Add the needed DP PLL specific files to support
> display port interface on msm targets.

[skipped]

> diff --git a/drivers/gpu/drm/msm/dp/dp_pll_private.h b/drivers/gpu/drm/msm/dp/dp_pll_private.h
> new file mode 100644
> index 000000000000..475ba6ed59ab
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dp/dp_pll_private.h
> @@ -0,0 +1,98 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2016-2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __DP_PLL_10NM_H
> +#define __DP_PLL_10NM_H
> +
> +#include "dp_pll.h"
> +#include "dp_reg.h"
> +
> +#define DP_VCO_HSCLK_RATE_1620MHZDIV1000    1620000UL
> +#define DP_VCO_HSCLK_RATE_2700MHZDIV1000    2700000UL
> +#define DP_VCO_HSCLK_RATE_5400MHZDIV1000    5400000UL
> +#define DP_VCO_HSCLK_RATE_8100MHZDIV1000    8100000UL
> +
> +#define NUM_DP_CLOCKS_MAX            6
> +
> +#define DP_PHY_PLL_POLL_SLEEP_US        500
> +#define DP_PHY_PLL_POLL_TIMEOUT_US        10000
> +
> +#define DP_VCO_RATE_8100MHZDIV1000        8100000UL
> +#define DP_VCO_RATE_9720MHZDIV1000        9720000UL
> +#define DP_VCO_RATE_10800MHZDIV1000        10800000UL
> +
> +struct dp_pll_vco_clk {
> +    struct clk_hw hw;
> +    unsigned long    rate;        /* current vco rate */
> +    u64        min_rate;    /* min vco rate */
> +    u64        max_rate;    /* max vco rate */
> +    void        *priv;
> +};
> +
> +struct dp_pll_db {

This struct should probably go into dp_pll_10nm.c. dp_pll_7nm.c, for example, will use slightly different structure.

> +    struct msm_dp_pll *base;
> +
> +    int id;
> +    struct platform_device *pdev;
> +
> +    /* private clocks: */
> +    bool fixed_factor_clk[NUM_DP_CLOCKS_MAX];
> +    struct clk_hw *hws[NUM_DP_CLOCKS_MAX];

Then these two fields can use exact number of clocks rather than NUM_DP_CLOCKS_MAX.

> +    u32 num_hws;
> +
> +    /* lane and orientation settings */
> +    u8 lane_cnt;
> +    u8 orientation;
> +
> +    /* COM PHY settings */
> +    u32 hsclk_sel;
> +    u32 dec_start_mode0;
> +    u32 div_frac_start1_mode0;
> +    u32 div_frac_start2_mode0;
> +    u32 div_frac_start3_mode0;
> +    u32 integloop_gain0_mode0;
> +    u32 integloop_gain1_mode0;
> +    u32 vco_tune_map;
> +    u32 lock_cmp1_mode0;
> +    u32 lock_cmp2_mode0;
> +    u32 lock_cmp3_mode0;
> +    u32 lock_cmp_en;
> +
> +    /* PHY vco divider */
> +    u32 phy_vco_div;
> +    /*
> +     * Certain pll's needs to update the same vco rate after resume in
> +     * suspend/resume scenario. Cached the vco rate for such plls.
> +     */
> +    unsigned long    vco_cached_rate;
> +    u32        cached_cfg0;
> +    u32        cached_cfg1;
> +    u32        cached_outdiv;
> +
> +    uint32_t index;
> +};
> +
> +static inline struct dp_pll_vco_clk *to_dp_vco_hw(struct clk_hw *hw)
> +{
> +    return container_of(hw, struct dp_pll_vco_clk, hw);
> +}
> +
> +#define to_msm_dp_pll(vco) ((struct msm_dp_pll *)vco->priv)
> +
> +#define to_dp_pll_db(x)    ((struct dp_pll_db *)x->priv)
> +
> +int dp_vco_set_rate_10nm(struct clk_hw *hw, unsigned long rate,
> +                unsigned long parent_rate);
> +unsigned long dp_vco_recalc_rate_10nm(struct clk_hw *hw,
> +                unsigned long parent_rate);
> +long dp_vco_round_rate_10nm(struct clk_hw *hw, unsigned long rate,
> +                unsigned long *parent_rate);
> +int dp_vco_prepare_10nm(struct clk_hw *hw);
> +void dp_vco_unprepare_10nm(struct clk_hw *hw);
> +
> +int msm_dp_pll_10nm_init(struct msm_dp_pll *dp_pll, int id);
> +void msm_dp_pll_10nm_deinit(struct msm_dp_pll *dp_pll);

These functions don't seem to be used outside of dp_pll_10nm. What about making them static?


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux