Hi,
On 6/11/2020 7:58 PM, Sandeep Maheswaram wrote:
> Avoiding phy powerdown in host mode so that it can be wake up by devices.
> Set usb controller wakeup capable when wakeup capable devices are
> connected to the host.
>
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
> drivers/usb/dwc3/core.c | 47 ++++++++++++++++++++++++++-----
> drivers/usb/dwc3/core.h | 1 +
> drivers/usb/dwc3/dwc3-qcom.c | 66 +++++++++++++++++++++++++++++++++-----------
> 3 files changed, 91 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 25c686a7..8370350 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -31,15 +31,19 @@
> #include <linux/usb/gadget.h>
> #include <linux/usb/of.h>
> #include <linux/usb/otg.h>
> +#include <linux/usb/hcd.h>
>
> #include "core.h"
> #include "gadget.h"
> #include "io.h"
>
> #include "debug.h"
> +#include "../host/xhci.h"
>
> #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */
>
> +bool need_phy_for_wakeup;
> +
> /**
> * dwc3_get_dr_mode - Validates and sets dr_mode
> * @dwc: pointer to our context structure
> @@ -1627,10 +1631,36 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
> return ret;
> }
>
> +static void dwc3_set_phy_speed_flags(struct dwc3 *dwc)
> +{
> +
> + int i, num_ports;
> + u32 reg;
> + struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci);
dwc->xhci could be NULL for DR_MODE = PERIPHERAL.
> + struct xhci_hcd *xhci_hcd = hcd_to_xhci(hcd);
> +
> + dwc->hs_phy_flags &= ~(PHY_MODE_USB_HOST_HS | PHY_MODE_USB_HOST_LS);
> +
> + reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> +
> + num_ports = HCS_MAX_PORTS(reg);
> + for (i = 0; i < num_ports; i++) {
> + reg = readl(&xhci_hcd->op_regs->port_status_base + i*0x10);
> + if (reg & PORT_PE) {
> + if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
> + dwc->hs_phy_flags |= PHY_MODE_USB_HOST_HS;
> + else if (DEV_LOWSPEED(reg))
> + dwc->hs_phy_flags |= PHY_MODE_USB_HOST_LS;
> + }
> + }
> + phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_flags);
Can we move this logic to xhci driver instead?
> +}
> +
..
> @@ -240,6 +267,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
> {
> u32 val;
> int i;
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> + struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci);
dwc->xhci could be NULL
> +
> + if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
> + device_init_wakeup(qcom->dev, 1);
>
> if (qcom->is_suspended)
> return 0;
> @@ -262,6 +294,8 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
> int ret;
> int i;
>
> + device_init_wakeup(qcom->dev, 0);
> +
> if (!qcom->is_suspended)
> return 0;
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
