[PATCH AUTOSEL 5.8 27/64] drm: msm: a6xx: fix gpu failure after system resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxx>

[ Upstream commit 57c0bd517c06b088106b0236ed604056c8e06da5 ]

On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, move the refcount-get on GX PD before we
initialize the GMU. This ensures that nobody can collapse the GX GDSC
once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
during GPU wake up during a system resume.

Reported-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Signed-off-by: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxx>
Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Reviewed-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 21e77d67151f5..1d330204c465c 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -854,10 +854,19 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	/* Turn on the resources */
 	pm_runtime_get_sync(gmu->dev);
 
+	/*
+	 * "enable" the GX power domain which won't actually do anything but it
+	 * will make sure that the refcounting is correct in case we need to
+	 * bring down the GX after a GMU failure
+	 */
+	if (!IS_ERR_OR_NULL(gmu->gxpd))
+		pm_runtime_get_sync(gmu->gxpd);
+
 	/* Use a known rate to bring up the GMU */
 	clk_set_rate(gmu->core_clk, 200000000);
 	ret = clk_bulk_prepare_enable(gmu->nr_clocks, gmu->clocks);
 	if (ret) {
+		pm_runtime_put(gmu->gxpd);
 		pm_runtime_put(gmu->dev);
 		return ret;
 	}
@@ -903,19 +912,12 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	else
 		a6xx_hfi_set_freq(gmu, gmu->current_perf_index);
 
-	/*
-	 * "enable" the GX power domain which won't actually do anything but it
-	 * will make sure that the refcounting is correct in case we need to
-	 * bring down the GX after a GMU failure
-	 */
-	if (!IS_ERR_OR_NULL(gmu->gxpd))
-		pm_runtime_get(gmu->gxpd);
-
 out:
 	/* On failure, shut down the GMU to leave it in a good state */
 	if (ret) {
 		disable_irq(gmu->gmu_irq);
 		a6xx_rpmh_stop(gmu);
+		pm_runtime_put(gmu->gxpd);
 		pm_runtime_put(gmu->dev);
 	}
 
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux