On 2020-08-06 02:24, John Stultz wrote:
On Wed, Aug 5, 2020 at 1:19 PM Saravana Kannan <saravanak@xxxxxxxxxx>
wrote:
On Wed, Aug 5, 2020 at 12:44 AM John Stultz <john.stultz@xxxxxxxxxx>
wrote:
> On Fri, Jul 17, 2020 at 5:06 PM Saravana Kannan <saravanak@xxxxxxxxxx> wrote:
> >
> > Switch the driver to use the helper macros. In addition to reducing the
> > number of lines, this also adds module unload protection (if the driver
> > is compiled as a module) by switching from module_platform_driver to
> > builtin_platform_driver.
> >
> > Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> > ---
> > drivers/irqchip/qcom-pdc.c | 26 +++-----------------------
> > 1 file changed, 3 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
> > index 5b624e3295e4..c1c5dfad57cc 100644
> > --- a/drivers/irqchip/qcom-pdc.c
> > +++ b/drivers/irqchip/qcom-pdc.c
> > @@ -432,28 +432,8 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
> > return ret;
> > }
> >
> > -static int qcom_pdc_probe(struct platform_device *pdev)
> > -{
> > - struct device_node *np = pdev->dev.of_node;
> > - struct device_node *parent = of_irq_find_parent(np);
> > -
> > - return qcom_pdc_init(np, parent);
> > -}
> > -
> > -static const struct of_device_id qcom_pdc_match_table[] = {
> > - { .compatible = "qcom,pdc" },
> > - {}
> > -};
> > -MODULE_DEVICE_TABLE(of, qcom_pdc_match_table);
> > -
> > -static struct platform_driver qcom_pdc_driver = {
> > - .probe = qcom_pdc_probe,
> > - .driver = {
> > - .name = "qcom-pdc",
> > - .of_match_table = qcom_pdc_match_table,
> > - .suppress_bind_attrs = true,
> > - },
> > -};
> > -module_platform_driver(qcom_pdc_driver);
> > +IRQCHIP_PLATFORM_DRIVER_BEGIN(qcom_pdc)
> > +IRQCHIP_MATCH("qcom,pdc", qcom_pdc_init)
> > +IRQCHIP_PLATFORM_DRIVER_END(qcom_pdc)
> > MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Power Domain Controller");
> > MODULE_LICENSE("GPL v2");
>
> <sigh>
> So this is where I bashfully admit I didn't get a chance to try this
> patch series out, as I had success with a much older version of
> Saravana's macro magic.
>
> But unfortunately, now that this has landed in mainline, I'm seeing
> boot regressions on db845c. :( This is in the non-modular case,
> building the driver in.
Does that mean the modular version is working? Or you haven't tried
that yet? I'll wait for your reply before I try to fix it. I don't
have the hardware, but it should be easy to guess this issue looking
at the code delta.
I've not yet tested with modules with your patch.
The only significant change from what your probe function is doing is
this snippet. But it'd be surprising if this only affects the builtin
case.
+ if (par_np == np)
+ par_np = NULL;
+
+ /*
+ * If there's a parent interrupt controller and none of the parent
irq
+ * domains have been registered, that means the parent interrupt
+ * controller has not been initialized yet. it's not time for this
+ * interrupt controller to initialize. So, defer probe of this
+ * interrupt controller. The actual initialization callback of this
+ * interrupt controller can check for specific domains as necessary.
+ */
+ if (par_np && !irq_find_matching_host(np, DOMAIN_BUS_ANY))
+ return -EPROBE_DEFER;
Yep. We're getting caught on the irq_find_matching_host() check. I'm a
little lost as when I look at the qcom,pdc node in the dtsi its not
under a parent controller (instead the soc node).
Not sure if that's an issue in the dtsi or if par_np check needs to
ignore the soc node and pass null?
I think you have nailed it. This checks for a domain attached to
the driver we are about to probe, and this domain cannot possibly
exist. Instead, it is the *parent* this should check for, as we
depend on it for successful probing.
Can you please give this a go?
Thanks,
M.
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
index 1bb0e36c2bf3..d2341153e181 100644
--- a/drivers/irqchip/irqchip.c
+++ b/drivers/irqchip/irqchip.c
@@ -52,7 +52,7 @@ int platform_irqchip_probe(struct platform_device
*pdev)
* interrupt controller. The actual initialization callback of this
* interrupt controller can check for specific domains as necessary.
*/
- if (par_np && !irq_find_matching_host(np, DOMAIN_BUS_ANY))
+ if (par_np && !irq_find_matching_host(par_np, DOMAIN_BUS_ANY))
return -EPROBE_DEFER;
return irq_init_cb(np, par_np);
--
Jazz is not dead. It just smells funny...
