Re: [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 04, 2020 at 01:37:33PM +0530, Rohit kumar wrote:
> Update lpass-cpu binding with yaml formats.
> 
> Signed-off-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 130 ---------------
>  .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 179 +++++++++++++++++++++
>  2 files changed, 179 insertions(+), 130 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> deleted file mode 100644
> index c07202c..00000000
> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> +++ /dev/null
> @@ -1,130 +0,0 @@
> -* Qualcomm Technologies LPASS CPU DAI
> -
> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
> -
> -Required properties:
> -
> -- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
> -			  "qcom,sc7180-lpass-cpu"
> -- clocks		: Must contain an entry for each entry in clock-names.
> -- clock-names		: A list which must include the following entries:
> -				* "ahbix-clk"
> -				* "mi2s-osr-clk"
> -				* "mi2s-bit-clk"
> -			: required clocks for "qcom,lpass-cpu-apq8016"
> -				* "ahbix-clk"
> -				* "mi2s-bit-clk0"
> -				* "mi2s-bit-clk1"
> -				* "mi2s-bit-clk2"
> -				* "mi2s-bit-clk3"
> -				* "pcnoc-mport-clk"
> -				* "pcnoc-sway-clk"
> -			: required clocks for "qcom,lpass-cpu-sc7180"
> -				* "audio-core"
> -				* "mclk0"
> -				* "mi2s-bit-clk0"
> -				* "mi2s-bit-clk1"
> -				* "pcnoc-sway-clk"
> -				* "pcnoc-mport-clk"
> -
> -- interrupts		: Must contain an entry for each entry in
> -			  interrupt-names.
> -- interrupt-names	: A list which must include the following entries:
> -				* "lpass-irq-lpaif"
> -- pinctrl-N		: One property must exist for each entry in
> -			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
> -			  for details of the property values.
> -- pinctrl-names		: Must contain a "default" entry.
> -- reg			: Must contain an address for each entry in reg-names.
> -- reg-names		: A list which must include the following entries:
> -				* "lpass-lpaif"
> -- #address-cells	: Must be 1
> -- #size-cells		: Must be 0
> -
> -
> -
> -Optional properties:
> -
> -- qcom,adsp		: Phandle for the audio DSP node
> -
> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
> -
> -Required properties for each DAI (represented by a subnode):
> -- reg			: Must be one of the DAI IDs
> -			  (usually part of dt-bindings header)
> -- qcom,playback-sd-lines: List of serial data lines to use for playback
> -			  Each SD line should be represented by a number from 0-3.
> -- qcom,capture-sd-lines	: List of serial data lines to use for capture
> -			  Each SD line should be represented by a number from 0-3.
> -
> -Note that adding a subnode changes the default to "no lines configured",
> -so both playback and capture lines should be configured when a subnode is added.
> -
> -Examples:
> -1)
> -
> -lpass@28100000 {
> -	compatible = "qcom,lpass-cpu";
> -	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
> -	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
> -	interrupts = <0 85 1>;
> -	interrupt-names = "lpass-irq-lpaif";
> -	pinctrl-names = "default", "idle";
> -	pinctrl-0 = <&mi2s_default>;
> -	pinctrl-1 = <&mi2s_idle>;
> -	reg = <0x28100000 0x10000>;
> -	reg-names = "lpass-lpaif";
> -	qcom,adsp = <&adsp>;
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -
> -	/* Optional to set different MI2S SD lines */
> -	dai@3 {
> -		reg = <MI2S_QUATERNARY>;
> -		qcom,playback-sd-lines = <0 1>;
> -	};
> -};
> -
> -2)
> -
> -#include <dt-bindings/sound/sc7180-lpass.h>
> -
> -lpass_cpu: lpass {
> -	compatible = "qcom,sc7180-lpass-cpu";
> -
> -	reg = <0 0x62F00000 0 0x29000>;
> -
> -	iommus = <&apps_smmu 0x1020 0>;
> -
> -	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> -	clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
> -	clock-names = "pcnoc-sway-clk", "audio-core",
> -			"mclk0", "pcnoc-mport-clk",
> -			"mi2s-bit-clk0", "mi2s-bit-clk1";
> -	interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
> -	interrupt-names = "lpass-irq-lpaif";
> -
> -
> -	#sound-dai-cells = <1>;
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -
> -	mi2s-primary@0 {
> -		reg = <MI2S_PRIMARY>;
> -		qcom,playback-sd-lines = <1>;
> -		qcom,capture-sd-lines = <0>;
> -	};
> -
> -	mi2s-secondary@1 {
> -		reg = <MI2S_SECONDARY>;
> -		qcom,playback-sd-lines = <0>;
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> new file mode 100644
> index 00000000..5c1881d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> @@ -0,0 +1,179 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> +  - Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
> +
> +description: |
> +  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
> +  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
> +  is a module to configure Low-Power Audio Interface(LPAIF) core registers
> +  across different IP versions.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,lpass-cpu
> +      - qcom,apq8016-lpass-cpu
> +      - qcom,sc7180-lpass-cpu
> +
> +  reg:
> +    maxItems: 1
> +    description: LPAIF core registers
> +
> +  clocks:
> +    minItems: 3
> +    maxItems: 6
> +
> +  clock-names:
> +    minItems: 3
> +    maxItems: 6
> +
> +  interrupts:
> +    maxItems: 1
> +    description: LPAIF DMA buffer interrupt
> +
> +  qcom,adsp:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle for the audio DSP node
> +
> +  iommus:
> +    maxItems: 1
> +    description: Phandle to apps_smmu node with sid mask
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  "(^mi2s-[0-9a-f]$|mi2s)":

I believe this will work:

"^mi2s(-[0-9a-f])?$"

> +    type: object
> +    description: Required properties for each DAI
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +        description: Must be one of the DAI ID
> +
> +    required:
> +      - reg

       additionalProperties: false

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - '#sound-dai-cells'
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,lpass-cpu
> +
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: ahbix-clk
> +            - const: mi2s-osr-clk
> +            - const: mi2s-bit-clk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,apq8016-lpass-cpu
> +
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: ahbix-clk
> +            - const: mi2s-bit-clk0
> +            - const: mi2s-bit-clk1
> +            - const: mi2s-bit-clk2
> +            - const: mi2s-bit-clk3
> +            - const: pcnoc-mport-clk
> +            - const: pcnoc-sway-clk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,sc7180-lpass-cpu
> +
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: pcnoc-sway-clk
> +            - const: audio-core
> +            - const: mclk0
> +            - const: pcnoc-mport-clk
> +            - const: mi2s-bit-clk0
> +            - const: mi2s-bit-clk1
> +      required:
> +        - iommus
> +        - power-domains
> +
> +examples:
> +  - |
> +    #include <dt-bindings/sound/sc7180-lpass.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        lpass@62f00000 {
> +            compatible = "qcom,sc7180-lpass-cpu";
> +
> +            reg = <0 0x62f00000  0 0x29000>;
> +
> +            iommus = <&apps_smmu 0x1020 0>;
> +            power-domains = <&lpass_hm 0>;
> +
> +            clocks = <&gcc 131>,
> +                 <&lpasscorecc 6>,
> +                 <&lpasscorecc 7>,
> +                 <&lpasscorecc 10>,
> +                 <&lpasscorecc 8>,
> +                 <&lpasscorecc 9>;
> +
> +            clock-names = "pcnoc-sway-clk", "audio-core",
> +                          "mclk0", "pcnoc-mport-clk",
> +                          "mi2s-bit-clk0", "mi2s-bit-clk1";
> +
> +            interrupts = <0 160 1>;
> +
> +            #sound-dai-cells = <1>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            /* Optional to set different MI2S SD lines */
> +            mi2s-primary@0 {
> +                reg = <MI2S_PRIMARY>;
> +                qcom,playback-sd-lines = <1>;
> +                qcom,capture-sd-lines = <0>;

These 2 aren't documented.

Rob



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux