PM8150 uses reboot-mode framework to set magic values for bootloader to read during next boot. dm-verity wants to use "dm-verity device corrupted" [1] as the restart command, however the reboot-mode framework does not support spaces in the command line as devicetree property names cannot have spaces. This patch series adds two new optional array properties to reboot-mode framework: reboot-mode-names and reboot-mode-magic. The arrays supply the commands and magic values, respectively. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/md/dm-verity-target.c?h=v5.5#n255 Elliot Berman (4): dt-bindings: power: reset: Convert reboot-mode to YAML dt-bindings: power: reset: Add alternate reboot mode format power: reset: Add support for reboot mode alternate properties arm64: dts: qcom: pm8150: Add reboot magic .../bindings/power/reset/reboot-mode.txt | 25 --------- .../bindings/power/reset/reboot-mode.yaml | 64 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/pm8150.dtsi | 5 ++ drivers/power/reset/reboot-mode.c | 42 +++++++++++++- 4 files changed, 110 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.txt create mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.yaml -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
