From: David Collins <collinsd@xxxxxxxxxxxxxx>
Add support for TEMP_ALARM GEN2 PMIC peripherals with digital
major revision 1. This revision utilizes a different temperature
threshold mapping than earlier revisions.
Signed-off-by: David Collins <collinsd@xxxxxxxxxxxxxx>
Signed-off-by: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
---
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 91 +++++++++++++++++++----------
1 file changed, 61 insertions(+), 30 deletions(-)
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index bf7bae4..05a9601 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -17,6 +17,7 @@
#include "../thermal_core.h"
+#define QPNP_TM_REG_DIG_MAJOR 0x01
#define QPNP_TM_REG_TYPE 0x04
#define QPNP_TM_REG_SUBTYPE 0x05
#define QPNP_TM_REG_STATUS 0x08
@@ -38,26 +39,30 @@
#define ALARM_CTRL_FORCE_ENABLE BIT(7)
-/*
- * Trip point values based on threshold control
- * 0 = {105 C, 125 C, 145 C}
- * 1 = {110 C, 130 C, 150 C}
- * 2 = {115 C, 135 C, 155 C}
- * 3 = {120 C, 140 C, 160 C}
-*/
-#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */
-#define TEMP_STAGE_HYSTERESIS 2000
+#define THRESH_COUNT 4
+#define STAGE_COUNT 3
+
+/* Over-temperature trip point values in mC */
+static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
+ {105000, 125000, 145000},
+ {110000, 130000, 150000},
+ {115000, 135000, 155000},
+ {120000, 140000, 160000},
+};
+
+static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
+ { 90000, 110000, 140000},
+ { 95000, 115000, 145000},
+ {100000, 120000, 150000},
+ {105000, 125000, 155000},
+};
-#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */
-#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
+#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
#define THRESH_MIN 0
#define THRESH_MAX 3
-/* Stage 2 Threshold Min: 125 C */
-#define STAGE2_THRESHOLD_MIN 125000
-/* Stage 2 Threshold Max: 140 C */
-#define STAGE2_THRESHOLD_MAX 140000
+#define TEMP_STAGE_HYSTERESIS 2000
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
#define DEFAULT_TEMP 37000
@@ -77,6 +82,7 @@ struct qpnp_tm_chip {
bool initialized;
struct iio_channel *adc;
+ const long (*temp_map)[THRESH_COUNT][STAGE_COUNT];
};
/* This array maps from GEN2 alarm state to GEN1 alarm stage */
@@ -101,6 +107,23 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
}
/**
+ * qpnp_tm_decode_temp() - return temperature in mC corresponding to the
+ * specified over-temperature stage
+ * @chip: Pointer to the qpnp_tm chip
+ * @stage: Over-temperature stage
+ *
+ * Return: temperature in mC
+ */
+static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
+{
+ if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0
+ || stage > STAGE_COUNT)
+ return 0;
+
+ return (*chip->temp_map)[chip->thresh][stage - 1];
+}
+
+/**
* qpnp_tm_get_temp_stage() - return over-temperature stage
* @chip: Pointer to the qpnp_tm chip
*
@@ -149,14 +172,12 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
if (stage_new > stage_old) {
/* increasing stage, use lower bound */
- chip->temp = (stage_new - 1) * TEMP_STAGE_STEP +
- chip->thresh * TEMP_THRESH_STEP +
- TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
+ chip->temp = qpnp_tm_decode_temp(chip, stage_new)
+ + TEMP_STAGE_HYSTERESIS;
} else if (stage_new < stage_old) {
/* decreasing stage, use upper bound */
- chip->temp = stage_new * TEMP_STAGE_STEP +
- chip->thresh * TEMP_THRESH_STEP -
- TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
+ chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1)
+ - TEMP_STAGE_HYSTERESIS;
}
chip->stage = stage;
@@ -199,26 +220,28 @@ static int qpnp_tm_get_temp(void *data, int *temp)
static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
int temp)
{
- u8 reg;
+ long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
+ long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
bool disable_s2_shutdown = false;
+ u8 reg;
WARN_ON(!mutex_is_locked(&chip->lock));
/*
* Default: S2 and S3 shutdown enabled, thresholds at
- * 105C/125C/145C, monitoring at 25Hz
+ * lowest threshold set, monitoring at 25Hz
*/
reg = SHUTDOWN_CTRL1_RATE_25HZ;
if (temp == THERMAL_TEMP_INVALID ||
- temp < STAGE2_THRESHOLD_MIN) {
+ temp < stage2_threshold_min) {
chip->thresh = THRESH_MIN;
goto skip;
}
- if (temp <= STAGE2_THRESHOLD_MAX) {
+ if (temp <= stage2_threshold_max) {
chip->thresh = THRESH_MAX -
- ((STAGE2_THRESHOLD_MAX - temp) /
+ ((stage2_threshold_max - temp) /
TEMP_THRESH_STEP);
disable_s2_shutdown = true;
} else {
@@ -326,9 +349,7 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
? chip->stage : alarm_state_map[chip->stage];
if (stage)
- chip->temp = chip->thresh * TEMP_THRESH_STEP +
- (stage - 1) * TEMP_STAGE_STEP +
- TEMP_THRESH_MIN;
+ chip->temp = qpnp_tm_decode_temp(chip, stage);
crit_temp = qpnp_tm_get_critical_trip_temp(chip);
ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
@@ -350,7 +371,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
{
struct qpnp_tm_chip *chip;
struct device_node *node;
- u8 type, subtype;
+ u8 type, subtype, dig_major;
u32 res;
int ret, irq;
@@ -400,6 +421,12 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return ret;
}
+ ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not read dig_major\n");
+ return ret;
+ }
+
if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
&& subtype != QPNP_TM_SUBTYPE_GEN2)) {
dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
@@ -408,6 +435,10 @@ static int qpnp_tm_probe(struct platform_device *pdev)
}
chip->subtype = subtype;
+ if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
+ chip->temp_map = &temp_map_gen2_v1;
+ else
+ chip->temp_map = &temp_map_gen1;
/*
* Register the sensor before initializing the hardware to be able to
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
