On 2020-07-16 03:49, Rob Clark wrote:
From: Rob Clark <robdclark@xxxxxxxxxxxx>
If split-lm is used (for ex, on sdm845), we can have multiple ping-
pongs, but only a single phys encoder. We need to configure dithering
on each of them.
Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 22 ++++++++++---------
.../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c | 3 +--
2 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 46df0ff75b85..9b98b63c77fb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -212,14 +212,14 @@ static u32 dither_matrix[DITHER_MATRIX_SZ] = {
15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
};
-static void _dpu_encoder_setup_dither(struct dpu_encoder_phys *phys)
+static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp,
unsigned bpc)
{
struct dpu_hw_dither_cfg dither_cfg = { 0 };
- if (!phys->hw_pp || !phys->hw_pp->ops.setup_dither)
+ if (!hw_pp->ops.setup_dither)
return;
- switch (phys->connector->display_info.bpc) {
+ switch (bpc) {
case 6:
dither_cfg.c0_bitdepth = 6;
dither_cfg.c1_bitdepth = 6;
@@ -228,14 +228,14 @@ static void _dpu_encoder_setup_dither(struct
dpu_encoder_phys *phys)
dither_cfg.temporal_en = 0;
break;
default:
- phys->hw_pp->ops.setup_dither(phys->hw_pp, NULL);
+ hw_pp->ops.setup_dither(hw_pp, NULL);
return;
}
memcpy(&dither_cfg.matrix, dither_matrix,
sizeof(u32) * DITHER_MATRIX_SZ);
- phys->hw_pp->ops.setup_dither(phys->hw_pp, &dither_cfg);
+ hw_pp->ops.setup_dither(hw_pp, &dither_cfg);
}
void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys
*phys_enc,
@@ -1132,11 +1132,13 @@ static void
_dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
_dpu_encoder_update_vsync_source(dpu_enc, &dpu_enc->disp_info);
- if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI) {
- for (i = 0; i < dpu_enc->num_phys_encs; i++) {
- struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
-
- _dpu_encoder_setup_dither(phys);
+ if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI &&
+ !WARN_ON(dpu_enc->num_phys_encs == 0)) {
+ unsigned bpc = dpu_enc->phys_encs[0]->connector->display_info.bpc;
+ for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
+ if (!dpu_enc->hw_pp[i])
+ continue;
+ _dpu_encoder_setup_dither(dpu_enc->hw_pp[i], bpc);
}
}
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
index 7411ab6bf6af..bea4ab5c58c5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
@@ -231,8 +231,7 @@ static void _setup_pingpong_ops(struct
dpu_hw_pingpong *c,
c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
c->ops.get_line_count = dpu_hw_pp_get_line_count;
- if (test_bit(DPU_PINGPONG_DITHER, &features) &&
- IS_SC7180_TARGET(c->hw.hwversion))
+ if (test_bit(DPU_PINGPONG_DITHER, &features))
c->ops.setup_dither = dpu_hw_pp_setup_dither;
};
Change looks good to me
- Kalyan
