[PATCH 09/10] arm64: dts: qcom: msm8916: Set default pinctrl for blsp1_uart1/2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Right now some device nodes set default pinctrl within msm8916.dtsi
(e.g. I2C, SPI), but for others it needs to be explicitly set in the
board-specific device tree (e.g. UART).

While it is theoretically possible that some super special board
needs different pinctrl for these, in practice pretty much every
board ends up using the common pinctrl definitions.

Make this consistent by also defining the common pinctrl properties
for blsp1_uart1 and blsp1_uart2 so we don't need to copy this for every
board. If there is really such a super special board it could just
override these properties with custom pinctrl or make minor modifications
to the common pinctrl configurations provided by msm8916-pins.dtsi.

Also move #address-cells/#size-cells for &dsi0 to msm8916.dtsi
since this is specific to the DSI node, not the board.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi                | 8 --------
 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts     | 4 ----
 arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi                | 3 ---
 .../boot/dts/qcom/msm8916-samsung-a2015-common.dtsi      | 7 -------
 arch/arm64/boot/dts/qcom/msm8916.dtsi                    | 9 +++++++++
 5 files changed, 9 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 91852f929141..1ecc49e36319 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -235,19 +235,11 @@ &blsp_spi5 {
 &blsp1_uart1 {
 	status = "okay";
 	label = "LS-UART0";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart1_default>;
-	pinctrl-1 = <&blsp1_uart1_sleep>;
 };
 
 &blsp1_uart2 {
 	status = "okay";
 	label = "LS-UART1";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart2_default>;
-	pinctrl-1 = <&blsp1_uart2_sleep>;
 };
 
 &camss {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 8a6a9cd4a3fe..dec5e3ba7df4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -54,10 +54,6 @@ volume-up {
 
 &blsp1_uart2 {
 	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart2_default>;
-	pinctrl-1 = <&blsp1_uart2_sleep>;
 };
 
 &pm8916_resin {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index 9c4926326f21..1bd05046cdeb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -18,7 +18,4 @@ chosen {
 
 &blsp1_uart2 {
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart2_default>;
-	pinctrl-1 = <&blsp1_uart2_sleep>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index f1ddb23ac3c3..eb667f4b0e05 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -115,16 +115,9 @@ magnetometer@12 {
 
 &blsp1_uart2 {
 	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart2_default>;
-	pinctrl-1 = <&blsp1_uart2_sleep>;
 };
 
 &dsi0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mdss_default>;
 	pinctrl-1 = <&mdss_sleep>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 141348a92788..273faffab369 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -487,6 +487,9 @@ blsp1_uart1: serial@78af000 {
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
 			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -513,6 +516,9 @@ blsp1_uart2: serial@78b0000 {
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
 			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
 			status = "disabled";
 		};
 
@@ -1113,6 +1119,9 @@ dsi0: dsi@1a98000 {
 				phys = <&dsi_phy0>;
 				phy-names = "dsi-phy";
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux