cr_bllcd can turn backlight ON or OFF.
Fix semantitics so they equals what we know from gpio-backlight.
brightness == 0 => backlight off
brightness == 1 => backlight on
Use the backlight_get_brightness() helper to simplify the code.
v2:
- reworked to introduce gpio-backlight semantics (Daniel)
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
Cc: Jingoo Han <jingoohan1@xxxxxxxxx>
---
drivers/video/backlight/cr_bllcd.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
index 4624b7b7c6a6..a24d42e1ea3c 100644
--- a/drivers/video/backlight/cr_bllcd.c
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -63,22 +63,15 @@ static int cr_backlight_set_intensity(struct backlight_device *bd)
u32 addr = gpio_bar + CRVML_PANEL_PORT;
u32 cur = inl(addr);
- if (bd->props.power == FB_BLANK_UNBLANK)
- intensity = FB_BLANK_UNBLANK;
- if (bd->props.fb_blank == FB_BLANK_UNBLANK)
- intensity = FB_BLANK_UNBLANK;
- if (bd->props.power == FB_BLANK_POWERDOWN)
- intensity = FB_BLANK_POWERDOWN;
- if (bd->props.fb_blank == FB_BLANK_POWERDOWN)
- intensity = FB_BLANK_POWERDOWN;
-
- if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */
- cur &= ~CRVML_BACKLIGHT_OFF;
- outl(cur, addr);
- } else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */
+ if (backlight_get_brightness(bd) == 0) {
+ /* OFF */
cur |= CRVML_BACKLIGHT_OFF;
outl(cur, addr);
- } /* anything else, don't bother */
+ } else {
+ /* FULL ON */
+ cur &= ~CRVML_BACKLIGHT_OFF;
+ outl(cur, addr);
+ }
return 0;
}
@@ -90,9 +83,9 @@ static int cr_backlight_get_intensity(struct backlight_device *bd)
u8 intensity;
if (cur & CRVML_BACKLIGHT_OFF)
- intensity = FB_BLANK_POWERDOWN;
+ intensity = 0;
else
- intensity = FB_BLANK_UNBLANK;
+ intensity = 1;
return intensity;
}
--
2.25.1
